Why Greencore? We're a leading manufacturer of convenience food in the UK and our purpose is to make every day. We're a vibrant, fast-paced leading food manufacturer. Employing around 13,600 colleagues across 16 manufacturing units and 17 distribution depots across the UK. We supply all the UK's food retailers with everything from Sandwiches, soups and sushi to cooking sauces, pickles and ready meals, and in FY23, we generated revenues of £1.9bn. Our vast direct-to-store (DTS) distribution network, comprising of 17 depots nationwide, enables us to make over 10,400 daily deliveries of our own chilled and frozen produce and that of third parties. Here at Leeds we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! What You'll Be Doing Are you a multi-skilled Engineering Team Leader looking for a new technically challenging and varied role? Can you lead and empower a team? We are looking for an Engineering Team Leader; managing a team of fellow Engineers who maintain and improve the performance of all plant and equipment to achieve maximum machine availability targets. As a Team Leader you will: Lead an engineering shift team to create a high performing culture where team members are motivated, engaged, and supported to develop and achieve their potential. Plan and prioritise the shift workload for the engineering team to enable production targets to be achieved by maximising machinery up time Execute the planned preventative maintenance schedule to maximise machinery up time and minimise disruption to production targets Ensure all plant and equipment adhere to all relevant legislation and so that a safe working environment is maintained all times Ensure that the permit to work is in place and adhered to so that contractors and colleagues work safely at all times Ensure the shift engineering team adhere to good manufacturing practices (GMP) ensuring compliance with manufacturing unit food safety requirements Lead the engineering team to create a high performing culture; including setting team/individual expectations, leading by example, encouraging and supporting to achieve their potential and ensuring policies are upheld Ensure the accurate and timely documentation of shift activities & performance, escalation of relevant events as required, real time use of CMMS, completion of relevant reports, root cause analysis studies and active contribution to daily meetings Shift Pattern: 4 on 4 off days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. You will: Hold a mechanical or electrical engineering qualification gained through a time served apprenticeship or study, ideally at NVQ L3 Knowledge of permit systems, risk assessments and method statements Supervisory experience Have practical experience of fault finding on various types of manufacturing machinery Display PLC Awareness and fault finding capabilities Understand how to maintain Engineering Systems within a manufacturing environment Food or wider FMCG Manufacturing Experience is desirable If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Mar 29, 2024
Full time
Why Greencore? We're a leading manufacturer of convenience food in the UK and our purpose is to make every day. We're a vibrant, fast-paced leading food manufacturer. Employing around 13,600 colleagues across 16 manufacturing units and 17 distribution depots across the UK. We supply all the UK's food retailers with everything from Sandwiches, soups and sushi to cooking sauces, pickles and ready meals, and in FY23, we generated revenues of £1.9bn. Our vast direct-to-store (DTS) distribution network, comprising of 17 depots nationwide, enables us to make over 10,400 daily deliveries of our own chilled and frozen produce and that of third parties. Here at Leeds we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! What You'll Be Doing Are you a multi-skilled Engineering Team Leader looking for a new technically challenging and varied role? Can you lead and empower a team? We are looking for an Engineering Team Leader; managing a team of fellow Engineers who maintain and improve the performance of all plant and equipment to achieve maximum machine availability targets. As a Team Leader you will: Lead an engineering shift team to create a high performing culture where team members are motivated, engaged, and supported to develop and achieve their potential. Plan and prioritise the shift workload for the engineering team to enable production targets to be achieved by maximising machinery up time Execute the planned preventative maintenance schedule to maximise machinery up time and minimise disruption to production targets Ensure all plant and equipment adhere to all relevant legislation and so that a safe working environment is maintained all times Ensure that the permit to work is in place and adhered to so that contractors and colleagues work safely at all times Ensure the shift engineering team adhere to good manufacturing practices (GMP) ensuring compliance with manufacturing unit food safety requirements Lead the engineering team to create a high performing culture; including setting team/individual expectations, leading by example, encouraging and supporting to achieve their potential and ensuring policies are upheld Ensure the accurate and timely documentation of shift activities & performance, escalation of relevant events as required, real time use of CMMS, completion of relevant reports, root cause analysis studies and active contribution to daily meetings Shift Pattern: 4 on 4 off days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. You will: Hold a mechanical or electrical engineering qualification gained through a time served apprenticeship or study, ideally at NVQ L3 Knowledge of permit systems, risk assessments and method statements Supervisory experience Have practical experience of fault finding on various types of manufacturing machinery Display PLC Awareness and fault finding capabilities Understand how to maintain Engineering Systems within a manufacturing environment Food or wider FMCG Manufacturing Experience is desirable If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
My client based in Bristol Clevedon is currently in need of a Production Operative due to expansion OVERALL PURPOSE Reporting to the Team Supervisor the ideal candidate will have the ability to lay up using advanced preparer materials and / or assemble a variety of Composite structures and components using adhesives and mechanical fasteners. PRINCIPLE ACCOUNTABILITIES Cleaning and preparing mould tools for curing, Cutting and laying up materials in mould tools, Loading and operating industrial curing ovens / autoclaves / presses, Core filling pre and post curing, Assembling components using adhesives and mechanical fasteners, Hand and machine finishing of components and assemblies e.g. linishing and countersinking, Responsible for ensuring that a high standard of housekeeping is maintained, To support team members with other tasks / training as and when necessary, To help to create and maintain a safe working environment and observe the published Health and Safety Procedures, To carry out any other tasks where reasonable and relevant as and when required. This is not an exhaustive list. QUALIFICATIONS GCSE (or equivalent) English and Maths grade C or above Apprenticeship served EXPERIENCE/ SKILLS Previous experience in the aerospace industry Previous experience within a manufacturing environment (engineering, boatbuilding, woodworking, mechanical or similar) Composite layup / laminating experience Demonstrable practical skills Ability to read engineering drawings Competency using hand tools Competency using toolroom machinery such as pillar drills and bandsaws Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines The hourly rate for this role is paying £12.50 - £14.50
Mar 29, 2024
Full time
My client based in Bristol Clevedon is currently in need of a Production Operative due to expansion OVERALL PURPOSE Reporting to the Team Supervisor the ideal candidate will have the ability to lay up using advanced preparer materials and / or assemble a variety of Composite structures and components using adhesives and mechanical fasteners. PRINCIPLE ACCOUNTABILITIES Cleaning and preparing mould tools for curing, Cutting and laying up materials in mould tools, Loading and operating industrial curing ovens / autoclaves / presses, Core filling pre and post curing, Assembling components using adhesives and mechanical fasteners, Hand and machine finishing of components and assemblies e.g. linishing and countersinking, Responsible for ensuring that a high standard of housekeeping is maintained, To support team members with other tasks / training as and when necessary, To help to create and maintain a safe working environment and observe the published Health and Safety Procedures, To carry out any other tasks where reasonable and relevant as and when required. This is not an exhaustive list. QUALIFICATIONS GCSE (or equivalent) English and Maths grade C or above Apprenticeship served EXPERIENCE/ SKILLS Previous experience in the aerospace industry Previous experience within a manufacturing environment (engineering, boatbuilding, woodworking, mechanical or similar) Composite layup / laminating experience Demonstrable practical skills Ability to read engineering drawings Competency using hand tools Competency using toolroom machinery such as pillar drills and bandsaws Ability to work independently while collaborating in a team environment Ability to work under pressure and to deadlines The hourly rate for this role is paying £12.50 - £14.50
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Mar 29, 2024
Full time
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Mar 29, 2024
Full time
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Mobile Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Mar 29, 2024
Full time
Company Profile Working Hours are (Apply online only) The Role as requires participation in the out of hours on call rota, for which a 100 standby payment will be made and a pattern of 1:4 weekends. (Apply online only); Working days will be any 5 in 7 days, including 1 in 2 weekends. 40 hours per week. Non working days to be agreed locally with local supervisor. Where scheduled out of hours PPMs are delivered, there may, on occasion, be a requirement to move to an evening shift (within the number of weekly working hours) to support the delivery or supervision of these tasks. Holiday entitlement will be a total of 33 days which includes bank holidays (rather than a holiday entitlement plus bank holidays). 25 days annual leave + Bank holidays = 33 days leave. Bank Holidays will need to be booked as annual leave. CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Mobile Multi Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team. The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services. Role Summary: Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM's Fault finding on all types of Machinery Support others in the department in relation to Health and Safety Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately Completion of the required documentation as specified with the requirements of all rules and legislation Work on Three Phase Systems with Voltages up to 440V Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently. Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given Perform adhoc duties as and when required Experience Required: A Recognised or Time Served Apprenticeship Strong proven experience in manufacturing maintenance Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition Mechanical Competences / Qualifications to an acceptable standard to City and Guild's Mechanical Good multi skilled ability Experience working on 3 phase motors, drives and inverters Hydraulic / Pneumatic Experience Ability to fault find PLC Diagnostics / Repair Competencies NVQ Qualifications to Level 2, Electrical and Mechanical Ability to supervise contractors Able to write Risk and Method Statements Able to understand and write Permits Desirable Working at Height Qualification IPAF AP Qualifications Experience of Heavy Engineering
Join the Olympic Gymnasium Services team as a Field Service Engineer in Watford and Home Counties. Enjoy a salary of £32k - £35k plus benefits like a pension, company vehicle, and overtime Be part of a highly skilled and dedicated team, ensuring safety and maintenance of sports equipment in schools and leisure centres. Don't miss this exciting career opportunity. Immediate start is available so apply now! Field Service EngineerWatford, Home Counties (ideal candidate based around Hemel Hempstead, Watford, Amersham, St Albans or close to M40) Full time, permanent £32,000 - £35,000 depending on experience (+ Pension, Company Vehicle, and Overtime) Immediate start available Please Note: Applicants must be authorised to work in the UK What do we do? Olympic Gymnasium Services carry out safety inspections, maintenance, repairs, installation, and refurbishment of PE, sports and playground equipment in school gyms, playgrounds and sports halls. Benefits of a Career with Olympic Gymnasium Services: As well as an exciting career opportunity and generous salary of £32k - £35k, we can offer you the following perks and benefits: Company pension Company vehicle Overtime pay Holiday entitlement of 28 days, including statutory holidays Company closure between Christmas and New Year About the Role: We are a small team, looking for someone who enjoys varied and challenging work, wants to be part of a friendly team, is enthusiastic to learn, has excellent customer service skills and can plan, organise and take responsibility for all aspects of a job whether working alone or as part of a team. This is an excellent opportunity for a very varied and interesting career and with scope for a supervisory role for an individual with the right skills and approach. Working hours: You will be required to stay away occasional weekdays to minimise travel and work very occasional weekends at busy periods in school holidays and half terms. Responsibilities: Travel to customer sites e.g. schools, colleges, military bases and leisure centres to inspect, maintain and report on, and repair all gymnasium, sports hall, playground and exercise equipment Complete regular maintenance tasks and detailed inspection reports and quotes daily and identify repair options and source non-standard parts for repairs Collaborate with other colleagues to complete projects efficiently Liaise with and assist customers as the face of the Company to identify best outcomes for customers Accountable for obtaining new parts or equipment for repairs or installations Repair, refurbish and court mark sports floors Maintain tools and PPE and work with colleagues to implement and enhance all Health and Safety requirements Requirements: Previous Experience: Practical experience in a similar or general maintenance/fitting/installation role Experience using hand tools and ability to work at heights on a tower are essential Experience using floor sanders/buffers and arc welding would be useful Skills: Excellent customer service skills and attention to detail Able to communicate effectively both verbally and in writing Good problem-solving skills, ability to identify repair options rather than replacement of equipment and have a "can do" attitude to completing jobs Able to work alone or as an efficient member of a team Qualifications: Have a clean and valid driving licence and DBS check and have the necessary permits to work in the UK A PASMA certificate would be helpful but not essential as you would be trained on the relevant course Please note: You will also Ideally be located near the M1/M40/M4 corridors up to 80 miles from London. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to tailor your application and provide a cover letter or any supporting documents. Due to the nature of the role, the company will not be providing a sponsorship or relocation package for this position, therefore, candidates will only be considered if they are eligible to both live and work in the UK without sponsorship. Other suitable skills and experience include Field Engineer, Service Engineer, Field Service Engineer, Multi Skilled Engineer, Mechanical Engineer, Maintenance Engineer, Mobile Technician, Fault Repair Engineer, Maintenance Technician, Mobile Engineer Controller, Engineering, Fitter, Installation, Installer, General Maintenance.
