Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: Possible Flexible and some remote working potentials. Want to join a company with over 30 years of experience in designing, manufacturing, and delivering highly bespoke simulator solutions? Join a reputable business who's most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Join a team at an exciting time, at the start of re-defining their systems, with the opportunity to influence and shape the product! The Opportunity Perform requirements analysis and requirements derivation to generate understandable, and robust firmware requirements from inbound (user and systems level) requirements. In doing so, provide feedback to the systems team regarding poorly written, ambiguous, or unverifiable inbound requirements. Produce high quality and robust Firmware designs and architectures to meet the Firmware requirements and Interface specifications. Produce design, development and implementation documentation including specifications, reports and proposals of a quality commensurate with its end use. Produce documentation to show requirement traceability including verification methodologies. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Ensure that the Firmware development process is conducted in accordance with the Firmware development plan. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents; will often chair technical reviews for significant deliverables. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used in the Firmware development and propose changes. Implementing these changes where appropriate. The role may involve line management responsibility. Manage security of information as defined in the Security manual. Where requested provides feedback on firmware development status and cost to complete to the Project Manager and/or Engineering Project Lead (or equivalent) Undertake the role of firmware lead, where requested. In this role, technically manage a team of firmware engineers ensuring they have clear objectives with agreed realisation dates. Essential Role requirements Willing and able to obtain, and maintain, SC security clearance. Willing and able to obtain, and maintain, DV security clearance. Qualifications / Skills required Degree in an engineering, mathematical or science-based subject or equivalent experience. Fully Proficient in the full life cycle Firmware development demonstrated on more than one project. Fully Proficient in Firmware development using VHDL. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to design for synchronous and asynchronous systems. For example, System Synchronous, Source Synchronous and Asynchronous systems. Ability to provide technical leadership to a team of Firmware engineers in the design and development of FPGAs. Thorough experience of using Xilinx, Lattice, Altera or Microsemi FPGAs and their associated development tool chains. Proficient in Verification. Good knowledge of FPGA EDA tools and tool flow. Proficient in the use of industry standard communications protocols associated with communication interfaces (UARTs, USARTs, SPI, I2C, TCP/IP, UDP). Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Desirable Experience of/exposure to best practice firmware development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Exposure to coding standards for defence, space or air worthiness techniques and standards such as MISRA. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For more detail, please get in touch!
Apr 19, 2024
Full time
Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: Possible Flexible and some remote working potentials. Want to join a company with over 30 years of experience in designing, manufacturing, and delivering highly bespoke simulator solutions? Join a reputable business who's most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Join a team at an exciting time, at the start of re-defining their systems, with the opportunity to influence and shape the product! The Opportunity Perform requirements analysis and requirements derivation to generate understandable, and robust firmware requirements from inbound (user and systems level) requirements. In doing so, provide feedback to the systems team regarding poorly written, ambiguous, or unverifiable inbound requirements. Produce high quality and robust Firmware designs and architectures to meet the Firmware requirements and Interface specifications. Produce design, development and implementation documentation including specifications, reports and proposals of a quality commensurate with its end use. Produce documentation to show requirement traceability including verification methodologies. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Ensure that the Firmware development process is conducted in accordance with the Firmware development plan. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents; will often chair technical reviews for significant deliverables. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used in the Firmware development and propose changes. Implementing these changes where appropriate. The role may involve line management responsibility. Manage security of information as defined in the Security manual. Where requested provides feedback on firmware development status and cost to complete to the Project Manager and/or Engineering Project Lead (or equivalent) Undertake the role of firmware lead, where requested. In this role, technically manage a team of firmware engineers ensuring they have clear objectives with agreed realisation dates. Essential Role requirements Willing and able to obtain, and maintain, SC security clearance. Willing and able to obtain, and maintain, DV security clearance. Qualifications / Skills required Degree in an engineering, mathematical or science-based subject or equivalent experience. Fully Proficient in the full life cycle Firmware development demonstrated on more than one project. Fully Proficient in Firmware development using VHDL. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to design for synchronous and asynchronous systems. For example, System Synchronous, Source Synchronous and Asynchronous systems. Ability to provide technical leadership to a team of Firmware engineers in the design and development of FPGAs. Thorough experience of using Xilinx, Lattice, Altera or Microsemi FPGAs and their associated development tool chains. Proficient in Verification. Good knowledge of FPGA EDA tools and tool flow. Proficient in the use of industry standard communications protocols associated with communication interfaces (UARTs, USARTs, SPI, I2C, TCP/IP, UDP). Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Desirable Experience of/exposure to best practice firmware development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Exposure to coding standards for defence, space or air worthiness techniques and standards such as MISRA. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For more detail, please get in touch!
Overview Are you a Systems Engineer looking for your next challenge? Do you have experience across Integration, Verification, Validation and / or Test? Our client are looking for a number of Systems Engineers, across all levels from Junior - Senior expertise to join a successful division, who are set for great growth in 2024! We are looking for Systems Integration & Verification / Validation Engineer click apply for full job details
Apr 19, 2024
Full time
Overview Are you a Systems Engineer looking for your next challenge? Do you have experience across Integration, Verification, Validation and / or Test? Our client are looking for a number of Systems Engineers, across all levels from Junior - Senior expertise to join a successful division, who are set for great growth in 2024! We are looking for Systems Integration & Verification / Validation Engineer click apply for full job details
An exciting opportunity has arisen for a Principal Hardware Engineer based in Coventry. An R&D company based in with HQ in Hereford and R&D site in Coventry, designing complex electronics products / systems, are looking for a Principal Hardware Engineer. You will help grow the engineering team based in new premises and will have recent experience of a regulated industry, such as Fire, Medical, Aviation, and be able to bring process and rigour to the HW development process. The successful candidate for the Principal Hardware Engineer based in Coventry will have: 1st class Honours degree in Electronics Engineering from a well-known engineering university. Understanding of robust engineering principles and the need for a high-level of thoroughness to ensure the product is fit for purpose e.g., Requirements capturing, design documentation, creation of development boards, thorough verification testing, front-end analysis. Background in a regulated industry (e.g., Fire, medical, aviation, aeronautics, automotive, defence). Experience designing RF products and taking a project though the full product development lifecycle, from initial spec to validation. Good understanding of analogue circuits - analogue front ends, Sensor signal acquisition Experience of low current battery powered devices. At least 10 Years post-graduate experience. This is a great chance for a Principal Hardware Engineer to work with a growing, exciting new team. APPLY NOW! For the Principal Hardware Engineer position, based in Coventry, please send your CV to , or for more information contact Brett on / .
Apr 19, 2024
Full time
An exciting opportunity has arisen for a Principal Hardware Engineer based in Coventry. An R&D company based in with HQ in Hereford and R&D site in Coventry, designing complex electronics products / systems, are looking for a Principal Hardware Engineer. You will help grow the engineering team based in new premises and will have recent experience of a regulated industry, such as Fire, Medical, Aviation, and be able to bring process and rigour to the HW development process. The successful candidate for the Principal Hardware Engineer based in Coventry will have: 1st class Honours degree in Electronics Engineering from a well-known engineering university. Understanding of robust engineering principles and the need for a high-level of thoroughness to ensure the product is fit for purpose e.g., Requirements capturing, design documentation, creation of development boards, thorough verification testing, front-end analysis. Background in a regulated industry (e.g., Fire, medical, aviation, aeronautics, automotive, defence). Experience designing RF products and taking a project though the full product development lifecycle, from initial spec to validation. Good understanding of analogue circuits - analogue front ends, Sensor signal acquisition Experience of low current battery powered devices. At least 10 Years post-graduate experience. This is a great chance for a Principal Hardware Engineer to work with a growing, exciting new team. APPLY NOW! For the Principal Hardware Engineer position, based in Coventry, please send your CV to , or for more information contact Brett on / .
An exciting opportunity to join the team at Thrive as a Software developer! Thrive-AI provides an end- to end solution that is used to help clients operate their buildings efficiently, reduce energy consumption, save money, eliminate redundancy in design and optimise the lifespan of critical assets. At Thrive, we design, procure, install and commission intelligent building systems, we develop software and provide software services to capture high volumes of building data in real time and we use this to deliver the actionable insight and control for the clients. The role: As a software developer at Thrive you will join the software team in the testing and development of Thrive-AI Edge Application, Thrive-AI Web Application, Thrive-AI Cloud software backend, Thrive-AI API and provide general support and testing of the Thrive-AI platform. The responsibilities of a software developer at Thrive: Implement high-quality software, from designs and architectures Employ automation to appropriate tasks to improve development efficiency Write, review and debug code when needed Curate automated validation and verification testing processes and procedures Collaborate with internal teams, vendors, and customers to improve products Keeping abreast of latest technology to ensure our software is always up-to-date Key skills Proven experience as a Software Engineer Knowledge of software development methodologies and tooling Knowledge of selected programming languages. Primarily Typescript and Python, but also Java Web frameworks such as Angular and Flask, Experienced with containerisation technology and platforms; Docker and Kubernetes Awareness of NoSQL databases ; MongoDB and Redis Experience with automation of CI/CD pipelines. Awareness of Github Actions and FluxCD BSc/BA in Computer Science or a related degree If you join Thrive as a Software Developer, you will have the autonomy to take your career in whichever direction you choose alongside fantastic colleagues who will support you along the way. Benefits: Thrive believes in investing in our teams and promoting from within, giving each team member the opportunity to reach their highest potential. Therefore, as an employee of Thrive you will receive an extensive range of benefits! If you feel that you have what it takes to succeed in not only the role of a Software Developer at Thrive but also in a company that values their staff and their career development then apply today- we would love to hear from you!
