Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Apr 18, 2024
Contractor
Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities KEY PURPOSE Weatherford have an exciting opportunity for an Electro-Mechanical Technician to join the team in Aberdeen. The Electro-Mechanical Technician will have a responsibility to perform qualification testing, assembly, factory acceptance testing and service redress of Weatherford products. KEY RESPONSIBILITIES Assembles and completes Factory Acceptance Testing of WCT products as per technical documentation, drawing specification, process, QC and QA. In collaboration with engineering, assembles first article products and develops assembly and factory acceptance test technical documentation. Conduct in-house test requirements in line with the defines assembly & test procedures In collaboration with engineering executes product qualification test programs and test reporting. Ensures Factory Acceptance Testing of products as per engineering technical documentation, drawing specification, process, QC and QA. Supports effective assembly planning and kitting operations with respect to production schedules. Performs house-keeping duties as required with working in an assembly workshop. Compiles and completes necessary assembly and testing documentation to verify conformance, providing full traceability of all activity associated with the assembly and factory acceptance testing of products. Represents Weatherford via collaboration with third party inspectors as necessary to ensure customer quality control plan witness requirements are adhered to. Supports design for assembly via attendance and contribution to product design reviews and production line assembly design reviews. Provides continual improvement feedback to line management and engineering as necessary to ensure assembly and factory acceptance test operations are adequately resourced. Collaborates with inspection and engineering as necessary to troubleshoot and fault find non-conforming components, sub-assemblies and/or products. Supports technology transfer, know how, training and competency development of strategic manufacturing hub workshop technicians. Any other delegated responsibilities as instructed by Line Management within the timeframe specified in a safe and efficient manner to meet business requirements, provided the instruction is reasonable and you are capable and competent to fulfil these. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Participate in toolbox talks, scheduled hazard hunts and workplace inspections. Create task specific and area risk assessments. Ensure compliance with all Weatherford's policies. Qualifications KNOWLEDGE, SKILLS & EXPERIENCE • Experience in the assembly & test of Completion products. • Experience in the assembly of electro, hydraulic mechanical systems. • Experience in fitting and safety protocols associated with high pressure assembly and hydrostatic test operations. • Proficient at interpreting engineering drawings • Experience of working to NAS 6 cleanliness standards. • Working knowledge of goods in, stores and dispatch procedures. • Working knowledge of ISO9001 and API Quality Management Systems. • Understanding of associated customer quality expectations and the cost of product quality irregularity. • Working knowledge of mechanical engineering practices, standards and specifications. • Proven fault finding skills. • A working knowledge of Microsoft Office. EDUCATION & TRAINING A Relevant College Education Diploma/Certificate. Forklift Certification. Gantry Crane/Banksman Slinger Certification. Proficient User Of Microsoft Office Applications PERSONAL QUALITIES Committed to providing a quality product to the end user. Willingness to collaborate across functions as necessary to continually improve product assembly and factory acceptance test operations. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi functional environment. Function effectively under pressure throughout busy periods. Availability for travel as necessary to support effective technology transfer activities.