Mar 29, 2024
Full time
Join the Olympic Gymnasium Services team as a Field Service Engineer in Watford and Home Counties. Enjoy a salary of £32k - £35k plus benefits like a pension, company vehicle, and overtime Be part of a highly skilled and dedicated team, ensuring safety and maintenance of sports equipment in schools and leisure centres. Don't miss this exciting career opportunity. Immediate start is available so apply now! Field Service EngineerWatford, Home Counties (ideal candidate based around Hemel Hempstead, Watford, Amersham, St Albans or close to M40) Full time, permanent £32,000 - £35,000 depending on experience (+ Pension, Company Vehicle, and Overtime) Immediate start available Please Note: Applicants must be authorised to work in the UK What do we do? Olympic Gymnasium Services carry out safety inspections, maintenance, repairs, installation, and refurbishment of PE, sports and playground equipment in school gyms, playgrounds and sports halls. Benefits of a Career with Olympic Gymnasium Services: As well as an exciting career opportunity and generous salary of £32k - £35k, we can offer you the following perks and benefits: Company pension Company vehicle Overtime pay Holiday entitlement of 28 days, including statutory holidays Company closure between Christmas and New Year About the Role: We are a small team, looking for someone who enjoys varied and challenging work, wants to be part of a friendly team, is enthusiastic to learn, has excellent customer service skills and can plan, organise and take responsibility for all aspects of a job whether working alone or as part of a team. This is an excellent opportunity for a very varied and interesting career and with scope for a supervisory role for an individual with the right skills and approach. Working hours: You will be required to stay away occasional weekdays to minimise travel and work very occasional weekends at busy periods in school holidays and half terms. Responsibilities: Travel to customer sites e.g. schools, colleges, military bases and leisure centres to inspect, maintain and report on, and repair all gymnasium, sports hall, playground and exercise equipment Complete regular maintenance tasks and detailed inspection reports and quotes daily and identify repair options and source non-standard parts for repairs Collaborate with other colleagues to complete projects efficiently Liaise with and assist customers as the face of the Company to identify best outcomes for customers Accountable for obtaining new parts or equipment for repairs or installations Repair, refurbish and court mark sports floors Maintain tools and PPE and work with colleagues to implement and enhance all Health and Safety requirements Requirements: Previous Experience: Practical experience in a similar or general maintenance/fitting/installation role Experience using hand tools and ability to work at heights on a tower are essential Experience using floor sanders/buffers and arc welding would be useful Skills: Excellent customer service skills and attention to detail Able to communicate effectively both verbally and in writing Good problem-solving skills, ability to identify repair options rather than replacement of equipment and have a "can do" attitude to completing jobs Able to work alone or as an efficient member of a team Qualifications: Have a clean and valid driving licence and DBS check and have the necessary permits to work in the UK A PASMA certificate would be helpful but not essential as you would be trained on the relevant course Please note: You will also Ideally be located near the M1/M40/M4 corridors up to 80 miles from London. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to tailor your application and provide a cover letter or any supporting documents. Due to the nature of the role, the company will not be providing a sponsorship or relocation package for this position, therefore, candidates will only be considered if they are eligible to both live and work in the UK without sponsorship. Other suitable skills and experience include Field Engineer, Service Engineer, Field Service Engineer, Multi Skilled Engineer, Mechanical Engineer, Maintenance Engineer, Mobile Technician, Fault Repair Engineer, Maintenance Technician, Mobile Engineer Controller, Engineering, Fitter, Installation, Installer, General Maintenance.
AWE is currently recruiting for Maintenance Team Leaders (electrical or mechanical) to provide leadership and supervision of asset maintenance delivery craft and support team(s). You will be responsible for the delivery of asset maintenance to ensure plant is reliable and available to meet the corporate, functional and Tech Centre programme, whilst ensuring it's delivered in compliance with legislation, licence conditions, corporate and engineering process and standards Location - Reading area Package - £33,850 - £46,000 (depending on your suitability and level of experience) Closing Date: 31st January 2023 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you need to be considered? An Engineering Apprenticeship with a relevant, recognised qualification ONC, ND or NVQ level 3 Strong practical experience of plant maintenance Proven fault-finding skills PC literate Supervisory, leadership and performance management skills Accredited Risk Assessor Conversant in Health and Safety legislations Practical experience of plant maintenance AMS & maintenance systems/procedures Excellent verbal and written communication skills Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Mar 28, 2024
Full time
AWE is currently recruiting for Maintenance Team Leaders (electrical or mechanical) to provide leadership and supervision of asset maintenance delivery craft and support team(s). You will be responsible for the delivery of asset maintenance to ensure plant is reliable and available to meet the corporate, functional and Tech Centre programme, whilst ensuring it's delivered in compliance with legislation, licence conditions, corporate and engineering process and standards Location - Reading area Package - £33,850 - £46,000 (depending on your suitability and level of experience) Closing Date: 31st January 2023 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you need to be considered? An Engineering Apprenticeship with a relevant, recognised qualification ONC, ND or NVQ level 3 Strong practical experience of plant maintenance Proven fault-finding skills PC literate Supervisory, leadership and performance management skills Accredited Risk Assessor Conversant in Health and Safety legislations Practical experience of plant maintenance AMS & maintenance systems/procedures Excellent verbal and written communication skills Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Job Title: 360 / Shovel Plant Operator - Nights Location: Ridham, Sittingbourne, Kent Salary: £14.00 per hour (dependant on experience) (with £1 top up for working nights) plus monthly KPI bonus Job type: Permanent, Full-time (55 hours per week on a rota basis Monday - Sunday) Countrystyle is a dynamic, privately owned resource management and waste recycling business. With a track record of spotting opportunities, understanding the market and driving innovative solutions, we deliver a reliable service which reduces the impact on the environment of our clients' waste, whilst creating cost-effective and reliable waste management outcomes which encourage a greener business acumen. Main job functions To operate Fixed and Mobile Plant to process recyclable materials to ensure reduction of waste to landfill at all times. Note: in addition to these functions, employees are required to carry out such other duties as may reasonably be required. Main duties Operate appropriate machinery and plant, as required, to maintain the safe and efficient operation of the site at all times. Ensure that plant and machinery is maintained to required standards, including daily & weekly checks, refuelling, lubrication and greasing, and that defects and breakdowns are promptly recorded and reported. Maintain a safe working environment throughout your activities, including keeping working area tidy and access to walkways and emergency exits clear. Ensure appropriate safety equipment and PPE is used at all times. Checking of incoming loads, ensuring compliance with site license and permitted waste types. Immediately report: any contamination or non-conforming wastes delivered to site; accidents, incidents, and near misses; environmental hazards; health & safety breaches to the Supervisor or appropriate Manager. Undertake any training necessary to perform other tasks including the operation of other plant and equipment and/or supervisory duties. Complete Manual Handling activities to assist in waste management activities. Assist other operatives upon request and when authorised by your Supervisor. Carry out other operational duties where necessary for business continuity. Staff have a duty to take care of their own health and safety and that of others who may be affected by their actions at work. Staff must co-operate, report unsafe conditions and comply with the company management systems and safe systems of work as well as co-workers to help everyone meet their legal requirements. The above list is not exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope and grading of the post and training/abilities of the post holder. Job descriptions are regularly reviewed to ensure they are an accurate representation of the post. Person specification Skills Essential: Good Communication Ability to operate and control equipment Time and Priority Management Ability to work in a fast paced, busy environment Desirable: Problem Solving Experience Essential: Experience with Shredders, Shovels, wheeled and tracked 360's, telehandler, clamp trucks, scissor lift/ cherry picker Desirable: Experience in the Waste Industry Qualifications Essential: Tickets for mobile and/or fixed plant. Competencies Essential: Pay attention to detail Ability to work alone or in a team Positive Attitude Desirable: Ability to plan own work Benefits: Company Pension Company events On site parking Cycle to work scheme Wellness programme Investment in career development 28 days holiday including bank holidays Bank Holiday working bonus Employee Assistance Programme Please click on the APPLY button to send your CV and Cover Letter for this role. Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK Candidates with the relevant experience or job title of: Machine Operator, Manufacturing Operative, Manufacturing Engineer, Junior Production Operative, Production Technician, Junior Service Engineer, Graduate Mechanical Engineer, Mechanical Technician, Junior Electrical Technician, Trainee Repair Engineer, Mechanical Engineer, Machine Operator, Machine Technician, Machine Operative may also be considered for this role.