Apr 18, 2024
Full time
An exciting opportunity to join the team at Thrive as a Software developer! Thrive-AI provides an end- to end solution that is used to help clients operate their buildings efficiently, reduce energy consumption, save money, eliminate redundancy in design and optimise the lifespan of critical assets. At Thrive, we design, procure, install and commission intelligent building systems, we develop software and provide software services to capture high volumes of building data in real time and we use this to deliver the actionable insight and control for the clients. The role: As a software developer at Thrive you will join the software team in the testing and development of Thrive-AI Edge Application, Thrive-AI Web Application, Thrive-AI Cloud software backend, Thrive-AI API and provide general support and testing of the Thrive-AI platform. The responsibilities of a software developer at Thrive: Implement high-quality software, from designs and architectures Employ automation to appropriate tasks to improve development efficiency Write, review and debug code when needed Curate automated validation and verification testing processes and procedures Collaborate with internal teams, vendors, and customers to improve products Keeping abreast of latest technology to ensure our software is always up-to-date Key skills Proven experience as a Software Engineer Knowledge of software development methodologies and tooling Knowledge of selected programming languages. Primarily Typescript and Python, but also Java Web frameworks such as Angular and Flask, Experienced with containerisation technology and platforms; Docker and Kubernetes Awareness of NoSQL databases ; MongoDB and Redis Experience with automation of CI/CD pipelines. Awareness of Github Actions and FluxCD BSc/BA in Computer Science or a related degree If you join Thrive as a Software Developer, you will have the autonomy to take your career in whichever direction you choose alongside fantastic colleagues who will support you along the way. Benefits: Thrive believes in investing in our teams and promoting from within, giving each team member the opportunity to reach their highest potential. Therefore, as an employee of Thrive you will receive an extensive range of benefits! If you feel that you have what it takes to succeed in not only the role of a Software Developer at Thrive but also in a company that values their staff and their career development then apply today- we would love to hear from you!
AWE is currently recruiting for Finite Element Analysis Engineers The Engineering Analysis Team support AWE's mission by providing a range of computational mechanics services to the business, such as finite element analysis (FEA), computational fluid dynamics (CFD), thermal and blast analysis. The team work on challenging, weapons-related projects which underpin continuous-at-sea-deterrence and contribute to the security of the nation. We have multiple vacancies for finite element analysis (FEA) engineers, at both junior and senior levels, to work on a variety of exciting and unique structural mechanics and thermal analysis projects. Location: Aldermaston, West Berkshire. We are located between Reading and Basingstoke, with onsite parking. Salary : 34,000 - 65,000 (depending on your suitability and level of experience) Closing date: 5th May 2024 The Role The types of analysis the team undertake are varied and may include: Linear and non-linear static structural stress analysis Transient dynamic explicit analysis Frequency-domain analysis (modal, harmonic, shock response, etc.) Coupled multi-physics e.g. fluid-structure interaction Transient and steady-state thermal analysis Who Are We Looking For? A degree-level background in a STEM subject is preferred. The Engineering Analysis Team has a diverse set of skills, and we welcome applications from candidates who can demonstrate knowledge or experience in one or more of the following areas: Use of finite element analysis codes such as ANSYS, Abaqus, LS-DYNA, etc. to solve structural and thermal analysis problems Use of pre-processors such as Hypermesh, ANSYS Mechanical, Abaqus/CAE, etc. to prepare geometry and construct finite element meshes Use of Python scripting for automating pre-/post-processing of finite element models and for analysis workflow efficiency Performing model verification and validation (V&V) activities such as mesh convergence studies, comparison to hand-calculation and comparison to experimental tests Use of Linux-based high-performance computing (HPC) clusters to solve large finite element models To be considered for the senior roles, we would like you to be able to demonstrate experience of: Conducting research and development of new and novel techniques in the field of engineering simulation Providing technical leadership and leading outreach initiatives with academia and industrial partners Mentoring junior analysts and reviewing analysis work Consulting with customers to understand their modelling and simulation requirements and translate these into packages of analysis work Candidates must be willing and able to travel within the UK and overseas as required. What Will You Get From Us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Important things you need to know: You must be a UK national who has been resident in the UK for the past 10 years. Interviews will be 90 minutes in length and will be held over Microsoft Teams. You will be required to prepare a 10-minute presentation in advance. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role. This will be funded by AWE. Agencies: Please note that we do not out-source our recruitment
Apr 18, 2024
Full time
AWE is currently recruiting for Finite Element Analysis Engineers The Engineering Analysis Team support AWE's mission by providing a range of computational mechanics services to the business, such as finite element analysis (FEA), computational fluid dynamics (CFD), thermal and blast analysis. The team work on challenging, weapons-related projects which underpin continuous-at-sea-deterrence and contribute to the security of the nation. We have multiple vacancies for finite element analysis (FEA) engineers, at both junior and senior levels, to work on a variety of exciting and unique structural mechanics and thermal analysis projects. Location: Aldermaston, West Berkshire. We are located between Reading and Basingstoke, with onsite parking. Salary : 34,000 - 65,000 (depending on your suitability and level of experience) Closing date: 5th May 2024 The Role The types of analysis the team undertake are varied and may include: Linear and non-linear static structural stress analysis Transient dynamic explicit analysis Frequency-domain analysis (modal, harmonic, shock response, etc.) Coupled multi-physics e.g. fluid-structure interaction Transient and steady-state thermal analysis Who Are We Looking For? A degree-level background in a STEM subject is preferred. The Engineering Analysis Team has a diverse set of skills, and we welcome applications from candidates who can demonstrate knowledge or experience in one or more of the following areas: Use of finite element analysis codes such as ANSYS, Abaqus, LS-DYNA, etc. to solve structural and thermal analysis problems Use of pre-processors such as Hypermesh, ANSYS Mechanical, Abaqus/CAE, etc. to prepare geometry and construct finite element meshes Use of Python scripting for automating pre-/post-processing of finite element models and for analysis workflow efficiency Performing model verification and validation (V&V) activities such as mesh convergence studies, comparison to hand-calculation and comparison to experimental tests Use of Linux-based high-performance computing (HPC) clusters to solve large finite element models To be considered for the senior roles, we would like you to be able to demonstrate experience of: Conducting research and development of new and novel techniques in the field of engineering simulation Providing technical leadership and leading outreach initiatives with academia and industrial partners Mentoring junior analysts and reviewing analysis work Consulting with customers to understand their modelling and simulation requirements and translate these into packages of analysis work Candidates must be willing and able to travel within the UK and overseas as required. What Will You Get From Us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Important things you need to know: You must be a UK national who has been resident in the UK for the past 10 years. Interviews will be 90 minutes in length and will be held over Microsoft Teams. You will be required to prepare a 10-minute presentation in advance. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role. This will be funded by AWE. Agencies: Please note that we do not out-source our recruitment
Important: Due to the nature of the role, all candidates will need to be prepared to undertake DV clearance and therefore as a minimum be living in the UK 10 years. Working: Possible Flexible and some remote working potentials. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Full range of company benefits, flexible working, training, development and clear career progression! The Opportunity We protect highly sensitive information, working with nations worldwide to help ensure their information is secure as possible. Our engineers work on the most difficult cybersecurity challenges to protect our national security and critical infrastructure; we strive to protect what matters. Carrying out Safety and Reliability activities associated with Cyber UK products as part of our engineering team, within the Cyber UK Business Unit, delivering multiple concurrent research, development and production programmes ranging from tens of k to several m. Responsible for / Key responsibilities Perform requirements and design assessments to ensure that hazards are identified, assessed, eliminated and/or controlled in a systematic way through the development life cycle. Carry out safety and reliability activities (hazard analysis, safety assessment analysis, failure mode analysis, generating FMEA/FMECA) with the goal of prevention, detection and correction of design anomalies, weak parts and workmanship, thereby influencing the design and development of Cyber UK products. As this role covers a wide range of experience the successful candidate will have a good foundation in Safety and Reliability engineering and is passionate about furthering their learning and development within the Safety and Reliability discipline. Produce safety and reliability documentation, including planning documents, in line with company standards to meet project requirements. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used by engineering development and propose changes. Experience with the following Defence standards: Def Stan 00-56, 00-40, 00-45, 00-45, MIL-STD 1629, MIL-HDB 217F, ARP4761 (for Airbourne Products) Manage security of information as defined in the Security manual. Experience in some of the following areas would be advantageous, but not mandatory to be considered for this role. Capability to review electronic design and development within a Safety and Reliability context. Understanding and experience of data capture in terms of Technical Publications, Training, Contractor Logistic Support (CLS), Integrated Logistics Support (ILS), Logistic Support Analysis (LSA) and WLC/LCC Awareness of supportability aspects of a programme. Essential Qualifications / Skills Degree in an engineering, mathematical or science-based subject or equivalent experience Proficient in the full life cycle development demonstrated multiple projects. Proficient in safety & reliability tools e.g. for developing FMEA / FMECA. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Pro-active and self-motivated with good problem solving experience. Learns quickly, willing to think "outside the box" using rigorous logic and methods to solve complex problems Helpful and assistive approach to resolution of technical challenges and understands the need to change where necessary and adjusts accordingly. Desirable Qualifications / Skills Experience of/exposure to best practice development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For full information, please get in touch.