Apr 18, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities KEY PURPOSE Weatherford have an exciting opportunity for an Electro-Mechanical Technician to join the team in Aberdeen. The Electro-Mechanical Technician will have a responsibility to perform qualification testing, assembly, factory acceptance testing and service redress of Weatherford products. KEY RESPONSIBILITIES Assembles and completes Factory Acceptance Testing of WCT products as per technical documentation, drawing specification, process, QC and QA. In collaboration with engineering, assembles first article products and develops assembly and factory acceptance test technical documentation. Conduct in-house test requirements in line with the defines assembly & test procedures In collaboration with engineering executes product qualification test programs and test reporting. Ensures Factory Acceptance Testing of products as per engineering technical documentation, drawing specification, process, QC and QA. Supports effective assembly planning and kitting operations with respect to production schedules. Performs house-keeping duties as required with working in an assembly workshop. Compiles and completes necessary assembly and testing documentation to verify conformance, providing full traceability of all activity associated with the assembly and factory acceptance testing of products. Represents Weatherford via collaboration with third party inspectors as necessary to ensure customer quality control plan witness requirements are adhered to. Supports design for assembly via attendance and contribution to product design reviews and production line assembly design reviews. Provides continual improvement feedback to line management and engineering as necessary to ensure assembly and factory acceptance test operations are adequately resourced. Collaborates with inspection and engineering as necessary to troubleshoot and fault find non-conforming components, sub-assemblies and/or products. Supports technology transfer, know how, training and competency development of strategic manufacturing hub workshop technicians. Any other delegated responsibilities as instructed by Line Management within the timeframe specified in a safe and efficient manner to meet business requirements, provided the instruction is reasonable and you are capable and competent to fulfil these. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Participate in toolbox talks, scheduled hazard hunts and workplace inspections. Create task specific and area risk assessments. Ensure compliance with all Weatherford's policies. Qualifications KNOWLEDGE, SKILLS & EXPERIENCE • Experience in the assembly & test of Completion products. • Experience in the assembly of electro, hydraulic mechanical systems. • Experience in fitting and safety protocols associated with high pressure assembly and hydrostatic test operations. • Proficient at interpreting engineering drawings • Experience of working to NAS 6 cleanliness standards. • Working knowledge of goods in, stores and dispatch procedures. • Working knowledge of ISO9001 and API Quality Management Systems. • Understanding of associated customer quality expectations and the cost of product quality irregularity. • Working knowledge of mechanical engineering practices, standards and specifications. • Proven fault finding skills. • A working knowledge of Microsoft Office. EDUCATION & TRAINING A Relevant College Education Diploma/Certificate. Forklift Certification. Gantry Crane/Banksman Slinger Certification. Proficient User Of Microsoft Office Applications PERSONAL QUALITIES Committed to providing a quality product to the end user. Willingness to collaborate across functions as necessary to continually improve product assembly and factory acceptance test operations. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi functional environment. Function effectively under pressure throughout busy periods. Availability for travel as necessary to support effective technology transfer activities.
Job Title: Quality Supervisor - Inspection About Us: "OneSubsea is the world's leading subsea technology and solutions provider. They're the people calling for a new subsea era, where oil and gas production is a lot more efficient, and emissions are a lot lower. They're also pushing to accelerate subsea carbon capture and new energy solutions." We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Barrow-in-Furness, UK. OneSubsea - Barrow, is SLB's centre of excellence for subsea connector systems, delivering World class connector solutions to the global energy industry. Our facility designs and manufactures cutting edge power, instrumentation and fibre optic wet mate connector technology for demanding deepwater and high-pressure applications. With 5 business units equipped with moulding, machining, assembly and test facilities, and 150 highly skilled engineers, technologists and manufacturing personnel, we deliver connector innovation to meet an ever-increasing global demand. We are located in in the Northwest of England on the edge of the Lake District National Park, one of the most beautiful areas in the world and now a UNESCO World Heritage Site. Job Summary: The Inspection Quality Supervisor is responsible for the effective and efficient running of the inspection department. This role is responsible for the supervision, motivation, and development of the inspection team (currently 6) to ensure the workload is managed accordingly. This is a critical role within the business, as the Quality Inspection Supervisor will be responsible for the inspection of incoming items from suppliers, in process inspection, final inspection and calibration. Good interpersonal