Mar 28, 2024
Full time
Job Title: 360 / Shovel Plant Operator - Nights Location: Ridham, Sittingbourne, Kent Salary: £14.00 per hour (dependant on experience) (with £1 top up for working nights) plus monthly KPI bonus Job type: Permanent, Full-time (55 hours per week on a rota basis Monday - Sunday) Countrystyle is a dynamic, privately owned resource management and waste recycling business. With a track record of spotting opportunities, understanding the market and driving innovative solutions, we deliver a reliable service which reduces the impact on the environment of our clients' waste, whilst creating cost-effective and reliable waste management outcomes which encourage a greener business acumen. Main job functions To operate Fixed and Mobile Plant to process recyclable materials to ensure reduction of waste to landfill at all times. Note: in addition to these functions, employees are required to carry out such other duties as may reasonably be required. Main duties Operate appropriate machinery and plant, as required, to maintain the safe and efficient operation of the site at all times. Ensure that plant and machinery is maintained to required standards, including daily & weekly checks, refuelling, lubrication and greasing, and that defects and breakdowns are promptly recorded and reported. Maintain a safe working environment throughout your activities, including keeping working area tidy and access to walkways and emergency exits clear. Ensure appropriate safety equipment and PPE is used at all times. Checking of incoming loads, ensuring compliance with site license and permitted waste types. Immediately report: any contamination or non-conforming wastes delivered to site; accidents, incidents, and near misses; environmental hazards; health & safety breaches to the Supervisor or appropriate Manager. Undertake any training necessary to perform other tasks including the operation of other plant and equipment and/or supervisory duties. Complete Manual Handling activities to assist in waste management activities. Assist other operatives upon request and when authorised by your Supervisor. Carry out other operational duties where necessary for business continuity. Staff have a duty to take care of their own health and safety and that of others who may be affected by their actions at work. Staff must co-operate, report unsafe conditions and comply with the company management systems and safe systems of work as well as co-workers to help everyone meet their legal requirements. The above list is not exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope and grading of the post and training/abilities of the post holder. Job descriptions are regularly reviewed to ensure they are an accurate representation of the post. Person specification Skills Essential: Good Communication Ability to operate and control equipment Time and Priority Management Ability to work in a fast paced, busy environment Desirable: Problem Solving Experience Essential: Experience with Shredders, Shovels, wheeled and tracked 360's, telehandler, clamp trucks, scissor lift/ cherry picker Desirable: Experience in the Waste Industry Qualifications Essential: Tickets for mobile and/or fixed plant. Competencies Essential: Pay attention to detail Ability to work alone or in a team Positive Attitude Desirable: Ability to plan own work Benefits: Company Pension Company events On site parking Cycle to work scheme Wellness programme Investment in career development 28 days holiday including bank holidays Bank Holiday working bonus Employee Assistance Programme Please click on the APPLY button to send your CV and Cover Letter for this role. Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK Candidates with the relevant experience or job title of: Machine Operator, Manufacturing Operative, Manufacturing Engineer, Junior Production Operative, Production Technician, Junior Service Engineer, Graduate Mechanical Engineer, Mechanical Technician, Junior Electrical Technician, Trainee Repair Engineer, Mechanical Engineer, Machine Operator, Machine Technician, Machine Operative may also be considered for this role.
Before applying can you please ensure you have fully read and understand the job requirements and have the relevant skills set, and qualifications for this role. You will also need to be available for a face to face interview potentially within 3 to 5 days. Position Overview The post holder will work as part of a flexible team with continuing responsibility for the provision of a comprehensive, high quality property maintenance service to all facilities within the designated region. Each post holder will have a designated core skill (Electrician, Fabric, Mechanical, Gas or Air Con) and will be expected to lead in this area, but will also be expected to undertake any property maintenance work within the post holders range of competence. Key Duties & Responsibilities To ensure that the Facilities are maintained to the levels specified in the contractual agreement between FESFM and our clients To undertake planned, responsive and cyclical maintenance work either independently under the supervision of the Maintenance Supervisor To undertake maintenance duties in such a manner as to support the objectives of the client and FESFM To ensure the safe operation of all plant, equipment and tools To operate at all times with safe working practices with due regard to Health and Safety Regulations, COSHH, Control of Infection, Waste Disposal etc in accordance with legislative requirements and policies and procedures of FESFM. To complete asset histories, maintenance records and helpdesk reports, informing the Operation Managers of any follow up action that may be required To take part in an On-Call rota providing 24hr, 365 day cover to the Facilities. Currently 1 in 13 To report all accidents and incidents as appropriate To provide support and assistance to other FESFM personnel on site in the delivery of contracted services throughout our client portfolio. Qualifications Gas C&G/NVQ Level 2/3 Gas Maintenance ACS COCN1 Core Commercial, CIGA1 & CDGA1 Boilers Additional TPCP1 Tightness testing, CORT1 Overhead heaters, Domestic - CCN1 CENWAT, CKR1, LPG Other gas tickets will be considered Person Specification - Attributes Excellent communication skills both written & verbal Curious investigative nature Ability to solve problems Strong customer facing skills Proactive and flexible team player. Ability to react well under pressure Attention to Detail in work required inclusing service sheets Basic computer literate - Use of PDA essential Ability to prioritise. Good time keeping Over all positive temprament
Mar 28, 2024
Full time
Before applying can you please ensure you have fully read and understand the job requirements and have the relevant skills set, and qualifications for this role. You will also need to be available for a face to face interview potentially within 3 to 5 days. Position Overview The post holder will work as part of a flexible team with continuing responsibility for the provision of a comprehensive, high quality property maintenance service to all facilities within the designated region. Each post holder will have a designated core skill (Electrician, Fabric, Mechanical, Gas or Air Con) and will be expected to lead in this area, but will also be expected to undertake any property maintenance work within the post holders range of competence. Key Duties & Responsibilities To ensure that the Facilities are maintained to the levels specified in the contractual agreement between FESFM and our clients To undertake planned, responsive and cyclical maintenance work either independently under the supervision of the Maintenance Supervisor To undertake maintenance duties in such a manner as to support the objectives of the client and FESFM To ensure the safe operation of all plant, equipment and tools To operate at all times with safe working practices with due regard to Health and Safety Regulations, COSHH, Control of Infection, Waste Disposal etc in accordance with legislative requirements and policies and procedures of FESFM. To complete asset histories, maintenance records and helpdesk reports, informing the Operation Managers of any follow up action that may be required To take part in an On-Call rota providing 24hr, 365 day cover to the Facilities. Currently 1 in 13 To report all accidents and incidents as appropriate To provide support and assistance to other FESFM personnel on site in the delivery of contracted services throughout our client portfolio. Qualifications Gas C&G/NVQ Level 2/3 Gas Maintenance ACS COCN1 Core Commercial, CIGA1 & CDGA1 Boilers Additional TPCP1 Tightness testing, CORT1 Overhead heaters, Domestic - CCN1 CENWAT, CKR1, LPG Other gas tickets will be considered Person Specification - Attributes Excellent communication skills both written & verbal Curious investigative nature Ability to solve problems Strong customer facing skills Proactive and flexible team player. Ability to react well under pressure Attention to Detail in work required inclusing service sheets Basic computer literate - Use of PDA essential Ability to prioritise. Good time keeping Over all positive temprament
An experienced and qualified Mechanical Fitter / Supervisor with experience in running installation / service teams on-site is needed to join our team at Rhino Site Systems, a leading door installation and servicing company based in Port Talbot on a full-time basis. This role is National, so the relevant candidate will be working away from home for a large percentage of the time, which could include the odd weekend. This includes travelling to the site, depending on the site location. Our Depots are currently at Port Talbot, South Wales and Bamber Bridges, Preston, Lancashire, so the candidates must live within a commutable distance as there is no dedicated vehicle for this position. This is an excellent opportunity to progress your career with a well-established company! About Us At Rhino Site Systems, we provide premium levels of after-sales and installation services to clients in a range of industries. We've been installing and servicing doors for over 30 years, and due to our consistently high standards of work and customer service, we've built up a first-class reputation across sectors including nuclear, defence and critical national infrastructure. About the Role You will work as a Site team member to provide a combination of installation, repairs, and servicing of various types of doors, but mainly Rhino Doors, including all associated hardware and components. You will be a part of the Servicing and Installation department and will report directly to the Managing Director. Much of our work requires the candidate to undergo a Security clearance, which will include background checks, references for the previous 3 years of employment, residential checks, medical and complete random Drugs and Alcohol checks. A clean driving licence is also required. Key Responsibilities: Install, service and maintain the Rhino Group range of doors, which can be NPSA (CPNI) rated. The range includes Sliding-folding, bi-fold doors, side-hinged doors and fire doors. All doors can be either mechanical or electrically operated Provide an innovative and technically aware approach to problem-solving Comply with all Health & Safety requirements. Lead an on-site team of fitters to ensure the project is completed within the allocated time and to the high standards required Ensure that all HSE and company paperwork is completed and returned to the office after the project has been completed Ensure appropriate audits and checks are carried out on Rhino equipment in line with relevant standards Receive and put into action all written and verbal instructions as required Train and supervise all team members to ensure they adhere to all safety documentation Required Experience: Qualification: IPAF, PASMA (Company will pay for these for the right candidate, but costs will have to be reimbursed should they leave within one year) Candidates must be able to demonstrate that they have experience in running Installation/service teams on-site and have SSSTS Card as a minimum All Electricians Must be fully qualified up to 18th Edition as a minimum All Engineers will be required to have CSCS Cards as a minimum, but all Supervisors will require SSSTS cards. (Company will pay for the upgrade for the right candidate) The ability to read manufacturing or electrical drawings would also be essential Sounds interesting? Click the APPLY button to send your CV for immediate consideration. Candidates with previous experience or job titles, including; Door Engineer, Installation Technician, Maintenance Engineer, Installation Engineer, Maintenance Technician, Door Technician, Automated Door Installer, Automated Door Installation Engineer, and Door Fitter may also be considered.