Apr 18, 2024
Full time
Important: Due to the nature of the role, all candidates will need to be prepared to undertake DV clearance and therefore as a minimum be living in the UK 10 years. Working: Possible Flexible and some remote working potentials. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Full range of company benefits, flexible working, training, development and clear career progression! The Opportunity We protect highly sensitive information, working with nations worldwide to help ensure their information is secure as possible. Our engineers work on the most difficult cybersecurity challenges to protect our national security and critical infrastructure; we strive to protect what matters. Carrying out Safety and Reliability activities associated with Cyber UK products as part of our engineering team, within the Cyber UK Business Unit, delivering multiple concurrent research, development and production programmes ranging from tens of k to several m. Responsible for / Key responsibilities Perform requirements and design assessments to ensure that hazards are identified, assessed, eliminated and/or controlled in a systematic way through the development life cycle. Carry out safety and reliability activities (hazard analysis, safety assessment analysis, failure mode analysis, generating FMEA/FMECA) with the goal of prevention, detection and correction of design anomalies, weak parts and workmanship, thereby influencing the design and development of Cyber UK products. As this role covers a wide range of experience the successful candidate will have a good foundation in Safety and Reliability engineering and is passionate about furthering their learning and development within the Safety and Reliability discipline. Produce safety and reliability documentation, including planning documents, in line with company standards to meet project requirements. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used by engineering development and propose changes. Experience with the following Defence standards: Def Stan 00-56, 00-40, 00-45, 00-45, MIL-STD 1629, MIL-HDB 217F, ARP4761 (for Airbourne Products) Manage security of information as defined in the Security manual. Experience in some of the following areas would be advantageous, but not mandatory to be considered for this role. Capability to review electronic design and development within a Safety and Reliability context. Understanding and experience of data capture in terms of Technical Publications, Training, Contractor Logistic Support (CLS), Integrated Logistics Support (ILS), Logistic Support Analysis (LSA) and WLC/LCC Awareness of supportability aspects of a programme. Essential Qualifications / Skills Degree in an engineering, mathematical or science-based subject or equivalent experience Proficient in the full life cycle development demonstrated multiple projects. Proficient in safety & reliability tools e.g. for developing FMEA / FMECA. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Pro-active and self-motivated with good problem solving experience. Learns quickly, willing to think "outside the box" using rigorous logic and methods to solve complex problems Helpful and assistive approach to resolution of technical challenges and understands the need to change where necessary and adjusts accordingly. Desirable Qualifications / Skills Experience of/exposure to best practice development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For full information, please get in touch.
Our esteemed client, a trusted partner of the UK Ministry of Defence, are seeking a proficient Software Engineer with expertise in C# and C++. The role entails integrating real products, models, and synthetic environments to offer visualisations, demonstrations, verification and validation, training capability and support. As a Software Engineer, you will be a part of a crucial team that plays a pivotal role in developing weapon systems and system architectures. The WSSE team has developed a unique capability that supports developments across the full product life cycle. What we're looking for: Proficient/Expert in C# / C++ Microsoft Visual Studio, Eclipse, Capacity to function from high level/system view into technical detail. Outstanding verbal, presentation, and written communication skills Knowledge of using Microsoft Windows and Linux operating systems Non-essential Distributed simulation standards / Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes What you'll get to do as a Software Engineer C++: This job involves supporting the development of advanced defence systems from the initial concept to in-service support and training. You'll use various simulation technologies like digital twins and emulators to create end-to-end representations of weapon systems in synthetic environments. You'll collaborate with project leads and simulation architects to develop simulation components using C#, C++, and integration simulations, adhering to industry standards. You'll be part of an agile development team of engineers from different disciplines, working together to create simulations and representations of actual equipment. Our approach to software development includes Configuration control Continuous Integration Continuous Delivery or Deployment. Unit testing and test-driven development. More about the role: Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This role is based in Bristol their state of the art site, which plays a key part in missiles operations. The location offers excellent transportation links, outstanding learning and development opportunities, and social, charitable, and sporting activities. Guidant Global is acting as an Employment Business in relation to this vacancy.
Apr 18, 2024
Full time
Our esteemed client, a trusted partner of the UK Ministry of Defence, are seeking a proficient Software Engineer with expertise in C# and C++. The role entails integrating real products, models, and synthetic environments to offer visualisations, demonstrations, verification and validation, training capability and support. As a Software Engineer, you will be a part of a crucial team that plays a pivotal role in developing weapon systems and system architectures. The WSSE team has developed a unique capability that supports developments across the full product life cycle. What we're looking for: Proficient/Expert in C# / C++ Microsoft Visual Studio, Eclipse, Capacity to function from high level/system view into technical detail. Outstanding verbal, presentation, and written communication skills Knowledge of using Microsoft Windows and Linux operating systems Non-essential Distributed simulation standards / Protocols (DIS, HLA, DDS) and web services development (JavaScript, Node JS or similar) Military Communications, Datalinks and Interfaces such as 1553/1760 and Ethernet TCP/IP Practical knowledge of System integration principles and processes What you'll get to do as a Software Engineer C++: This job involves supporting the development of advanced defence systems from the initial concept to in-service support and training. You'll use various simulation technologies like digital twins and emulators to create end-to-end representations of weapon systems in synthetic environments. You'll collaborate with project leads and simulation architects to develop simulation components using C#, C++, and integration simulations, adhering to industry standards. You'll be part of an agile development team of engineers from different disciplines, working together to create simulations and representations of actual equipment. Our approach to software development includes Configuration control Continuous Integration Continuous Delivery or Deployment. Unit testing and test-driven development. More about the role: Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air. This role is based in Bristol their state of the art site, which plays a key part in missiles operations. The location offers excellent transportation links, outstanding learning and development opportunities, and social, charitable, and sporting activities. Guidant Global is acting as an Employment Business in relation to this vacancy.
What if you could work with remarkable people on extraordinary things? What if the end result was something a little bit special? What if your role was mission critical? For nearly 70 years, AWE has been at the forefront of nuclear weapons research and development. We have a critical mission: to provide the warheads for the UK s ultimate deterrent - Trident. We also use our unique skills to provide wider UK government with counter-terrorism and nuclear threat reduction solutions. It takes a special sort of person to work at AWE. What if that person was you? Systems Engineers (Warhead Containers) AWE have exciting new opportunities for Systems Engineers with experience in requirements definition, functional and physical architectural design, model-based systems engineering and verification and validation. As a member of the WH containers team, successful candidates will be required to support projects developing, procuring, and testing new designs in support both current and future programmes. These projects vary from component level to full system design. Candidates will be motivated, delivery focused engineers, capable of working within a team and engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. An appreciation of the company procedures and processes would be beneficial but not essential. Location - Reading Salary: £35,720 - £50,800 (dependent on experience) Closing Date: 23rd April 2024 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Candidates will be team players who are proactive in nature and happy to work across a variety of projects. Systems Engineers within the Warhead Containers team work on design projects developing defining requirements, apportioning operational, safety and security functionalities across the system and identify the verification methods required. Engineers will be required to travel as part of the role in support of trials, customer interface, external meetings with suppliers and domestic and international R&D projects. The team works on multiple projects from the concept phase, into service and through to disposal and are responsible for: Requirements generation Mechanical Design using CAD software (preferably Seimens NX) Producing Engineering Drawings Supporting the development of Concept of Operations Carrying out Verification and Validation activities (including both onsite and offsite trials management) Stakeholder Engagement with other (international and domestic) government agencies and regulators The development and delivery of viable technical solutions that meet customer requirements Leading / Supporting project reviews for internal programmes and external contracts, including providing written reports and verbal briefs to management and stakeholders. These are excellent and exciting opportunities to join a multi-disciplinary team with a range of experiences. These roles will provide the successful candidates with a wider appreciation of the UK s nuclear weapon enterprise, responsibility in delivering CASD and cross enterprise engagement at all levels. To be considered for these roles, we would like you to have a degree or higher qualification in an engineering discipline OR proven equivalent experience working in a similar environment. An appreciation of Systems Engineering methods, tools and processes will be required. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel. Please note that you must be a British Citizen to apply for a role with us. Our ambition is to create workplaces where we recognise and celebrate differences, encourage diverse contributions and our employees feel able to be themselves at work. We strive to create a genuine culture of openness and inclusion and encourage diverse applicants. Any inclusion information you provide us will be used to encourage and support you through the application process and will be held only for this purpose in accordance with GDPR.
Apr 18, 2024
Full time
What if you could work with remarkable people on extraordinary things? What if the end result was something a little bit special? What if your role was mission critical? For nearly 70 years, AWE has been at the forefront of nuclear weapons research and development. We have a critical mission: to provide the warheads for the UK s ultimate deterrent - Trident. We also use our unique skills to provide wider UK government with counter-terrorism and nuclear threat reduction solutions. It takes a special sort of person to work at AWE. What if that person was you? Systems Engineers (Warhead Containers) AWE have exciting new opportunities for Systems Engineers with experience in requirements definition, functional and physical architectural design, model-based systems engineering and verification and validation. As a member of the WH containers team, successful candidates will be required to support projects developing, procuring, and testing new designs in support both current and future programmes. These projects vary from component level to full system design. Candidates will be motivated, delivery focused engineers, capable of working within a team and engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. An appreciation of the company procedures and processes would be beneficial but not essential. Location - Reading Salary: £35,720 - £50,800 (dependent on experience) Closing Date: 23rd April 2024 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Candidates will be team players who are proactive in nature and happy to work across a variety of projects. Systems Engineers within the Warhead Containers team work on design projects developing defining requirements, apportioning operational, safety and security functionalities across the system and identify the verification methods required. Engineers will be required to travel as part of the role in support of trials, customer interface, external meetings with suppliers and domestic and international R&D projects. The team works on multiple projects from the concept phase, into service and through to disposal and are responsible for: Requirements generation Mechanical Design using CAD software (preferably Seimens NX) Producing Engineering Drawings Supporting the development of Concept of Operations Carrying out Verification and Validation activities (including both onsite and offsite trials management) Stakeholder Engagement with other (international and domestic) government agencies and regulators The development and delivery of viable technical solutions that meet customer requirements Leading / Supporting project reviews for internal programmes and external contracts, including providing written reports and verbal briefs to management and stakeholders. These are excellent and exciting opportunities to join a multi-disciplinary team with a range of experiences. These roles will provide the successful candidates with a wider appreciation of the UK s nuclear weapon enterprise, responsibility in delivering CASD and cross enterprise engagement at all levels. To be considered for these roles, we would like you to have a degree or higher qualification in an engineering discipline OR proven equivalent experience working in a similar environment. An appreciation of Systems Engineering methods, tools and processes will be required. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel. Please note that you must be a British Citizen to apply for a role with us. Our ambition is to create workplaces where we recognise and celebrate differences, encourage diverse contributions and our employees feel able to be themselves at work. We strive to create a genuine culture of openness and inclusion and encourage diverse applicants. Any inclusion information you provide us will be used to encourage and support you through the application process and will be held only for this purpose in accordance with GDPR.