skills are a key requirement to enable establishment and growth of internal cross functional relationships, and inspection staff development, these are critical elements of this role. An open mind for change and continuous improvement is also essential. The Inspection Quality Supervisor reports directly to the Centre Quality Manager. Duties & Responsibilities: Team: Effective management of a team of inspectors. Motivation of both the whole team and individual members, to drive for positive change (continuous improvement), "We push further". Ongoing monitoring, identification and addressing of training needs. Balancing workload and team management duties. Effective delivery of day-to-day requirements to the team. Dissemination of KPI's to the team, to ensure alignment, "We pull together". Ensure safe, inclusive working environment. "We care deeply". SAP: Work with the Product Quality Engineer to monitor and report on the inspection backlog, weekly report out highlighting key data and any issues. Monitor the total QTY of PO line receipts Vs PO lines inspected and report out. Support in any ongoing SAP improvement activities, i.e., data driven improvements. Any other quality related SAP activities General: Management of the calibration system Be an active part of the Integrated Management System team. Inspection of incoming items, a portion of time. Assist other departments with internal quality queries. Participate in customer investigations, where necessary. Participate in or drive Continuous Improvement activities. Perform other related tasks as needed or at the discretion of next level manager. Keep up to date processes, procedures and instructions of the activity and work of the function. Skills and Experience: Proficient use of SAP and the full Microsoft office suite, including Power BI. Familiar with and able to use a range of inspection equipment. Problem solving, including full Root Cause Analysis processes and associated tools and techniques. Able to think quickly outside of the box for solutions when critical time sensitive issues arise. Preferable knowledge of ISO 9001 Preferably previous audit experience or willing to undertake an auditor course. Demonstratable experience in effectively managing and motivating a team of people. Qualifications: Knowledge of ISO 9001, and preferably ISO 14001, and ISO 45001 (latest revisions) Degree / HNC (Production / Mechanical / Electrical / Quality Engineering) Career Advancement: Every technical contributor in OneSubsea Barrow has access to a progression plan tailored to their job title, defining a clear path for promotion and reward, focusing on competency development. With support from Human Resources, Managers, and a network of technical experts, they are in control of their career growth from their first day of employment. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Apr 18, 2024
Full time
Job Title: Quality Supervisor - Inspection About Us: "OneSubsea is the world's leading subsea technology and solutions provider. They're the people calling for a new subsea era, where oil and gas production is a lot more efficient, and emissions are a lot lower. They're also pushing to accelerate subsea carbon capture and new energy solutions." We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Barrow-in-Furness, UK. OneSubsea - Barrow, is SLB's centre of excellence for subsea connector systems, delivering World class connector solutions to the global energy industry. Our facility designs and manufactures cutting edge power, instrumentation and fibre optic wet mate connector technology for demanding deepwater and high-pressure applications. With 5 business units equipped with moulding, machining, assembly and test facilities, and 150 highly skilled engineers, technologists and manufacturing personnel, we deliver connector innovation to meet an ever-increasing global demand. We are located in in the Northwest of England on the edge of the Lake District National Park, one of the most beautiful areas in the world and now a UNESCO World Heritage Site. Job Summary: The Inspection Quality Supervisor is responsible for the effective and efficient running of the inspection department. This role is responsible for the supervision, motivation, and development of the inspection team (currently 6) to ensure the workload is managed accordingly. This is a critical role within the business, as the Quality Inspection Supervisor will be responsible for the inspection of incoming items from suppliers, in process inspection, final inspection and calibration. Good interpersonal skills are a key requirement to enable establishment and growth of internal cross functional relationships, and inspection staff development, these are critical elements of this role. An open mind for change and continuous improvement is also essential. The Inspection Quality Supervisor reports directly to the Centre Quality Manager. Duties & Responsibilities: Team: Effective management of a team of inspectors. Motivation of both the whole team and individual members, to drive for positive change (continuous improvement), "We push further". Ongoing monitoring, identification and addressing of training needs. Balancing workload and team management duties. Effective delivery of day-to-day requirements to the team. Dissemination of KPI's to the team, to ensure alignment, "We pull together". Ensure safe, inclusive working environment. "We care deeply". SAP: Work with the Product Quality Engineer to monitor and report on the inspection backlog, weekly report out highlighting key data and any issues. Monitor the total QTY of PO line receipts Vs PO lines inspected and report out. Support in any ongoing SAP improvement