Mar 28, 2024
Full time
An experienced and qualified Mechanical Fitter / Supervisor with experience in running installation / service teams on-site is needed to join our team at Rhino Site Systems, a leading door installation and servicing company based in Port Talbot on a full-time basis. This role is National, so the relevant candidate will be working away from home for a large percentage of the time, which could include the odd weekend. This includes travelling to the site, depending on the site location. Our Depots are currently at Port Talbot, South Wales and Bamber Bridges, Preston, Lancashire, so the candidates must live within a commutable distance as there is no dedicated vehicle for this position. This is an excellent opportunity to progress your career with a well-established company! About Us At Rhino Site Systems, we provide premium levels of after-sales and installation services to clients in a range of industries. We've been installing and servicing doors for over 30 years, and due to our consistently high standards of work and customer service, we've built up a first-class reputation across sectors including nuclear, defence and critical national infrastructure. About the Role You will work as a Site team member to provide a combination of installation, repairs, and servicing of various types of doors, but mainly Rhino Doors, including all associated hardware and components. You will be a part of the Servicing and Installation department and will report directly to the Managing Director. Much of our work requires the candidate to undergo a Security clearance, which will include background checks, references for the previous 3 years of employment, residential checks, medical and complete random Drugs and Alcohol checks. A clean driving licence is also required. Key Responsibilities: Install, service and maintain the Rhino Group range of doors, which can be NPSA (CPNI) rated. The range includes Sliding-folding, bi-fold doors, side-hinged doors and fire doors. All doors can be either mechanical or electrically operated Provide an innovative and technically aware approach to problem-solving Comply with all Health & Safety requirements. Lead an on-site team of fitters to ensure the project is completed within the allocated time and to the high standards required Ensure that all HSE and company paperwork is completed and returned to the office after the project has been completed Ensure appropriate audits and checks are carried out on Rhino equipment in line with relevant standards Receive and put into action all written and verbal instructions as required Train and supervise all team members to ensure they adhere to all safety documentation Required Experience: Qualification: IPAF, PASMA (Company will pay for these for the right candidate, but costs will have to be reimbursed should they leave within one year) Candidates must be able to demonstrate that they have experience in running Installation/service teams on-site and have SSSTS Card as a minimum All Electricians Must be fully qualified up to 18th Edition as a minimum All Engineers will be required to have CSCS Cards as a minimum, but all Supervisors will require SSSTS cards. (Company will pay for the upgrade for the right candidate) The ability to read manufacturing or electrical drawings would also be essential Sounds interesting? Click the APPLY button to send your CV for immediate consideration. Candidates with previous experience or job titles, including; Door Engineer, Installation Technician, Maintenance Engineer, Installation Engineer, Maintenance Technician, Door Technician, Automated Door Installer, Automated Door Installation Engineer, and Door Fitter may also be considered.
Senior Maintenance Engineer - Days - County Down - Salary £45000 - £50000 (DoE) Senior Maintenance Engineer - NO nights OR weekends - County Down - Salary £45000 - £50000 (DoE) Your New Company Our client proudly boasts more than 40 years of experience and their business is anchored on its core values of respect, responsibility, quality, efficiency and commitment. Your New Role Whilst working as a Senior Maintenance Engineer (multi-skilled w/ electrical bias) you will be responsible for all equipment, processes and controls within the plant. You will be expected to support your team and production colleagues in ensuring downtime is minimised through preventative action and prioritising break-downs. You will advise on technical issues, resolve and share best practice to reduce recurrence. Working in collaboration with your engineering and production colleagues, you will strive to continually improve the maintenance service. Whilst on shift your key duties and responsibilities will include, but are not limited to: Monitoring equipment and plant performance and following maintenance plans, carry out planned routine and non-routine maintenance tasks which will ensure plant performance is maintained at a high level • Provide reactive maintenance support to the production operation to BRC standards • Perform Engineering corrective actions to support the Production Team in ensuring that safe product is produced in line with legislation and Food Quality standards • Contribute to effective handover by relaying all information on the day's activity to the next shift • Maintain communication with operators in all departments to ensure any potential maintenance issues are highlighted and addressed at the earliest opportunity • Ensure appropriate "hand-back" procedures are followed both prior to and immediately following maintenance work that is carried out on any operations equipment where there is the potential for product contamination. During equipment inspection or following maintenance work, report any conditions which may adversely impact on finished product quality • Actively identify and implement plans to eliminate unnecessary losses such as cost, waste, and inefficiencies • Assist NPD and Production Team in setting up for new products and processes • Maintain adequate spares stock and re-order parts as required • Negotiate and agree service contract terms & conditions for key production equipment • Agree Service Engineer call intervals for non - contractual equipment & make all necessary arrangements for planned visits • Liaise with Evening Shift Engineer to agree priorities, actions required, etc. • Liaise with all subcontractors on site to ensure all work completed safely and to required standards. Manage and undertake the maintenance of all site fixtures & fittings to include electrical, plumbing & domestic appliances. Co-ordinate site repairs to Insurance requirements • Carry out regular water sampling tests on cooling towers, maintaining records as required • Ensure adequate maintenance of all gas appliances and fire equipment • Carry out repairs using fabrication equipment • Ensure refrigerated vehicle fridge units are working correctly & arrange service and repairs • Champion a safe working culture and ensure compliance with all health and safety policies / procedures and safe systems of work • Maintain focus on workplace safety, ensuring all activities are carried out in accordance with safe working procedures, control measures identified via risk assessment and COSHH assessment, etc. • Observe, act and immediately report any issues that may pose a threat to a safe working environment • Ensure that the circumstances of any accidents or incidents are recorded in detail, reported via specified methods and that any supporting documentation is completed promptly, including any statutory returns. What You'll Need To Succeed In order to be considered for this role you will need to be able to demonstrate the following skills, qualifications and experience. Job Requirements A level of agility is required to permit access to all areas of plant and equipment • Ability to work at heights and in confined spaces. Qualifications and Training (essential) NVQ Level 3 or Time Served Electrical or Mechanical • Demonstrate competent numeracy and literacy skills • Competent knowledge of MS Office (Word and Excel). (desirable) 17th or 18th Edition wiring regulation qualification • HNC/HND (or equivalent) in an Engineering Discipline • Food industry experience • Supervisory experience • Accredited cross trade qualification • English, Maths, Chemistry and/or Physics - GCSE/O Level Grade C or above or equivalent. General Knowledge (essential) Detailed knowledge of manufacturing equipment and/or processes and of the safety requirements in the maintenance and repair of same • Knowledge of safe working practices and what constitutes a safe place of work. (desirable) Knowledge of equipment and processes within the food production environment. Specialist Knowledge (essential) Ability to read mechanical and electrical drawings • Knowledge of equipment to include: Motor overloads / contactors - Variable speed drives - Diagnostics and repair abilities of various electrical and automation systems - PLCs - Electronic circuits, panel building, PLC wiring - Modifying and updating panel drawings - Air compressors/dryers - Pumps and mechanical seals - Pneumatic systems, actuated valves - Mechanical drive systems, gear boxes/conveyors - Hydraulics. (desirable) Knowledge of equipment to include: Refrigeration systems - Vacuum packing equipment • Have experience using a Maintenance ERP system. Experience (essential) Minimum of 10 years recent and relevant work experience within a production or manufacturing environment. (desirable) Relevant experience in chilled/ frozen food manufacturing and production. Skills and Abilities (essential) Good communication skills • Able to maintain accurate records • Able to display initiative and apply problem-solving and planning skills • Able to work unsupervised • Able to work as part of a team • Able to recognise their own skills limitations which can be enhanced through training. Behaviours (essential) Meticulous attention to detail • Committed to quality • Self-motivated and teamwork-oriented • Flexible and adaptable to change • Demonstrate trust and respect for others • Leadership skills. Circumstances (essential) Flexibility required outside core work hours and stay on a job until completion • Overtime maybe required to facilitate colleague holidays and absence when necessary • Flexibility for shift team change may be required to improve team skills balance. What You'll Get In Return For working core hours of Monday - Friday 07:30 - 17:00 you will earn a highly attractive salary of £45000 - £50000 (DoE). Very occasional weekend or call out work may be required but times and rates will be agreed in advance. What You Need To Do Now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Mar 28, 2024
Full time