AWE is currently recruiting for Finite Element Analysis Engineers The Engineering Analysis Team support AWE's mission by providing a range of computational mechanics services to the business, such as finite element analysis (FEA), computational fluid dynamics (CFD), thermal and blast analysis. The team work on challenging, weapons-related projects which underpin continuous-at-sea-deterrence and contribute to the security of the nation. We have multiple vacancies for finite element analysis (FEA) engineers, at both junior and senior levels, to work on a variety of exciting and unique structural mechanics and thermal analysis projects. Location: Aldermaston, West Berkshire. We are located between Reading and Basingstoke, with onsite parking. Salary : 34,000 - 65,000 (depending on your suitability and level of experience) Closing date: 5th May 2024 The Role The types of analysis the team undertake are varied and may include: Linear and non-linear static structural stress analysis Transient dynamic explicit analysis Frequency-domain analysis (modal, harmonic, shock response, etc.) Coupled multi-physics e.g. fluid-structure interaction Transient and steady-state thermal analysis Who Are We Looking For? A degree-level background in a STEM subject is preferred. The Engineering Analysis Team has a diverse set of skills, and we welcome applications from candidates who can demonstrate knowledge or experience in one or more of the following areas: Use of finite element analysis codes such as ANSYS, Abaqus, LS-DYNA, etc. to solve structural and thermal analysis problems Use of pre-processors such as Hypermesh, ANSYS Mechanical, Abaqus/CAE, etc. to prepare geometry and construct finite element meshes Use of Python scripting for automating pre-/post-processing of finite element models and for analysis workflow efficiency Performing model verification and validation (V&V) activities such as mesh convergence studies, comparison to hand-calculation and comparison to experimental tests Use of Linux-based high-performance computing (HPC) clusters to solve large finite element models To be considered for the senior roles, we would like you to be able to demonstrate experience of: Conducting research and development of new and novel techniques in the field of engineering simulation Providing technical leadership and leading outreach initiatives with academia and industrial partners Mentoring junior analysts and reviewing analysis work Consulting with customers to understand their modelling and simulation requirements and translate these into packages of analysis work Candidates must be willing and able to travel within the UK and overseas as required. What Will You Get From Us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Important things you need to know: You must be a UK national who has been resident in the UK for the past 10 years. Interviews will be 90 minutes in length and will be held over Microsoft Teams. You will be required to prepare a 10-minute presentation in advance. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role. This will be funded by AWE. Agencies: Please note that we do not out-source our recruitment
Apr 18, 2024
Full time
AWE is currently recruiting for Finite Element Analysis Engineers The Engineering Analysis Team support AWE's mission by providing a range of computational mechanics services to the business, such as finite element analysis (FEA), computational fluid dynamics (CFD), thermal and blast analysis. The team work on challenging, weapons-related projects which underpin continuous-at-sea-deterrence and contribute to the security of the nation. We have multiple vacancies for finite element analysis (FEA) engineers, at both junior and senior levels, to work on a variety of exciting and unique structural mechanics and thermal analysis projects. Location: Aldermaston, West Berkshire. We are located between Reading and Basingstoke, with onsite parking. Salary : 34,000 - 65,000 (depending on your suitability and level of experience) Closing date: 5th May 2024 The Role The types of analysis the team undertake are varied and may include: Linear and non-linear static structural stress analysis Transient dynamic explicit analysis Frequency-domain analysis (modal, harmonic, shock response, etc.) Coupled multi-physics e.g. fluid-structure interaction Transient and steady-state thermal analysis Who Are We Looking For? A degree-level background in a STEM subject is preferred. The Engineering Analysis Team has a diverse set of skills, and we welcome applications from candidates who can demonstrate knowledge or experience in one or more of the following areas: Use of finite element analysis codes such as ANSYS, Abaqus, LS-DYNA, etc. to solve structural and thermal analysis problems Use of pre-processors such as Hypermesh, ANSYS Mechanical, Abaqus/CAE, etc. to prepare geometry and construct finite element meshes Use of Python scripting for automating pre-/post-processing of finite element models and for analysis workflow efficiency Performing model verification and validation (V&V) activities such as mesh convergence studies, comparison to hand-calculation and comparison to experimental tests Use of Linux-based high-performance computing (HPC) clusters to solve large finite element models To be considered for the senior roles, we would like you to be able to demonstrate experience of: Conducting research and development of new and novel techniques in the field of engineering simulation Providing technical leadership and leading outreach initiatives with academia and industrial partners Mentoring junior analysts and reviewing analysis work Consulting with customers to understand their modelling and simulation requirements and translate these into packages of analysis work Candidates must be willing and able to travel within the UK and overseas as required. What Will You Get From Us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Important things you need to know: You must be a UK national who has been resident in the UK for the past 10 years. Interviews will be 90 minutes in length and will be held over Microsoft Teams. You will be required to prepare a 10-minute presentation in advance. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role. This will be funded by AWE. Agencies: Please note that we do not out-source our recruitment
Overview Are you a Systems Engineer looking for your next challenge? Do you have experience across Integration, Verification, Validation and / or Test? Our client are looking for a number of Systems Engineers, across all levels from Junior - Senior expertise to join a successful division, who are set for great growth in 2024! We are looking for Systems Integration & Verification / Validation Engineer click apply for full job details
Apr 18, 2024
Full time
Overview Are you a Systems Engineer looking for your next challenge? Do you have experience across Integration, Verification, Validation and / or Test? Our client are looking for a number of Systems Engineers, across all levels from Junior - Senior expertise to join a successful division, who are set for great growth in 2024! We are looking for Systems Integration & Verification / Validation Engineer click apply for full job details
JOB - Senior Electrical Design Engineer LOCATION - London TERM - Permanent SALARY - circa £50,000 - £55,000 per annum A London based Renewables company are looking for a Senior Electrical Design Engineer to join their team on a permanent basis. The Senior Electrical Design Engineer will ideally have the following attributes: 2 years' minimum experience designing electrical systems. Knowledge of hazardous area regulations/ qualifications such as ATEX. Previous experience with single phase & 3 phase systems. Proficiency with design packages such as Solidworks & AutoCAD Electrical. Advanced programming languages such as C++ & Python (not essential) The Senior Electrical Design Engineer's duties will involve: The design & installation of electrical systems. Creation of testing documentation, BOMs, schematics, technical drawings & manuals etc. Verification & validation testing. The leading of safety assessments such as HAZOPs. If you are interested in this Electrical Design Engineering position, please apply with an up-to-date CV as soon as possible, along with your availability and salary expectation.
Apr 18, 2024
Full time
JOB - Senior Electrical Design Engineer LOCATION - London TERM - Permanent SALARY - circa £50,000 - £55,000 per annum A London based Renewables company are looking for a Senior Electrical Design Engineer to join their team on a permanent basis. The Senior Electrical Design Engineer will ideally have the following attributes: 2 years' minimum experience designing electrical systems. Knowledge of hazardous area regulations/ qualifications such as ATEX. Previous experience with single phase & 3 phase systems. Proficiency with design packages such as Solidworks & AutoCAD Electrical. Advanced programming languages such as C++ & Python (not essential) The Senior Electrical Design Engineer's duties will involve: The design & installation of electrical systems. Creation of testing documentation, BOMs, schematics, technical drawings & manuals etc. Verification & validation testing. The leading of safety assessments such as HAZOPs. If you are interested in this Electrical Design Engineering position, please apply with an up-to-date CV as soon as possible, along with your availability and salary expectation.
Principal Electrical Design Engineer Minimum of 10 years of relevant electrical design experience Whippendell Marine is a long-established supplier of LV electrical engineering solutions for the naval environment. We specialise in the design, manufacture and support of motor starters, control systems, aviation ground power systems, cabinets, racks and enclosures for surface and sub-surface platforms. The company is currently expanding and winning new business across a variety of platforms and now needs a principal electrical engineer with a minimum of 10 years of LV electrical design experience to provide the technical lead and design authority roles currently undertaken by the managing director. You will work with other engineers on specific projects, but also provide support and advise across the business, including sales and manufacturing. You will be a technical point of contact for our customers. The role is responsible for delivering the electrical design aspects of electro-mechanical products, cabinets, enclosures, consoles and similar equipment, ruggedised specifically for the harsh marine environment and providing documented validation and verification activities for the designs undertaken. The position will report to the Engineering and Operations Director and will be based at out Milton Keynes Office. There will be scope for flexible working, where project requirements permit. Please note that because of the defence related nature of our business you will be required to undergo security clearance vetting and will need to meet special nationality rules. Therefore, this vacancy is only open to British Citizens. If you have experience in a similar role and skills and qualifications for this job then please apply and submit a covering letter to the Engineering and Operations Director explaining why you are the best candidate for the position. Key Duties: Design and development of electrical equipment and systems through the whole lifecycle (requirements, development, drawings, calculations, specifications, compliance, and reports). To take ownership of the electrical aspects of projects and provide technical support to the project manager and customer. Develop electrical drawings, parts lists, layouts and manufacturing data, and providing input into enclosure design. Adhere to the design control activities within the company quality management system. Assist with the production of ILS information, including manuals, maintenance procedures, spares provisioning and training materials. Reviewing legacy equipment in respect of current standards, obsolescence and design. Providing the Design Authority role within the Company and providing technical help and assistance to more junior engineers and other staff. Key Skills and Experience: Broadly experience electrical engineer with experience in design, development, commissioning and supporting LV motor control, power distribution and control systems. Ability to produce detailed designs from a customer specification applying appropriate standards and regulations, selection of components through to specification of test schedules. Competent in the use of AutoCAD / AutoCAD Electrical in producing schematic and single line diagrams for electrical systems. Qualified to degree level or equivalent with a minimum of 10 years demonstrable experience. A background in the naval, marine or defence sectors would be a benefit. Effective written and verbal communicator; able to produce high quality technical documents and reports sometimes for inclusion in tender responses and submissions to customers. Excellent communicator at all levels. Able to achieve SC security clearance. History. Whippendell Marine can trace its history back over 120 years and since 1935 we have been supplying the Royal Navy and others with specialist electrical equipment into harsh environments such as ships and submarines. We manufacture a wide and diverse range of products and are a small and friendly team. Benefits. Salary 60k to 75k depending on experience. Flexible working arrangements - Half-day Fridays, compressing hours for occasional Friday's off, plus other elements. Company pension scheme with employer contributions Life insurance Payment of professional fees. 33 days holiday per year including bank holidays. Private off-street parking Modern, bright, clean and friendly environment Staff rest area with kitchen, sofas, TV Free coffee and tea If you have experience in a similar role and skills and qualifications for this job then please apply and submit a covering letter to the Engineering and Operations Director explaining why you are the best candidate for the position. Reference ID: EDE1
Apr 18, 2024
Full time
Principal Electrical Design Engineer Minimum of 10 years of relevant electrical design experience Whippendell Marine is a long-established supplier of LV electrical engineering solutions for the naval environment. We specialise in the design, manufacture and support of motor starters, control systems, aviation ground power systems, cabinets, racks and enclosures for surface and sub-surface platforms. The company is currently expanding and winning new business across a variety of platforms and now needs a principal electrical engineer with a minimum of 10 years of LV electrical design experience to provide the technical lead and design authority roles currently undertaken by the managing director. You will work with other engineers on specific projects, but also provide support and advise across the business, including sales and manufacturing. You will be a technical point of contact for our customers. The role is responsible for delivering the electrical design aspects of electro-mechanical products, cabinets, enclosures, consoles and similar equipment, ruggedised specifically for the harsh marine environment and providing documented validation and verification activities for the designs undertaken. The position will report to the Engineering and Operations Director and will be based at out Milton Keynes Office. There will be scope for flexible working, where project requirements permit. Please note that because of the defence related nature of our business you will be required to undergo security clearance vetting and will need to meet special nationality rules. Therefore, this vacancy is only open to British Citizens. If you have experience in a similar role and skills and qualifications for this job then please apply and submit a covering letter to the Engineering and Operations Director explaining why you are the best candidate for the position. Key Duties: Design and development of electrical equipment and systems through the whole lifecycle (requirements, development, drawings, calculations, specifications, compliance, and reports). To take ownership of the electrical aspects of projects and provide technical support to the project manager and customer. Develop electrical drawings, parts lists, layouts and manufacturing data, and providing input into enclosure design. Adhere to the design control activities within the company quality management system. Assist with the production of ILS information, including manuals, maintenance procedures, spares provisioning and training materials. Reviewing legacy equipment in respect of current standards, obsolescence and design. Providing the Design Authority role within the Company and providing technical help and assistance to more junior engineers and other staff. Key Skills and Experience: Broadly experience electrical engineer with experience in design, development, commissioning and supporting LV motor control, power distribution and control systems. Ability to produce detailed designs from a customer specification applying appropriate standards and regulations, selection of components through to specification of test schedules. Competent in the use of AutoCAD / AutoCAD Electrical in producing schematic and single line diagrams for electrical systems. Qualified to degree level or equivalent with a minimum of 10 years demonstrable experience. A background in the naval, marine or defence sectors would be a benefit. Effective written and verbal communicator; able to produce high quality technical documents and reports sometimes for inclusion in tender responses and submissions to customers. Excellent communicator at all levels. Able to achieve SC security clearance. History. Whippendell Marine can trace its history back over 120 years and since 1935 we have been supplying the Royal Navy and others with specialist electrical equipment into harsh environments such as ships and submarines. We manufacture a wide and diverse range of products and are a small and friendly team. Benefits. Salary 60k to 75k depending on experience. Flexible working arrangements - Half-day Fridays, compressing hours for occasional Friday's off, plus other elements. Company pension scheme with employer contributions Life insurance Payment of professional fees. 33 days holiday per year including bank holidays. Private off-street parking Modern, bright, clean and friendly environment Staff rest area with kitchen, sofas, TV Free coffee and tea If you have experience in a similar role and skills and qualifications for this job then please apply and submit a covering letter to the Engineering and Operations Director explaining why you are the best candidate for the position. Reference ID: EDE1
Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK 5 years. Working: Flexible working hours and some remote working potentials where possible. It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance Interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking group's and communities across the business advocating Equity, Diversity and Inclusion. The Navigation Algorithm Design Engineer will be working on fast-moving projects to develop and evaluate navigation algorithms. Researching, developing, testing and evaluating algorithms as part of the wider complex system solution. The successful candidate will be part of a dynamic team within the Guidance, Control and Navigation Department and will get the opportunity to work across a range of contract and research activities hence impact multiple areas of deliveries within the business. Navigation algorithms are central to the design and development of the companies complex systems products. Algorithms are developed at many stages of the lifecycle of the product including: Research studies, both externally and internally funded, to investigate algorithms for future developments Algorithms to support initial missile feasibility and concept studies Algorithms in support of assessment and development programmes Algorithms to support upgrades for in-service products. Experience needed: Strong programming skills are required including MATLAB Degree qualified with a strong mathematical content e.g. Aerospace Engineering, Control Engineering, Mechanical Engineering, Mathematics, Physics or related subject. Previous demonstrable programming, real-time implementation, validation & verification and navigation experience. Relevant experience with the state-of-the-arts navigation algorithms, Navigation Algorithm design, comparative evaluation and testing is a strong advantage. For full information, please get in touch!
Apr 18, 2024
Full time
Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK 5 years. Working: Flexible working hours and some remote working potentials where possible. It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance Interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking group's and communities across the business advocating Equity, Diversity and Inclusion. The Navigation Algorithm Design Engineer will be working on fast-moving projects to develop and evaluate navigation algorithms. Researching, developing, testing and evaluating algorithms as part of the wider complex system solution. The successful candidate will be part of a dynamic team within the Guidance, Control and Navigation Department and will get the opportunity to work across a range of contract and research activities hence impact multiple areas of deliveries within the business. Navigation algorithms are central to the design and development of the companies complex systems products. Algorithms are developed at many stages of the lifecycle of the product including: Research studies, both externally and internally funded, to investigate algorithms for future developments Algorithms to support initial missile feasibility and concept studies Algorithms in support of assessment and development programmes Algorithms to support upgrades for in-service products. Experience needed: Strong programming skills are required including MATLAB Degree qualified with a strong mathematical content e.g. Aerospace Engineering, Control Engineering, Mechanical Engineering, Mathematics, Physics or related subject. Previous demonstrable programming, real-time implementation, validation & verification and navigation experience. Relevant experience with the state-of-the-arts navigation algorithms, Navigation Algorithm design, comparative evaluation and testing is a strong advantage. For full information, please get in touch!
AWE have exciting new opportunities for experienced Mechanical Engineers with background in design, manufacture, and trials as well as an understanding of systems engineering and project / product delivery. As a member of the Warhead Containers team, successful candidates will be required to carry out projects, developing, procuring and testing new designs in support both current and future programmes. These projects vary from component level to full system design. Role: Mechanical Engineer Location: Reading Salary: 35,720 - 51,000 (depending on your suitability and level of experience) Closing Date: 16th May 2024 The Role? Candidates will need to be team players who are proactive in nature and happy to work across a variety of projects, engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. Mechanical Engineers within the Warhead Containers team work on design projects developing mechanical and thermal solutions as well as supporting interfaces to electrical systems. Engineers are required to travel as part of the role in support of, trials, customer interactions, external meetings with suppliers, domestic and international R&D projects. As a mechanical engineer within the WH containers team, you will be responsible for: Requirements generation. Mechanical Design using CAD software (preferably Seimens NX) and producing associated engineering drawings. Identify the Concept of Operations and opportunities for improvements associated with handling, processing and storage of containers and associated contents. Conducting Verification and Validation activities (including both onsite and offsite trials management) The development and delivery of viable technical solutions that meet customer requirements Leading / Supporting project reviews for internal programmes and external contracts, including providing written reports and verbal briefs to management and stakeholders. This division of Warhead Engineering is responsible for maintaining the current container system, ensuring it is safe, secure, serviceable and meets the demands of both internal and external stakeholders, as well as supporting the development of future container systems. The team work on multiple projects from concept phase, into service and through to disposal. The team is responsible for: Ownership and Design Management of the current container system. Through life management of the current container system and its associated design. Conducting Verification and qualification activities. Developing capabilities for future container systems and investigating new verification methods. Stakeholder Engagement with other (international and domestic) government agencies and regulators Ensure the enterprise has the required capabilities to support the enduring container programme. What will you get from us? As part of our People Promise, AWE ( one of the best 25 big companies to work for in the UK ) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration This is an excellent and exciting opportunity to join a multi-disciplinary team with a range of experiences. As a member of the Warhead Engineering community this role provides exceptional opportunities for development through technical, functional and project leadership. The role will provide the successful candidate with a wider appreciation of the UK's nuclear weapon enterprise, responsibility in delivering CASD and cross enterprise engagement at all levels. To be considered for the role, you will have a degree or higher qualification in an engineering discipline OR proven equivalent experience working in a similar environment. An appreciation of Mechanical Engineering methods, tools and processes will be required. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel.