Senior Maintenance Engineer - Days - County Down - Salary £45000 - £50000 (DoE) Senior Maintenance Engineer - NO nights OR weekends - County Down - Salary £45000 - £50000 (DoE) Your New Company Our client proudly boasts more than 40 years of experience and their business is anchored on its core values of respect, responsibility, quality, efficiency and commitment. Your New Role Whilst working as a Senior Maintenance Engineer (multi-skilled w/ electrical bias) you will be responsible for all equipment, processes and controls within the plant. You will be expected to support your team and production colleagues in ensuring downtime is minimised through preventative action and prioritising break-downs. You will advise on technical issues, resolve and share best practice to reduce recurrence. Working in collaboration with your engineering and production colleagues, you will strive to continually improve the maintenance service. Whilst on shift your key duties and responsibilities will include, but are not limited to: Monitoring equipment and plant performance and following maintenance plans, carry out planned routine and non-routine maintenance tasks which will ensure plant performance is maintained at a high level • Provide reactive maintenance support to the production operation to BRC standards • Perform Engineering corrective actions to support the Production Team in ensuring that safe product is produced in line with legislation and Food Quality standards • Contribute to effective handover by relaying all information on the day's activity to the next shift • Maintain communication with operators in all departments to ensure any potential maintenance issues are highlighted and addressed at the earliest opportunity • Ensure appropriate "hand-back" procedures are followed both prior to and immediately following maintenance work that is carried out on any operations equipment where there is the potential for product contamination. During equipment inspection or following maintenance work, report any conditions which may adversely impact on finished product quality • Actively identify and implement plans to eliminate unnecessary losses such as cost, waste, and inefficiencies • Assist NPD and Production Team in setting up for new products and processes • Maintain adequate spares stock and re-order parts as required • Negotiate and agree service contract terms & conditions for key production equipment • Agree Service Engineer call intervals for non - contractual equipment & make all necessary arrangements for planned visits • Liaise with Evening Shift Engineer to agree priorities, actions required, etc. • Liaise with all subcontractors on site to ensure all work completed safely and to required standards. Manage and undertake the maintenance of all site fixtures & fittings to include electrical, plumbing & domestic appliances. Co-ordinate site repairs to Insurance requirements • Carry out regular water sampling tests on cooling towers, maintaining records as required • Ensure adequate maintenance of all gas appliances and fire equipment • Carry out repairs using fabrication equipment • Ensure refrigerated vehicle fridge units are working correctly & arrange service and repairs • Champion a safe working culture and ensure compliance with all health and safety policies / procedures and safe systems of work • Maintain focus on workplace safety, ensuring all activities are carried out in accordance with safe working procedures, control measures identified via risk assessment and COSHH assessment, etc. • Observe, act and immediately report any issues that may pose a threat to a safe working environment • Ensure that the circumstances of any accidents or incidents are recorded in detail, reported via specified methods and that any supporting documentation is completed promptly, including any statutory returns. What You'll Need To Succeed In order to be considered for this role you will need to be able to demonstrate the following skills, qualifications and experience. Job Requirements A level of agility is required to permit access to all areas of plant and equipment • Ability to work at heights and in confined spaces. Qualifications and Training (essential) NVQ Level 3 or Time Served Electrical or Mechanical • Demonstrate competent numeracy and literacy skills • Competent knowledge of MS Office (Word and Excel). (desirable) 17th or 18th Edition wiring regulation qualification • HNC/HND (or equivalent) in an Engineering Discipline • Food industry experience • Supervisory experience • Accredited cross trade qualification • English, Maths, Chemistry and/or Physics - GCSE/O Level Grade C or above or equivalent. General Knowledge (essential) Detailed knowledge of manufacturing equipment and/or processes and of the safety requirements in the maintenance and repair of same • Knowledge of safe working practices and what constitutes a safe place of work. (desirable) Knowledge of equipment and processes within the food production environment. Specialist Knowledge (essential) Ability to read mechanical and electrical drawings • Knowledge of equipment to include: Motor overloads / contactors - Variable speed drives - Diagnostics and repair abilities of various electrical and automation systems - PLCs - Electronic circuits, panel building, PLC wiring - Modifying and updating panel drawings - Air compressors/dryers - Pumps and mechanical seals - Pneumatic systems, actuated valves - Mechanical drive systems, gear boxes/conveyors - Hydraulics. (desirable) Knowledge of equipment to include: Refrigeration systems - Vacuum packing equipment • Have experience using a Maintenance ERP system. Experience (essential) Minimum of 10 years recent and relevant work experience within a production or manufacturing environment. (desirable) Relevant experience in chilled/ frozen food manufacturing and production. Skills and Abilities (essential) Good communication skills • Able to maintain accurate records • Able to display initiative and apply problem-solving and planning skills • Able to work unsupervised • Able to work as part of a team • Able to recognise their own skills limitations which can be enhanced through training. Behaviours (essential) Meticulous attention to detail • Committed to quality • Self-motivated and teamwork-oriented • Flexible and adaptable to change • Demonstrate trust and respect for others • Leadership skills. Circumstances (essential) Flexibility required outside core work hours and stay on a job until completion • Overtime maybe required to facilitate colleague holidays and absence when necessary • Flexibility for shift team change may be required to improve team skills balance. What You'll Get In Return For working core hours of Monday - Friday 07:30 - 17:00 you will earn a highly attractive salary of £45000 - £50000 (DoE). Very occasional weekend or call out work may be required but times and rates will be agreed in advance. What You Need To Do Now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Job Title: Machine Operator Location: Ridham, Sittingbourne, Kent Salary: £14.00 per hour (dependant on experience) plus monthly KPI bonus Job type: Permanent, Full-time (55 hours per week on a rota basis Monday - Sunday) Countrystyle is a dynamic, privately owned resource management and waste recycling business. With a track record of spotting opportunities, understanding the market and driving innovative solutions, we deliver a reliable service which reduces the impact on the environment of our clients' waste, whilst creating cost-effective and reliable waste management outcomes which encourage a greener business acumen. Main job functions To operate Fixed and Mobile Plant to process recyclable materials to ensure reduction of waste to landfill at all times. Note: in addition to these functions, employees are required to carry out such other duties as may reasonably be required. Main duties Operate appropriate machinery and plant, as required, to maintain the safe and efficient operation of the site at all times. Ensure that plant and machinery is maintained to required standards, including daily & weekly checks, refuelling, lubrication and greasing, and that defects and breakdowns are promptly recorded and reported. Maintain a safe working environment throughout your activities, including keeping working area tidy and access to walkways and emergency exits clear. Ensure appropriate safety equipment and PPE is used at all times. Checking of incoming loads, ensuring compliance with site license and permitted waste types. Immediately report: any contamination or non-conforming wastes delivered to site; accidents, incidents, and near misses; environmental hazards; health & safety breaches to the Supervisor or appropriate Manager. Undertake any training necessary to perform other tasks including the operation of other plant and equipment and/or supervisory duties. Complete Manual Handling activities to assist in waste management activities. Assist other operatives upon request and when authorised by your Supervisor. Carry out other operational duties where necessary for business continuity. Staff have a duty to take care of their own health and safety and that of others who may be affected by their actions at work. Staff must co-operate, report unsafe conditions and comply with the company management systems and safe systems of work as well as co-workers to help everyone meet their legal requirements. The above list is not exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope and grading of the post and training/abilities of the post holder. Job descriptions are regularly reviewed to ensure they are an accurate representation of the post. Person specification Skills Essential: Good Communication Ability to operate and control equipment Time and Priority Management Ability to work in a fast paced, busy environment Desirable: Problem Solving Experience Essential: Previous experience operating plant such as loading shovels, telehandlers, teletrucks, baler and clamps and 360 wheeled materials handler Desirable: Experience in the Waste Industry Experience with Shredders, Shovels, wheeled and tracked 360's, telehandler, clamp trucks, scissor lift/ cherry picker. Qualifications Essential: Tickets for mobile and/or fixed plant. Competencies Essential: Pay attention to detail Ability to work alone or in a team Positive Attitude Desirable: Ability to plan own work Benefits: Company Pension Company events On site parking Cycle to work scheme Wellness programme Investment in career development 28 days holiday including bank holidays Bank Holiday working bonus Employee Assistance Programme Please click on the APPLY button to send your CV and Cover Letter for this role. Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK. Candidates with the relevant experience or job title of: Machine Operator, Manufacturing Operative, Manufacturing Engineer, Junior Production Operative, Production Technician, Junior Service Engineer, Graduate Mechanical Engineer, Mechanical Technician, Junior Electrical Technician, Trainee Repair Engineer, Mechanical Engineer, Machine Operator, Machine Technician, Machine Operative may also be considered for this role.