Apr 18, 2024
Full time
AWE have exciting new opportunities for experienced Mechanical Engineers with background in design, manufacture, and trials as well as an understanding of systems engineering and project / product delivery. As a member of the Warhead Containers team, successful candidates will be required to carry out projects, developing, procuring and testing new designs in support both current and future programmes. These projects vary from component level to full system design. Role: Mechanical Engineer Location: Reading Salary: 35,720 - 51,000 (depending on your suitability and level of experience) Closing Date: 16th May 2024 The Role? Candidates will need to be team players who are proactive in nature and happy to work across a variety of projects, engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. Mechanical Engineers within the Warhead Containers team work on design projects developing mechanical and thermal solutions as well as supporting interfaces to electrical systems. Engineers are required to travel as part of the role in support of, trials, customer interactions, external meetings with suppliers, domestic and international R&D projects. As a mechanical engineer within the WH containers team, you will be responsible for: Requirements generation. Mechanical Design using CAD software (preferably Seimens NX) and producing associated engineering drawings. Identify the Concept of Operations and opportunities for improvements associated with handling, processing and storage of containers and associated contents. Conducting Verification and Validation activities (including both onsite and offsite trials management) The development and delivery of viable technical solutions that meet customer requirements Leading / Supporting project reviews for internal programmes and external contracts, including providing written reports and verbal briefs to management and stakeholders. This division of Warhead Engineering is responsible for maintaining the current container system, ensuring it is safe, secure, serviceable and meets the demands of both internal and external stakeholders, as well as supporting the development of future container systems. The team work on multiple projects from concept phase, into service and through to disposal. The team is responsible for: Ownership and Design Management of the current container system. Through life management of the current container system and its associated design. Conducting Verification and qualification activities. Developing capabilities for future container systems and investigating new verification methods. Stakeholder Engagement with other (international and domestic) government agencies and regulators Ensure the enterprise has the required capabilities to support the enduring container programme. What will you get from us? As part of our People Promise, AWE ( one of the best 25 big companies to work for in the UK ) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration This is an excellent and exciting opportunity to join a multi-disciplinary team with a range of experiences. As a member of the Warhead Engineering community this role provides exceptional opportunities for development through technical, functional and project leadership. The role will provide the successful candidate with a wider appreciation of the UK's nuclear weapon enterprise, responsibility in delivering CASD and cross enterprise engagement at all levels. To be considered for the role, you will have a degree or higher qualification in an engineering discipline OR proven equivalent experience working in a similar environment. An appreciation of Mechanical Engineering methods, tools and processes will be required. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel.
What if you could work with remarkable people on extraordinary things? What if the end result was something a little bit special? What if your role was mission critical? For nearly 70 years, AWE has been at the forefront of nuclear weapons research and development. We have a critical mission: to provide the warheads for the UK s ultimate deterrent - Trident. We also use our unique skills to provide wider UK government with counter-terrorism and nuclear threat reduction solutions. It takes a special sort of person to work at AWE. What if that person was you? AWE are looking for Senior Mechanical Engineers (Warhead Containers) We have exciting new opportunities for Senior Mechanical Engineers with a background in design, manufacture and trials to work within the AWE Warhead Containers team. Successful candidates will be required to apply their mechanical engineering expertise to support and deliver projects for both future and in-service programmes. These projects vary across the product lifecycle from deriving requirements, developing conceptual designs and architectures, testing and verification activities required to introduce products into service. Role: Senior Mechanical Engineers (Warhead Containers) Location: Reading Salary: £44,990 - £67,000 (dependent of experience) Closing Date: 07th May 2024 The Role? As a senior engineer, you will support the definition of the future WH Container strategy, identifying the capabilities required for delivery. In addition there will be opportunities for strong involvement in the associated systems engineering deliverables. This role will offer great career development opportunities across technical, team and project leadership. Candidates will need to be delivery focused engineers, capable of both leading and working within teams, engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. This division of Warhead Engineering is responsible for maintaining the current container system, ensuring it is safe, secure, serviceable and meets the demands of both internal and external stakeholders, as well as supporting the development of a future container system. The team work on multiple projects from the concept phase, into service and through to disposal and are responsible for: Ownership and Design Management of the current container system Through life management of the current container system and its associated design Carrying out Verification and Validation activities (including both onsite and offsite trials management) Developing capabilities for future container systems and investigating new verification methods Stakeholder Engagement with other (international and domestic) government agencies and regulators Ensure the enterprise has the required capabilities to support the enduring container programme To be considered for these roles, you will have a degree or higher qualification in an engineering discipline or proven equivalent experience working in a similar environment. An appreciation of Systems Engineering methods, tools and processes will be required. What will you get from us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel. Please note that you must be a British Citizen to apply for a role with us. Our ambition is to create workplaces where we recognise and celebrate differences, encourage diverse contributions and our employees feel able to be themselves at work. We strive to create a genuine culture of openness and inclusion and encourage diverse applicants. Any inclusion information you provide us will be used to encourage and support you through the application process and will be held only for this purpose in accordance with GDPR.
Apr 18, 2024
Full time
What if you could work with remarkable people on extraordinary things? What if the end result was something a little bit special? What if your role was mission critical? For nearly 70 years, AWE has been at the forefront of nuclear weapons research and development. We have a critical mission: to provide the warheads for the UK s ultimate deterrent - Trident. We also use our unique skills to provide wider UK government with counter-terrorism and nuclear threat reduction solutions. It takes a special sort of person to work at AWE. What if that person was you? AWE are looking for Senior Mechanical Engineers (Warhead Containers) We have exciting new opportunities for Senior Mechanical Engineers with a background in design, manufacture and trials to work within the AWE Warhead Containers team. Successful candidates will be required to apply their mechanical engineering expertise to support and deliver projects for both future and in-service programmes. These projects vary across the product lifecycle from deriving requirements, developing conceptual designs and architectures, testing and verification activities required to introduce products into service. Role: Senior Mechanical Engineers (Warhead Containers) Location: Reading Salary: £44,990 - £67,000 (dependent of experience) Closing Date: 07th May 2024 The Role? As a senior engineer, you will support the definition of the future WH Container strategy, identifying the capabilities required for delivery. In addition there will be opportunities for strong involvement in the associated systems engineering deliverables. This role will offer great career development opportunities across technical, team and project leadership. Candidates will need to be delivery focused engineers, capable of both leading and working within teams, engaging with various stakeholders from different disciplines, internal and external to the nuclear weapons enterprise. This division of Warhead Engineering is responsible for maintaining the current container system, ensuring it is safe, secure, serviceable and meets the demands of both internal and external stakeholders, as well as supporting the development of a future container system. The team work on multiple projects from the concept phase, into service and through to disposal and are responsible for: Ownership and Design Management of the current container system Through life management of the current container system and its associated design Carrying out Verification and Validation activities (including both onsite and offsite trials management) Developing capabilities for future container systems and investigating new verification methods Stakeholder Engagement with other (international and domestic) government agencies and regulators Ensure the enterprise has the required capabilities to support the enduring container programme To be considered for these roles, you will have a degree or higher qualification in an engineering discipline or proven equivalent experience working in a similar environment. An appreciation of Systems Engineering methods, tools and processes will be required. What will you get from us? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to undertake occasional travel. Please note that you must be a British Citizen to apply for a role with us. Our ambition is to create workplaces where we recognise and celebrate differences, encourage diverse contributions and our employees feel able to be themselves at work. We strive to create a genuine culture of openness and inclusion and encourage diverse applicants. Any inclusion information you provide us will be used to encourage and support you through the application process and will be held only for this purpose in accordance with GDPR.
Verification Engineer on Contract Cambridge, UK(Hybrid) Job Description:We are looking for an experienced Verification Engineer to join our client Hardware Platform team on a contract basis. The team is based in Cambridge, UK, and we are working at the forefront of embedded design centering on Arm IP products. We build physical hardware development platforms, based around Arm's custom system-on-chip (SoC) and FPGAs. The platforms are used for software development and validation activities for both our external partners/customers and our internal development teams.Responsibilities: System Verification: Develop and maintain SoC verification testbench in SystemVerilog. Expericence with coding System Verilog Assertions (SVA) checks, cover-properties, SV coverage groups.Programming and debugging C test cases to verify IP integration into the system, including reusing and translating it from RTL subsystem verification environment for FPGA verification.Familiarity in working on UNIX/LINUX environment and being able to use command line based applications and experience in working with scripting languages like Python, Tcl, Makefiles, bash etc.Required Skills and Experience :Excellent theoretical and practical experience of RTL Verification utilising SystemVerilog, including SVA.Proficiency in C programming plus, ideally, some grounding in assembly language (ideally Arm assembler) and object-orientated coding (e.g. C++)Skilled in simulation Tools: Verdi/VCS, QuestaSim and Cadence tools.Confident user of a UNIX environment and shell programming/scripting in e.g. Makefile, Python, Tcl, sh, bash.Comprehension and use of data formats such as YAML and JSON.Practical embedded software knowledge to test and debug designs.Experienced with the implementation of ASIC/SoC RTL in FPGAReal hands-on expertise in debugging sophisticated designsSolid understanding of AMBA bus standardsA creative and structured approach to problem-solving "Nice To Have" Skills and Experience : Experience working with SV UVM test benches, using UVM Verification IPs (VIP) (Desirable/Optional)Working with version control and project management/bug tracking systems such as SVN/Git and Jira.Xilinx FPGA technology.Synopsys tool flows.Experience using Arm DS5 / DSTREAM debugger (Desirable/Optional)Excellent written and spoken English; can write coherent documentation If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Apr 18, 2024
Contractor
Verification Engineer on Contract Cambridge, UK(Hybrid) Job Description:We are looking for an experienced Verification Engineer to join our client Hardware Platform team on a contract basis. The team is based in Cambridge, UK, and we are working at the forefront of embedded design centering on Arm IP products. We build physical hardware development platforms, based around Arm's custom system-on-chip (SoC) and FPGAs. The platforms are used for software development and validation activities for both our external partners/customers and our internal development teams.Responsibilities: System Verification: Develop and maintain SoC verification testbench in SystemVerilog. Expericence with coding System Verilog Assertions (SVA) checks, cover-properties, SV coverage groups.Programming and debugging C test cases to verify IP integration into the system, including reusing and translating it from RTL subsystem verification environment for FPGA verification.Familiarity in working on UNIX/LINUX environment and being able to use command line based applications and experience in working with scripting languages like Python, Tcl, Makefiles, bash etc.Required Skills and Experience :Excellent theoretical and practical experience of RTL Verification utilising SystemVerilog, including SVA.Proficiency in C programming plus, ideally, some grounding in assembly language (ideally Arm assembler) and object-orientated coding (e.g. C++)Skilled in simulation Tools: Verdi/VCS, QuestaSim and Cadence tools.Confident user of a UNIX environment and shell programming/scripting in e.g. Makefile, Python, Tcl, sh, bash.Comprehension and use of data formats such as YAML and JSON.Practical embedded software knowledge to test and debug designs.Experienced with the implementation of ASIC/SoC RTL in FPGAReal hands-on expertise in debugging sophisticated designsSolid understanding of AMBA bus standardsA creative and structured approach to problem-solving "Nice To Have" Skills and Experience : Experience working with SV UVM test benches, using UVM Verification IPs (VIP) (Desirable/Optional)Working with version control and project management/bug tracking systems such as SVN/Git and Jira.Xilinx FPGA technology.Synopsys tool flows.Experience using Arm DS5 / DSTREAM debugger (Desirable/Optional)Excellent written and spoken English; can write coherent documentation If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Project Quality Leader Mission : We are seeking an Offer Project Quality Leader to develop the team accountability and, as every team member is responsible for the Excellence of the Customer Experience, Quality, Reliability and Safety activities. Manage the Issue to Prevention actions prioritized by the League and bring manufacturing stop or derogation proposals. Key responsibilities: You have the end-to-end understanding of customer requirements for your team and as quality expert you translate Quality and Customer Experience (CX) requirements into Critical to Quality (CTQ) to allow the team to meet customer promises. As a coach and quality expert, you participate to the definition of Done to reach Customer promises. You ensure that risks are identified, shared and actions are done to mitigate them: You Support the Product Owner to capture Customer needs to feed Application & Mission Profile (i.e., Application FMEA ) You Support Design & Industrialization to reach Robustness & Reliability goals (i.e., Design FMEA , Process FMEA , PPEP plan, PQCS , PQCP , Risk Priority Number scoring, Verification & Validation definition) You lead Problems solving (Issue to Prevention) with effective Root Cause Analysis and ensure that corrective and preventive action prioritization in the backlogs. You lead the application of Directives related to E2E Quality Product (ex. DirQ32) In coordination with Chapter Leader, you develop the team accountability for the Excellence of Quality & Customer Experience You are working in an Agile environment and ensure autonomous, empowered & dedicated team on CS&Q key activities. Skills and attributes: Experience in Software development or tests to understand constraints in the embedded environment. Good knowledge of quality methodologies (FMEAs, risks analysis, 8D, 5 Why and root causes analyses) Good knowledge of the Voice of Customer, Persona definition, Customer Journey Mapping methods Customer-oriented mindset Good capacities of leadership and influence Communication capabilities Education Bachelor's degree in software or Electronic Engineering or similar At Schneider Electric, Diversity & Inclusion is at the heart of our organisation, it's an integral part of our history, culture, and identity. We recognise that embracing diversity unlocks innovation and creativity and fosters collaboration. We want our employees to reflect the diversity of our communities and the customers we serve. As a result, our teams are stronger to drive the company's future. "We are proudly participating in the Disability Confident Program offering support to people in the workplace who consider themselves living with a disability." What we offer you: Competitive salary & Bonus Scheme, 28 Days Annual Leave + Public Holidays, Holiday Buy & Sell programme, Pension Scheme, Employee Share Ownership Programme, Various Health & Wellbeing Support Options, Gym Flex, Open Talent Market (internal mobility opportunities + access to mentors & projects globally), Shopping & Dining Discounts, Learning Portal and much more. Apply now: Please submit an online application to be considered for any position with us. You know about us, so let us learn about you! Apply today. Why us? Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive. €25.7bn global revenue (Apply online only)+ employees in 100+ countries 45% of revenue from IoT 5% of revenue devoted for R&D You must submit an online application to be considered for any position with us. This position will be posted until filled It is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.
Apr 17, 2024
Full time
Project Quality Leader Mission : We are seeking an Offer Project Quality Leader to develop the team accountability and, as every team member is responsible for the Excellence of the Customer Experience, Quality, Reliability and Safety activities. Manage the Issue to Prevention actions prioritized by the League and bring manufacturing stop or derogation proposals. Key responsibilities: You have the end-to-end understanding of customer requirements for your team and as quality expert you translate Quality and Customer Experience (CX) requirements into Critical to Quality (CTQ) to allow the team to meet customer promises. As a coach and quality expert, you participate to the definition of Done to reach Customer promises. You ensure that risks are identified, shared and actions are done to mitigate them: You Support the Product Owner to capture Customer needs to feed Application & Mission Profile (i.e., Application FMEA ) You Support Design & Industrialization to reach Robustness & Reliability goals (i.e., Design FMEA , Process FMEA , PPEP plan, PQCS , PQCP , Risk Priority Number scoring, Verification & Validation definition) You lead Problems solving (Issue to Prevention) with effective Root Cause Analysis and ensure that corrective and preventive action prioritization in the backlogs. You lead the application of Directives related to E2E Quality Product (ex. DirQ32) In coordination with Chapter Leader, you develop the team accountability for the Excellence of Quality & Customer Experience You are working in an Agile environment and ensure autonomous, empowered & dedicated team on CS&Q key activities. Skills and attributes: Experience in Software development or tests to understand constraints in the embedded environment. Good knowledge of quality methodologies (FMEAs, risks analysis, 8D, 5 Why and root causes analyses) Good knowledge of the Voice of Customer, Persona definition, Customer Journey Mapping methods Customer-oriented mindset Good capacities of leadership and influence Communication capabilities Education Bachelor's degree in software or Electronic Engineering or similar At Schneider Electric, Diversity & Inclusion is at the heart of our organisation, it's an integral part of our history, culture, and identity. We recognise that embracing diversity unlocks innovation and creativity and fosters collaboration. We want our employees to reflect the diversity of our communities and the customers we serve. As a result, our teams are stronger to drive the company's future. "We are proudly participating in the Disability Confident Program offering support to people in the workplace who consider themselves living with a disability." What we offer you: Competitive salary & Bonus Scheme, 28 Days Annual Leave + Public Holidays, Holiday Buy & Sell programme, Pension Scheme, Employee Share Ownership Programme, Various Health & Wellbeing Support Options, Gym Flex, Open Talent Market (internal mobility opportunities + access to mentors & projects globally), Shopping & Dining Discounts, Learning Portal and much more. Apply now: Please submit an online application to be considered for any position with us. You know about us, so let us learn about you! Apply today. Why us? Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive. €25.7bn global revenue (Apply online only)+ employees in 100+ countries 45% of revenue from IoT 5% of revenue devoted for R&D You must submit an online application to be considered for any position with us. This position will be posted until filled It is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.
Manager, Perimeter Security Testing The Global Information Security (GIS) organization delivers proactive cyber defence for the global Pfizer enterprise. Our mission is to secure all of Pfizer's digital information assets ranging from the manufacturing floor to the core data centres, and out to our patient facing solutions. We achieve this mission through a team of world-class talent that focuses on building strong partnerships to build security into all aspects of our business. Across GIS we utilize top-tier technologies, industry leading best practices, advanced analytics, and the promotion of a cybersecurity ownership culture to drive results for the enterprise. The Manager, Perimeter Security Testing will perform cybersecurity manual and automated vulnerability assessments for business solutions that are externally facing. The assessments will focus on protecting the company information assets using a threat-based approach and recommend risk reduction actions. The manager will work within a team and directly with business technology application and technology teams. The position will report to the Global Information Security, Red Team Manager. At Pfizer, you will find a company as focused on its internal culture as it is on its external reputation. You will have the opportunity to partner with colleagues of diverse backgrounds and abilities, people who contribute to all aspects of what we do-from drug development to marketing, technology to sales, and so much more. Primary responsibilities include: Leverage industry best practices perform manual and automated security testing for web applications, architectures, specialty solutions including internet of things and wearable devices as well as participate in critical asset reviews. Research new security threats, vulnerabilities, and exploit techniques to identify new weaknesses and recommend remediation or mitigation. Ability to perform manual testing for remediation validation and verification of vulnerabilities reported. Create scripting code and methodologies for new testing techniques. Upgrade, maintain, and recommend security process workflows to support perimeter security testing and remediation. Manage assessments performed and deliver results to customers on time, assist customers with recommendations and retest as needed. Develop communications and present to key shareholders for assessments. Responding to new attack surfaces and help implement new requirements as needed. Drive remediation of findings or recommend mitigations to business stakeholders. Transform or adapt remediation tracking workflows and vulnerability risk ratings to prioritize business actions. Ability to work both independently and in a team-oriented, collaborative environment. Partner with global team members to drive secure outcomes based on industry best practices. Partner with the business units on developing remediation tracking deadlines, and deployment of mitigations BASIC QUALIFICATIONS Proven experience in information and cybersecurity BS in Computer Sciences, Information Security, Information Systems, Engineering, Sciences, or related field Experience performing security assessments. Familiar with automation or scripting languages Strong leadership skills with the ability to prioritize and execute with minimal direction or oversight. Ability to interpret log data and draw analytical conclusions. Maintain awareness of industry frameworks and best practices: Threat Modelling, NIST, OWASP, SANS Security Model Maintain awareness of industry trends and emerging technologies including web services, mobile, wearables, isolated architectures, databases security, IoT Understanding of operating systems, network protocols, and applications development Experience with security testing tool, proxies, port scanners, vulnerability scanners, exploit frameworks Proven track record in project planning, execution and delivering results with multiple projects concurrently. Ability to proactively solve complex problems both individually and as part of a team. Demonstrated experience in an agile work environment possessing qualities such as a collaborative mindset, adaptability to change, and a proactive problem-solving approach. Demonstrated commitment to training, self-study and maintaining proficiency in the cyber security domain. Effective oral, written, and interpersonal communications skills are required as well as organizational, planning, and administrative abilities and the ability to coordinate multiple complex projects simultaneously. High level of integrity and strong ethical values Work Location Assignment: Flexible
Apr 17, 2024
Full time