Mar 28, 2024
Full time
Job Title: Machine Operator Location: Ridham, Sittingbourne, Kent Salary: £14.00 per hour (dependant on experience) plus monthly KPI bonus Job type: Permanent, Full-time (55 hours per week on a rota basis Monday - Sunday) Countrystyle is a dynamic, privately owned resource management and waste recycling business. With a track record of spotting opportunities, understanding the market and driving innovative solutions, we deliver a reliable service which reduces the impact on the environment of our clients' waste, whilst creating cost-effective and reliable waste management outcomes which encourage a greener business acumen. Main job functions To operate Fixed and Mobile Plant to process recyclable materials to ensure reduction of waste to landfill at all times. Note: in addition to these functions, employees are required to carry out such other duties as may reasonably be required. Main duties Operate appropriate machinery and plant, as required, to maintain the safe and efficient operation of the site at all times. Ensure that plant and machinery is maintained to required standards, including daily & weekly checks, refuelling, lubrication and greasing, and that defects and breakdowns are promptly recorded and reported. Maintain a safe working environment throughout your activities, including keeping working area tidy and access to walkways and emergency exits clear. Ensure appropriate safety equipment and PPE is used at all times. Checking of incoming loads, ensuring compliance with site license and permitted waste types. Immediately report: any contamination or non-conforming wastes delivered to site; accidents, incidents, and near misses; environmental hazards; health & safety breaches to the Supervisor or appropriate Manager. Undertake any training necessary to perform other tasks including the operation of other plant and equipment and/or supervisory duties. Complete Manual Handling activities to assist in waste management activities. Assist other operatives upon request and when authorised by your Supervisor. Carry out other operational duties where necessary for business continuity. Staff have a duty to take care of their own health and safety and that of others who may be affected by their actions at work. Staff must co-operate, report unsafe conditions and comply with the company management systems and safe systems of work as well as co-workers to help everyone meet their legal requirements. The above list is not exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope and grading of the post and training/abilities of the post holder. Job descriptions are regularly reviewed to ensure they are an accurate representation of the post. Person specification Skills Essential: Good Communication Ability to operate and control equipment Time and Priority Management Ability to work in a fast paced, busy environment Desirable: Problem Solving Experience Essential: Previous experience operating plant such as loading shovels, telehandlers, teletrucks, baler and clamps and 360 wheeled materials handler Desirable: Experience in the Waste Industry Experience with Shredders, Shovels, wheeled and tracked 360's, telehandler, clamp trucks, scissor lift/ cherry picker. Qualifications Essential: Tickets for mobile and/or fixed plant. Competencies Essential: Pay attention to detail Ability to work alone or in a team Positive Attitude Desirable: Ability to plan own work Benefits: Company Pension Company events On site parking Cycle to work scheme Wellness programme Investment in career development 28 days holiday including bank holidays Bank Holiday working bonus Employee Assistance Programme Please click on the APPLY button to send your CV and Cover Letter for this role. Overseas candidates will NOT be considered for this role. We are not sponsoring Visa's at this time, so please refrain from applying unless eligible to work in the UK. Candidates with the relevant experience or job title of: Machine Operator, Manufacturing Operative, Manufacturing Engineer, Junior Production Operative, Production Technician, Junior Service Engineer, Graduate Mechanical Engineer, Mechanical Technician, Junior Electrical Technician, Trainee Repair Engineer, Mechanical Engineer, Machine Operator, Machine Technician, Machine Operative may also be considered for this role.
Job Title: General Black Hat Supervisor- Welding Clearance required: BPSS Duration: 6 Month s Location: Hinkley point C - 2/3 days onsite Contarct Inside IR35 Job Description: The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on HPC site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (HPC Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the HPC Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and experiences HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications - Essential Qualification required ideally experience on HPC one of A,B,C & D One of the following from A and B and C and D: A Level 3 Pipe Welder Apprenticeship Standard (ST0851) An equivalent Apprenticeship in a Welding discipline Diploma in: Welding Engineering Construction Pipework Welding Engineering Construction Plate Engineering Construction (Pipework or Plate) at SCQF Level 7 B CSWIP certificate L2 PCN Certificate C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician; Engineering Fitter; Metal Fabricator; Project Controls Technician Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training) CCNSG TMIC trained (First Aid at Work trained) IC trained TMIC trained (First Aid at Work trained) IC trained Background Experience in managing people on large scale/international projects
Mar 28, 2024
Contractor
Job Title: General Black Hat Supervisor- Welding Clearance required: BPSS Duration: 6 Month s Location: Hinkley point C - 2/3 days onsite Contarct Inside IR35 Job Description: The Black Hat Supervisor will support and supervise projects of Temporary Buildings or Structures erection on HPC site (subcontracted projects). As a Black Hat (non-working supervisor), manage all Health & Safety aspects of Installation activities on site Risk Assessments/Point of Work Risk Assessments review, Toolbox Talks, on site supervision ensuring that all company policies are adhered to. Main Responsibilities Provide technical advice and propose technical solutions where required Review and approve technical & safety documentation Be involved in technical and planning discussions with client (HPC Principal Contractor) Ensure installation of works is as per design and process Deliver works on time and within parameters of the budget set for the task. Supervise contracted staff Prepare site reports and fill in needed documentation Manage and ensure compliance of the NNB permit to work processes Attend coordination meetings with the HPC Principal Contractor and their other tier 1 contractors Act as and Incident Controller (IC) Act as Trauma and Medical Immediate Care (TMIC) Key Skills and experiences HPC experience (desirable) Computer literate Basic mechanical & electrical knowledge Candidate must be a strong team leader who pays attention to safety and quality as a priority, always leading by example Must be able to set people to work and ensure works are delivered as per design, on time and on budget Project management Large Construction Teams management Team working and relationship-building skills Communication skills Technical skills Industrial relations management An eye for detail Problem solving Qualifications - Essential Qualification required ideally experience on HPC one of A,B,C & D One of the following from A and B and C and D: A Level 3 Pipe Welder Apprenticeship Standard (ST0851) An equivalent Apprenticeship in a Welding discipline Diploma in: Welding Engineering Construction Pipework Welding Engineering Construction Plate Engineering Construction (Pipework or Plate) at SCQF Level 7 B CSWIP certificate L2 PCN Certificate C Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit Nuclear Engineering Construction Supervisor (NECS) D LATS SMSTS IOSH Managing Safely Level 3 Apprenticeship in at least one of the following: Engineering Construction - Pipefitting Standard or Mechanical or Plating; Maintenance and Operations Engineering Technician; Engineering Fitter; Metal Fabricator; Project Controls Technician Enrolment onto ILM Level 3 Certificate C&BE plus completion of Nuclear Unit or Nuclear Engineering Construction Supervisor (NECS) And at least one of the following: LATS, SMSTS or IOSH Managing Safely Essential training for the role (HPC specific training) CCNSG TMIC trained (First Aid at Work trained) IC trained TMIC trained (First Aid at Work trained) IC trained Background Experience in managing people on large scale/international projects
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Apache Mechanics and Avionic Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Apache Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sign-On Bonus. Potential to earn more with overtime and TDY Annual Completion Bonus. Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Mar 28, 2024
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Apache Mechanics and Avionic Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Apache Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sign-On Bonus. Potential to earn more with overtime and TDY Annual Completion Bonus. Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Mar 28, 2024
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Chinook Mechanics and Avionic Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as a Chinook Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sign-On Bonus. Potential to earn more with overtime and TDY Annual Completion Bonus. Asistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Mar 28, 2024
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Chinook Mechanics and Avionic Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as a Chinook Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sign-On Bonus. Potential to earn more with overtime and TDY Annual Completion Bonus. Asistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
In this position, reporting directly to the Account Manager, you will oversee the Technical Events Team, in delivering exhibition and event services. This involves the temporary services connections of power, water, waste, compressed air, and gas to the exhibitions. It also involves marking out of the halls for each exhibition and the trades services delivered to the exhibition. The Contract Manager is expected to be familiar with all aspects of the engineering operations and administration within the contract. In general, your responsibilities will be to ensure the operational resources, plant, labour, and infrastructure are in place to ensure correct, safe, and efficient function temporary services. This person will be charged with the day-to-day operational responsibility of the Technical Events Team. It is the Contract Managers' role to provide leadership to all the contract site direct and sub-contract staff, to ensure that the objectives of the contract are met, especially (but not limited to) Health & Safety, 100% delivery of services, quickly and professionally responding to the needs of Clients Electrical & Mechanical Services Manager. The Contract Manager will be responsible for the financial aspects of the contract and recruitment of operational Technician level staff. You will be a key contact in the event of any operational issues, out of hours, and must be able to react in a methodical and controlled manner, keeping the client fully briefed on both the incident and the strategy to resolution. This will be on a Duty Manager Roster alongside other Managers and Supervisors on the contract. You should be familiar with current health and Safety legislation including RIDDOR, LOLER and the control and prevention of legionella bacteria. This will also include but not limited to compliance with local authorities, statutory requirements, and any other codes of practice. Key Tasks Duties to include: P&L Responsibility of the Contract Sector, Daily management of the Technical Events Team, including compliance with CBRE disciplinary processes and procedures. To direct, instruct and manage all CBRE staff under their control as well as sub-contract staff ensuring compliance with working practices. QHSE responsibility of Contract Sector Control of circa 750k of temporary labour To support the growth of Event Based Sales linked to the exhibitions. Build working relationships with multiple key individuals on site. Attend regular site meetings with clients for planning and updating. Detailed financial reporting on budgetary spend. To attend weekly operations meeting, client meetings as requested, in conjunction with the client. To prepare the Monthly Hard Services Report for the Contract Sector ensuring that significant events or activities are noted. To conduct regular reviews of operating procedures making recommendations for improvement with appropriate working practices and emergency/contingency procedures within the critical systems. To manage holiday, sickness, training and risk and reward entitlement, maintaining the correct and required staff level within the building. Personal Attributes: 5 years previous experience in a Facilities Management or a similar environment. Completed recognised formal Electrical or Mechanical training to at least city and Guilds level, preferably ONC/HNC or Higher. Strong communication skills Ability to lead motivate and direct a team of technicians/operatives. Possess an understanding of Health and Safety issues, NEBOSH / IOSH, or equivalent formal training would be desirable. Training will be made available. Conversant with Microsoft Office (Word, Excel, Outlook, PowerPoint). A good level of English and Mathematics required. Strong organisational and communication skills with the ability to prioritise workloads. Ability to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints. Individuals who can demonstrate commitment and previous experience; but not meet all the required technical qualifications may be considered subject to client approval. Provide leadership, and that contractual commitments are met and exceeded. Ensuring business policies and processes are effectively communicated and implemented within the contract. Ensure contracts are staffed by fully competent teams, ensuring post holders are fully competent, and that effective succession planning arrangements are in place. Working with other Contract/Account Managers to ensure the collaborative development of the business, effective teamworking, and support to colleagues. Development of contract financial plans for revenue and profit delivery, reduction of WIP, debt, cost reduction and contract growth, and ensure that these are met and exceeded. Ensure appropriate control systems to ensure statutory, policy and contractual commitments are met. Ensuring a customer focus within all areas of operational activities, and that effective relationships are maintained with key client contacts. Promoting and maintaining the core Values of CBRE Managed Services. Provision of leadership and guidance, advice, coaching and direct support, where required to deliver best practice selection, training, assessment and recognition/reward. Provide a learning environment, and appropriate training and development planning. Ensure basic training needs are delivered, employees are fully competent to undertake their roles, and are able to reach their full future potential. Review and support implementation of site-specific standard and emergency operating procedures The above is a guideline to the role and is not intended to be fully inclusive or exclusive of the duties required