Manager, Perimeter Security Testing The Global Information Security (GIS) organization delivers proactive cyber defence for the global Pfizer enterprise. Our mission is to secure all of Pfizer's digital information assets ranging from the manufacturing floor to the core data centres, and out to our patient facing solutions. We achieve this mission through a team of world-class talent that focuses on building strong partnerships to build security into all aspects of our business. Across GIS we utilize top-tier technologies, industry leading best practices, advanced analytics, and the promotion of a cybersecurity ownership culture to drive results for the enterprise. The Manager, Perimeter Security Testing will perform cybersecurity manual and automated vulnerability assessments for business solutions that are externally facing. The assessments will focus on protecting the company information assets using a threat-based approach and recommend risk reduction actions. The manager will work within a team and directly with business technology application and technology teams. The position will report to the Global Information Security, Red Team Manager. At Pfizer, you will find a company as focused on its internal culture as it is on its external reputation. You will have the opportunity to partner with colleagues of diverse backgrounds and abilities, people who contribute to all aspects of what we do-from drug development to marketing, technology to sales, and so much more. Primary responsibilities include: Leverage industry best practices perform manual and automated security testing for web applications, architectures, specialty solutions including internet of things and wearable devices as well as participate in critical asset reviews. Research new security threats, vulnerabilities, and exploit techniques to identify new weaknesses and recommend remediation or mitigation. Ability to perform manual testing for remediation validation and verification of vulnerabilities reported. Create scripting code and methodologies for new testing techniques. Upgrade, maintain, and recommend security process workflows to support perimeter security testing and remediation. Manage assessments performed and deliver results to customers on time, assist customers with recommendations and retest as needed. Develop communications and present to key shareholders for assessments. Responding to new attack surfaces and help implement new requirements as needed. Drive remediation of findings or recommend mitigations to business stakeholders. Transform or adapt remediation tracking workflows and vulnerability risk ratings to prioritize business actions. Ability to work both independently and in a team-oriented, collaborative environment. Partner with global team members to drive secure outcomes based on industry best practices. Partner with the business units on developing remediation tracking deadlines, and deployment of mitigations BASIC QUALIFICATIONS Proven experience in information and cybersecurity BS in Computer Sciences, Information Security, Information Systems, Engineering, Sciences, or related field Experience performing security assessments. Familiar with automation or scripting languages Strong leadership skills with the ability to prioritize and execute with minimal direction or oversight. Ability to interpret log data and draw analytical conclusions. Maintain awareness of industry frameworks and best practices: Threat Modelling, NIST, OWASP, SANS Security Model Maintain awareness of industry trends and emerging technologies including web services, mobile, wearables, isolated architectures, databases security, IoT Understanding of operating systems, network protocols, and applications development Experience with security testing tool, proxies, port scanners, vulnerability scanners, exploit frameworks Proven track record in project planning, execution and delivering results with multiple projects concurrently. Ability to proactively solve complex problems both individually and as part of a team. Demonstrated experience in an agile work environment possessing qualities such as a collaborative mindset, adaptability to change, and a proactive problem-solving approach. Demonstrated commitment to training, self-study and maintaining proficiency in the cyber security domain. Effective oral, written, and interpersonal communications skills are required as well as organizational, planning, and administrative abilities and the ability to coordinate multiple complex projects simultaneously. High level of integrity and strong ethical values Work Location Assignment: Flexible
Project Engineer - Design - Warehouse Automation / Material Handling £55,000 - £60,000 Nottingham Monday - Friday (Mainly office based with very little travel). I am currently recruiting a Project Engineer with engineering projects experience to work on multiple projects, developing automation solutions for new and existing automated sites. You will take engineering ownership and be responsible for the design and development of various project solutions in collaboration with wider engineering teams. You will be responsible for producing and reviewing various technical documentation including, but not limited to, layout, design calculations and progress reports You will be responsible for managing suppliers, preparing your solutions for rolling out across various projects and providing ongoing support to the design team to resolve any engineering issues as well as documenting feedback for future developments. Duties; Provide technical leadership for each project through all key stages including concept verification, layout and validation, design and procurement 2D Drawings Design work Layout design Manage multiple projects in parallel Create and supervise the creation of detailed engineering drawings Support Implementation with installation expertise, ensuring best practice is followed and understood and product engineering challenges are resolved Review, maintain and communicate related technical documentation Proactively support engineering supply chain with engineering detail, including acceptance testing and order specification Ensure product and process quality is maintained Experience; At least 3-5 years experience with conveyor / MHE automation Project Engineering - demonstrable experience & success in delivering projects on time and within approved budgets with an automation, FMCG or manufacturing environment Working knowledge and experience with conveyors, ASRS systems, tote and pallet conveyors Experience in managing project budgets and applying the appropriate analysis tools in order to make decisions and manage variations from the specification, consult stakeholders as appropriate and gain resolution Excellent technical and practical competence relating to MHE automation and general engineering Experience of projects and products in manufacturing, automotive, airports, FMCG distribution or similar field Aptitude to debate details (both technical and commercial) with both internal and external parties IT literate, proficient with Microsoft Office/Project and comfortable using CAD packages Must have very good negotiation skills with the ability to listen, comprehend, consider and assimilate others points of view with their own beliefs and visions Experience in vendor selection and long-term engagement for the delivery of services and products Appreciation of applicable directives, codes standards etc (eg machinery directive) Technical / Engineering qualification to degree level in a relevant field Application Process: If you have the above skills and wish to be considered for this position or find out more details then please submit your CV. We will endeavour to contact all applicants however if you do not hear from me within two weeks then unfortunately you have been unsuccessful.
Apr 17, 2024
Full time
Project Engineer - Design - Warehouse Automation / Material Handling £55,000 - £60,000 Nottingham Monday - Friday (Mainly office based with very little travel). I am currently recruiting a Project Engineer with engineering projects experience to work on multiple projects, developing automation solutions for new and existing automated sites. You will take engineering ownership and be responsible for the design and development of various project solutions in collaboration with wider engineering teams. You will be responsible for producing and reviewing various technical documentation including, but not limited to, layout, design calculations and progress reports You will be responsible for managing suppliers, preparing your solutions for rolling out across various projects and providing ongoing support to the design team to resolve any engineering issues as well as documenting feedback for future developments. Duties; Provide technical leadership for each project through all key stages including concept verification, layout and validation, design and procurement 2D Drawings Design work Layout design Manage multiple projects in parallel Create and supervise the creation of detailed engineering drawings Support Implementation with installation expertise, ensuring best practice is followed and understood and product engineering challenges are resolved Review, maintain and communicate related technical documentation Proactively support engineering supply chain with engineering detail, including acceptance testing and order specification Ensure product and process quality is maintained Experience; At least 3-5 years experience with conveyor / MHE automation Project Engineering - demonstrable experience & success in delivering projects on time and within approved budgets with an automation, FMCG or manufacturing environment Working knowledge and experience with conveyors, ASRS systems, tote and pallet conveyors Experience in managing project budgets and applying the appropriate analysis tools in order to make decisions and manage variations from the specification, consult stakeholders as appropriate and gain resolution Excellent technical and practical competence relating to MHE automation and general engineering Experience of projects and products in manufacturing, automotive, airports, FMCG distribution or similar field Aptitude to debate details (both technical and commercial) with both internal and external parties IT literate, proficient with Microsoft Office/Project and comfortable using CAD packages Must have very good negotiation skills with the ability to listen, comprehend, consider and assimilate others points of view with their own beliefs and visions Experience in vendor selection and long-term engagement for the delivery of services and products Appreciation of applicable directives, codes standards etc (eg machinery directive) Technical / Engineering qualification to degree level in a relevant field Application Process: If you have the above skills and wish to be considered for this position or find out more details then please submit your CV. We will endeavour to contact all applicants however if you do not hear from me within two weeks then unfortunately you have been unsuccessful.
Cure Talent is delighted to partner with a rapidly growing MedTech Design House based in Glasgow. This innovative company specialises in the design and development of a wide array of Medical Devices, collaborating with providers to create revolutionary solutions. Due to their continued exceptional growth, we are seeking a Principal Design Assurance Engineer to join their dynamic team. The successful candidate will have the opportunity to apply their skills and engineering knowledge in areas such as quality systems, supplier controls, design assurance, test method development and validation, design controls, and regulatory affairs for a wide range of innovative medical device projects. Key day-to-day responsibilities include: Leading key development activities within multidisciplinary device design teams, focusing on user needs, design input, and risk management (ISO 14971). Creating and reviewing design documentation, ensuring its suitability for inclusion in Design History/Technical Files. Contributing expertise to Design Verification/Validation activities, ensuring compliance and efficacy in the product development process. We are looking for the following experience, skills, and qualifications: Bachelor's degree in a relevant scientific or engineering discipline. Proven experience and a thorough understanding of MDR and ISO 13485. Experience working under medical device design controls, with proven knowledge of design verification/validation and design/process FMEAs. Knowledge and demonstrated practice of risk management methodologies as per ISO 14971. If you're seeking an exciting opportunity to be part of a rapidly expanding company at the forefront of health technology innovation, get in touch today!
Apr 16, 2024
Full time
Cure Talent is delighted to partner with a rapidly growing MedTech Design House based in Glasgow. This innovative company specialises in the design and development of a wide array of Medical Devices, collaborating with providers to create revolutionary solutions. Due to their continued exceptional growth, we are seeking a Principal Design Assurance Engineer to join their dynamic team. The successful candidate will have the opportunity to apply their skills and engineering knowledge in areas such as quality systems, supplier controls, design assurance, test method development and validation, design controls, and regulatory affairs for a wide range of innovative medical device projects. Key day-to-day responsibilities include: Leading key development activities within multidisciplinary device design teams, focusing on user needs, design input, and risk management (ISO 14971). Creating and reviewing design documentation, ensuring its suitability for inclusion in Design History/Technical Files. Contributing expertise to Design Verification/Validation activities, ensuring compliance and efficacy in the product development process. We are looking for the following experience, skills, and qualifications: Bachelor's degree in a relevant scientific or engineering discipline. Proven experience and a thorough understanding of MDR and ISO 13485. Experience working under medical device design controls, with proven knowledge of design verification/validation and design/process FMEAs. Knowledge and demonstrated practice of risk management methodologies as per ISO 14971. If you're seeking an exciting opportunity to be part of a rapidly expanding company at the forefront of health technology innovation, get in touch today!