Mar 28, 2024
Full time
In this position, reporting directly to the Account Manager, you will oversee the Technical Events Team, in delivering exhibition and event services. This involves the temporary services connections of power, water, waste, compressed air, and gas to the exhibitions. It also involves marking out of the halls for each exhibition and the trades services delivered to the exhibition. The Contract Manager is expected to be familiar with all aspects of the engineering operations and administration within the contract. In general, your responsibilities will be to ensure the operational resources, plant, labour, and infrastructure are in place to ensure correct, safe, and efficient function temporary services. This person will be charged with the day-to-day operational responsibility of the Technical Events Team. It is the Contract Managers' role to provide leadership to all the contract site direct and sub-contract staff, to ensure that the objectives of the contract are met, especially (but not limited to) Health & Safety, 100% delivery of services, quickly and professionally responding to the needs of Clients Electrical & Mechanical Services Manager. The Contract Manager will be responsible for the financial aspects of the contract and recruitment of operational Technician level staff. You will be a key contact in the event of any operational issues, out of hours, and must be able to react in a methodical and controlled manner, keeping the client fully briefed on both the incident and the strategy to resolution. This will be on a Duty Manager Roster alongside other Managers and Supervisors on the contract. You should be familiar with current health and Safety legislation including RIDDOR, LOLER and the control and prevention of legionella bacteria. This will also include but not limited to compliance with local authorities, statutory requirements, and any other codes of practice. Key Tasks Duties to include: P&L Responsibility of the Contract Sector, Daily management of the Technical Events Team, including compliance with CBRE disciplinary processes and procedures. To direct, instruct and manage all CBRE staff under their control as well as sub-contract staff ensuring compliance with working practices. QHSE responsibility of Contract Sector Control of circa 750k of temporary labour To support the growth of Event Based Sales linked to the exhibitions. Build working relationships with multiple key individuals on site. Attend regular site meetings with clients for planning and updating. Detailed financial reporting on budgetary spend. To attend weekly operations meeting, client meetings as requested, in conjunction with the client. To prepare the Monthly Hard Services Report for the Contract Sector ensuring that significant events or activities are noted. To conduct regular reviews of operating procedures making recommendations for improvement with appropriate working practices and emergency/contingency procedures within the critical systems. To manage holiday, sickness, training and risk and reward entitlement, maintaining the correct and required staff level within the building. Personal Attributes: 5 years previous experience in a Facilities Management or a similar environment. Completed recognised formal Electrical or Mechanical training to at least city and Guilds level, preferably ONC/HNC or Higher. Strong communication skills Ability to lead motivate and direct a team of technicians/operatives. Possess an understanding of Health and Safety issues, NEBOSH / IOSH, or equivalent formal training would be desirable. Training will be made available. Conversant with Microsoft Office (Word, Excel, Outlook, PowerPoint). A good level of English and Mathematics required. Strong organisational and communication skills with the ability to prioritise workloads. Ability to work under pressure whilst remaining calm, clear thinking and able to deliver the required services to the client within given time constraints. Individuals who can demonstrate commitment and previous experience; but not meet all the required technical qualifications may be considered subject to client approval. Provide leadership, and that contractual commitments are met and exceeded. Ensuring business policies and processes are effectively communicated and implemented within the contract. Ensure contracts are staffed by fully competent teams, ensuring post holders are fully competent, and that effective succession planning arrangements are in place. Working with other Contract/Account Managers to ensure the collaborative development of the business, effective teamworking, and support to colleagues. Development of contract financial plans for revenue and profit delivery, reduction of WIP, debt, cost reduction and contract growth, and ensure that these are met and exceeded. Ensure appropriate control systems to ensure statutory, policy and contractual commitments are met. Ensuring a customer focus within all areas of operational activities, and that effective relationships are maintained with key client contacts. Promoting and maintaining the core Values of CBRE Managed Services. Provision of leadership and guidance, advice, coaching and direct support, where required to deliver best practice selection, training, assessment and recognition/reward. Provide a learning environment, and appropriate training and development planning. Ensure basic training needs are delivered, employees are fully competent to undertake their roles, and are able to reach their full future potential. Review and support implementation of site-specific standard and emergency operating procedures The above is a guideline to the role and is not intended to be fully inclusive or exclusive of the duties required
An experienced and qualified Electrical Fitter / Supervisor with experience in running installation / service teams on-site is needed to join our team at Rhino Site Systems, a leading door installation and servicing company based in Preston on a full-time basis. This role is National, so the relevant candidate will be working away from home for a large percentage of the time, which could include the odd weekend. This includes travelling to the site, depending on the site location. Our Depots are currently at Port Talbot, South Wales and Bamber Bridges, Preston, Lancashire, so the candidates must live within a commutable distance as there is no dedicated vehicle for this position. This is an excellent opportunity to progress your career with a well-established company! About Us At Rhino Site Systems, we provide premium levels of after-sales and installation services to clients in a range of industries. We've been installing and servicing doors for over 30 years, and due to our consistently high standards of work and customer service, we've built up a first-class reputation across sectors including nuclear, defence and critical national infrastructure. About the Role You will work as a Site team member to provide a combination of installation, repairs, and servicing of various types of doors, but mainly Rhino Doors, including all associated hardware and components. You will be a part of the Servicing and Installation department and will report directly to the Managing Director. Much of our work requires the candidate to undergo a Security clearance, which will include background checks, references for the previous 3 years of employment, residential checks, medical and complete random Drugs and Alcohol checks. A clean driving licence is also required. Key Responsibilities: Install, service and maintain the Rhino Group range of doors, which can be NPSA (CPNI) rated. The range includes Sliding-folding, bi-fold doors, side-hinged doors and fire doors. All doors can be either mechanical or electrically operated Provide an innovative and technically aware approach to problem-solving Comply with all Health & Safety requirements. Lead an on-site team of fitters to ensure the project is completed within the allocated time and to the high standards required Ensure that all HSE and company paperwork is completed and returned to the office after the project has been completed Ensure appropriate audits and checks are carried out on Rhino equipment in line with relevant standards Receive and put into action all written and verbal instructions as required Train and supervise all team members to ensure they adhere to all safety documentation Required Experience: Qualification: IPAF, PASMA (Company will pay for these for the right candidate, but costs will have to be reimbursed should they leave within one year) Candidates must be able to demonstrate that they have experience in running Installation/service teams on-site and have SSSTS Card as a minimum All Electricians Must be fully qualified up to 18th Edition as a minimum All Engineers will be required to have CSCS Cards as a minimum, but all Supervisors will require SSSTS cards. (Company will pay for the upgrade for the right candidate) The ability to read manufacturing or electrical drawings would also be essential Sounds interesting? Click the APPLY button to send your CV for immediate consideration. Candidates with previous experience or job titles, including; Installation Electrician, Electrician, Electrical Inspection, Qualified Electrician, Electrical Testing, 18th Edition, Testing Electrician, Inspection Electrician, Electrical Tester, and Electrical Inspector may also be considered for this role.
Mar 28, 2024
Full time
An experienced and qualified Electrical Fitter / Supervisor with experience in running installation / service teams on-site is needed to join our team at Rhino Site Systems, a leading door installation and servicing company based in Preston on a full-time basis. This role is National, so the relevant candidate will be working away from home for a large percentage of the time, which could include the odd weekend. This includes travelling to the site, depending on the site location. Our Depots are currently at Port Talbot, South Wales and Bamber Bridges, Preston, Lancashire, so the candidates must live within a commutable distance as there is no dedicated vehicle for this position. This is an excellent opportunity to progress your career with a well-established company! About Us At Rhino Site Systems, we provide premium levels of after-sales and installation services to clients in a range of industries. We've been installing and servicing doors for over 30 years, and due to our consistently high standards of work and customer service, we've built up a first-class reputation across sectors including nuclear, defence and critical national infrastructure. About the Role You will work as a Site team member to provide a combination of installation, repairs, and servicing of various types of doors, but mainly Rhino Doors, including all associated hardware and components. You will be a part of the Servicing and Installation department and will report directly to the Managing Director. Much of our work requires the candidate to undergo a Security clearance, which will include background checks, references for the previous 3 years of employment, residential checks, medical and complete random Drugs and Alcohol checks. A clean driving licence is also required. Key Responsibilities: Install, service and maintain the Rhino Group range of doors, which can be NPSA (CPNI) rated. The range includes Sliding-folding, bi-fold doors, side-hinged doors and fire doors. All doors can be either mechanical or electrically operated Provide an innovative and technically aware approach to problem-solving Comply with all Health & Safety requirements. Lead an on-site team of fitters to ensure the project is completed within the allocated time and to the high standards required Ensure that all HSE and company paperwork is completed and returned to the office after the project has been completed Ensure appropriate audits and checks are carried out on Rhino equipment in line with relevant standards Receive and put into action all written and verbal instructions as required Train and supervise all team members to ensure they adhere to all safety documentation Required Experience: Qualification: IPAF, PASMA (Company will pay for these for the right candidate, but costs will have to be reimbursed should they leave within one year) Candidates must be able to demonstrate that they have experience in running Installation/service teams on-site and have SSSTS Card as a minimum All Electricians Must be fully qualified up to 18th Edition as a minimum All Engineers will be required to have CSCS Cards as a minimum, but all Supervisors will require SSSTS cards. (Company will pay for the upgrade for the right candidate) The ability to read manufacturing or electrical drawings would also be essential Sounds interesting? Click the APPLY button to send your CV for immediate consideration. Candidates with previous experience or job titles, including; Installation Electrician, Electrician, Electrical Inspection, Qualified Electrician, Electrical Testing, 18th Edition, Testing Electrician, Inspection Electrician, Electrical Tester, and Electrical Inspector may also be considered for this role.
Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Global Workplace Solutions (GWS) is a division of CBRE uniquely positioned to provide a complete set of services to corporate occupiers of commercial real estate across EMEA. GWS is redefining 'workplace' because we believe every place of work can become a competitive advantage for our clients. Productivity, reliability, engagement, quality, brand - the workplace contributes to business results, whether it's an office, a retail outlet, a laboratory, a data centre, a manufacturing environment or a virtual location. Job Title: Mobile Multi-Skilled Mechanical Engineer CBRE Global Workplace Solutions, leading global provider of integrated facilities and corporate real estate management, are recruiting a Mechanical Engineer to join the team covering sites in Greenford, Thatcham, Reading, and Bracknell. Purpose of Job To carry out planned preventative maintenance and reactive works to client systems. Key Responsibilities Ensure that routine maintenance is carried out to all Heating & Air-conditioning plant to meet and exceed expectations, and agreed service level agreements. Ensure that Evaporative Cooling Systems and Domestic water systems are maintained to comply with the requirements of the L8 standard. Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times. To carry out planned preventative maintenance and reactive works to other site plant as required. Ensure that suitable spares are available to carry out maintenance of the above plant. Ensure that comprehensive maintenance records are kept in the form of "Frontline" task sheets. Ensure that Method Statements and Risk Assessments are prepared for all tasks carried out to ensure safe working practices To develop a good working relationship with all members of CBRE Managed Services staff and clients staff. Ensure the provision of a safe & healthy working environment, and ensure compliance with all Company policies and procedures, as well as client site policies, procedures and working arrangements, as required. Ensure a professional image of CBRE Managed Services is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Ensure that professional and technical skills are maintained through a commitment to personal development and life-long-learning. Accountabilities Accountable to Contract Supervisor and Area Manager. The post holder does not have any directly reporting staff. This post carries no direct budgetary responsibility Person Specification Education A good basic education is essential, with good written and spoken English and basic Mathematics skills. Training Formally trained in mechanical services maintenance Basic skills on building management systems would be an advantage Formal health and safety training (Desirable) Experience Experience of maintaining Pumps, Motors and Valves Experience of operating Cooling Towers Sound understanding and experience of meeting health and safety obligations with regard to maintenance activities Working on a client resident site (Desirable) Formally certified for Maintenance and Operation of Evaporative Cooling Systems (Desirable) Aptitudes Good verbal communication skills Good written English skills Character Committed to the delivery of excellent customer service. Calm manner, able to work under pressure. Able to make sound decisions when needed. Physically fit and able to carry tools and components by hand up to 20kg. Able to ascend and descend vertical access equipment. Able to work at heights and on roofs. A team player, able to work with CBRE Managed Services and clients staff of all levels. Circumstances Able to attend the site location within one hour of notification to participate in out-of-hours rostered stand-by and call-out procedures.
Mar 28, 2024
Full time
Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Global Workplace Solutions (GWS) is a division of CBRE uniquely positioned to provide a complete set of services to corporate occupiers of commercial real estate across EMEA. GWS is redefining 'workplace' because we believe every place of work can become a competitive advantage for our clients. Productivity, reliability, engagement, quality, brand - the workplace contributes to business results, whether it's an office, a retail outlet, a laboratory, a data centre, a manufacturing environment or a virtual location. Job Title: Mobile Multi-Skilled Mechanical Engineer CBRE Global Workplace Solutions, leading global provider of integrated facilities and corporate real estate management, are recruiting a Mechanical Engineer to join the team covering sites in Greenford, Thatcham, Reading, and Bracknell. Purpose of Job To carry out planned preventative maintenance and reactive works to client systems. Key Responsibilities Ensure that routine maintenance is carried out to all Heating & Air-conditioning plant to meet and exceed expectations, and agreed service level agreements. Ensure that Evaporative Cooling Systems and Domestic water systems are maintained to comply with the requirements of the L8 standard. Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times. To carry out planned preventative maintenance and reactive works to other site plant as required. Ensure that suitable spares are available to carry out maintenance of the above plant. Ensure that comprehensive maintenance records are kept in the form of "Frontline" task sheets. Ensure that Method Statements and Risk Assessments are prepared for all tasks carried out to ensure safe working practices To develop a good working relationship with all members of CBRE Managed Services staff and clients staff. Ensure the provision of a safe & healthy working environment, and ensure compliance with all Company policies and procedures, as well as client site policies, procedures and working arrangements, as required. Ensure a professional image of CBRE Managed Services is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Ensure that professional and technical skills are maintained through a commitment to personal development and life-long-learning. Accountabilities Accountable to Contract Supervisor and Area Manager. The post holder does not have any directly reporting staff. This post carries no direct budgetary responsibility Person Specification Education A good basic education is essential, with good written and spoken English and basic Mathematics skills. Training Formally trained in mechanical services maintenance Basic skills on building management systems would be an advantage Formal health and safety training (Desirable) Experience Experience of maintaining Pumps, Motors and Valves Experience of operating Cooling Towers Sound understanding and experience of meeting health and safety obligations with regard to maintenance activities Working on a client resident site (Desirable) Formally certified for Maintenance and Operation of Evaporative Cooling Systems (Desirable) Aptitudes Good verbal communication skills Good written English skills Character Committed to the delivery of excellent customer service. Calm manner, able to work under pressure. Able to make sound decisions when needed. Physically fit and able to carry tools and components by hand up to 20kg. Able to ascend and descend vertical access equipment. Able to work at heights and on roofs. A team player, able to work with CBRE Managed Services and clients staff of all levels. Circumstances Able to attend the site location within one hour of notification to participate in out-of-hours rostered stand-by and call-out procedures.
Depot Manager - INHERIT A STRONG OPERATION BUT DON'T BE AFRAID OF A CHALLENGE! Salary £40K - 50K + Bonus & a company vehicle! Join a reputable specialist hire business offering strong career prospects. They have a solid operation, great products and a brand you'll truly be proud to represent! Why wouldn't you apply?! Responsibilities of the Depot Manager will include, but are not limited to: Creating & maintaining a happy, motivated environment for your workforce As the Depot Manager, you will manage a team of engineers, drivers and yard operatives within a specialist equipment hire depot, typically 8 staff. Organising the daily tasks of the depot Responsible for all health and safety and other safety at work requirements Maintain high standards of work whilst ensuring that the depot runs smoothly Ensuring that contribution targets for the depot are achieved You will have knowledge of the following construction sectors, plant hire, tool hire, powered access, trenching and shoring, lifting, non mechanical, power generation, accommodation or other specialist equipment hire. To be successful as the Depot Manager you will have worked in positions such as a Asset Manager, Plant Manager, Assistant Manager, Regional Manager, Branch Manager or Depot Manager, Workshop Manager, Operations Manager, Hire Manager, Rental Manager, General Manager or a Hire Supervisor. Benefits of the Depot Manager No weekend work! Circa £40,000 - £50,000 per annum DOE + Bonus Company Vehicle Free on-site Parking! Employer contributory pension 22 days annual leave plus bank holidays (increases with service) The successful Depot Manager will ideally live in the following areas: Hastingwood, Roydon, Harlow, Enfield, Chelmsford, Bishops Stortford, Ware, Hertford, Brentwood, Hatfield, Cheshunt & surrounding areas. Keen to be the new Depot Manager for a thriving company!? Hit the APPLY button today if this role is of interest to you - interviews will take place ASAP so don't wait! You can contact Dario on (phone number removed) or (url removed)
Mar 27, 2024
Full time
Depot Manager - INHERIT A STRONG OPERATION BUT DON'T BE AFRAID OF A CHALLENGE! Salary £40K - 50K + Bonus & a company vehicle! Join a reputable specialist hire business offering strong career prospects. They have a solid operation, great products and a brand you'll truly be proud to represent! Why wouldn't you apply?! Responsibilities of the Depot Manager will include, but are not limited to: Creating & maintaining a happy, motivated environment for your workforce As the Depot Manager, you will manage a team of engineers, drivers and yard operatives within a specialist equipment hire depot, typically 8 staff. Organising the daily tasks of the depot Responsible for all health and safety and other safety at work requirements Maintain high standards of work whilst ensuring that the depot runs smoothly Ensuring that contribution targets for the depot are achieved You will have knowledge of the following construction sectors, plant hire, tool hire, powered access, trenching and shoring, lifting, non mechanical, power generation, accommodation or other specialist equipment hire. To be successful as the Depot Manager you will have worked in positions such as a Asset Manager, Plant Manager, Assistant Manager, Regional Manager, Branch Manager or Depot Manager, Workshop Manager, Operations Manager, Hire Manager, Rental Manager, General Manager or a Hire Supervisor. Benefits of the Depot Manager No weekend work! Circa £40,000 - £50,000 per annum DOE + Bonus Company Vehicle Free on-site Parking! Employer contributory pension 22 days annual leave plus bank holidays (increases with service) The successful Depot Manager will ideally live in the following areas: Hastingwood, Roydon, Harlow, Enfield, Chelmsford, Bishops Stortford, Ware, Hertford, Brentwood, Hatfield, Cheshunt & surrounding areas. Keen to be the new Depot Manager for a thriving company!? Hit the APPLY button today if this role is of interest to you - interviews will take place ASAP so don't wait! You can contact Dario on (phone number removed) or (url removed)