activities, i.e., data driven improvements. Any other quality related SAP activities General: Management of the calibration system Be an active part of the Integrated Management System team. Inspection of incoming items, a portion of time. Assist other departments with internal quality queries. Participate in customer investigations, where necessary. Participate in or drive Continuous Improvement activities. Perform other related tasks as needed or at the discretion of next level manager. Keep up to date processes, procedures and instructions of the activity and work of the function. Skills and Experience: Proficient use of SAP and the full Microsoft office suite, including Power BI. Familiar with and able to use a range of inspection equipment. Problem solving, including full Root Cause Analysis processes and associated tools and techniques. Able to think quickly outside of the box for solutions when critical time sensitive issues arise. Preferable knowledge of ISO 9001 Preferably previous audit experience or willing to undertake an auditor course. Demonstratable experience in effectively managing and motivating a team of people. Qualifications: Knowledge of ISO 9001, and preferably ISO 14001, and ISO 45001 (latest revisions) Degree / HNC (Production / Mechanical / Electrical / Quality Engineering) Career Advancement: Every technical contributor in OneSubsea Barrow has access to a progression plan tailored to their job title, defining a clear path for promotion and reward, focusing on competency development. With support from Human Resources, Managers, and a network of technical experts, they are in control of their career growth from their first day of employment. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Morgan Jones Recruitment Consultants
Sittingbourne, Kent
Quality Inspector Location Sittingbourne, Kent Salary £26,000 - £29,000 per annum depending on experience Hours Monday to Friday Benefits Company events, pension, onsite parking, early finish on Fridays & 185 hours of annual leave per year Do you have a good understanding of ISO9001:2105 QMS requirements? Do you have experience in welding inspection protocols? We have an opportunity in Sittingbourne for a Quality Inspector to work for one of our clients. In this role, you will be working full-time, Monday to Friday, for a well-established and respected company that delivers high-quality products for its specialist client base. Responsibilities for the role of Quality Inspector Conduct inspections on engineering drawings, utilising gauges and relevant inspection equipment for dimensional and visual assessments. Conduct material inspections as part of the quality control process. Oversee the inspection of all received parts from suppliers, employing both manual and digital measuring devices. Take charge of identifying and investigating non-conforming parts, initiating the quarantine of items, generating non-conformance reports, and collaborating with suppliers for corrective actions. Execute and validate First Article Inspection (FAI) data per AS9102 requirements. Facilitate product release and acceptance within the company's ERP system. Engage in document reviews, analysis, inspection, and archiving in compliance with EPS requirements before the release of finished goods. Participate in forecasting and planning activities based on business requirements. Play an active role in enhancing the company's Quality Management System (QMS) through continuous improvement Skills and Experience: Good understanding of ISO9001:2015 QMS requirements and customer focus. Strong communication skills both verbal and written, with good interpersonal skills. Computer literacy, proficient in the use of Microsoft Word, Excel, Access and Outlook. Self-motivated and able to prioritise and resolve competing priorities and workloads. Knowledge of and ability to interpret engineering drawings and tolerances. Experience using a range of measuring instruments. Basic knowledge of welding inspection. Able to adapt to the ever-changing technology and willingness to learn new skills. Hands-on approach to problem-solving and attention to detail. Excellent team working skills. Previous experience working in in a Quality role would be beneficial. Understanding of AS9102 (FAI) would be beneficial. Able to generate CMM Arm programs would be beneficial. To find out more about the position, please apply and we will be in touch to discuss the role in more detail. Our client is a well-established manufacturing and engineering provider which delivers a high standard product to all its client base, in both the UK and overseas. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
Apr 18, 2024
Full time
Quality Inspector Location Sittingbourne, Kent Salary £26,000 - £29,000 per annum depending on experience Hours Monday to Friday Benefits Company events, pension, onsite parking, early finish on Fridays & 185 hours of annual leave per year Do you have a good understanding of ISO9001:2105 QMS requirements? Do you have experience in welding inspection protocols? We have an opportunity in Sittingbourne for a Quality Inspector to work for one of our clients. In this role, you will be working full-time, Monday to Friday, for a well-established and respected company that delivers high-quality products for its specialist client base. Responsibilities for the role of Quality Inspector Conduct inspections on engineering drawings, utilising gauges and relevant inspection equipment for dimensional and visual assessments. Conduct material inspections as part of the quality control process. Oversee the inspection of all received parts from suppliers, employing both manual and digital measuring devices. Take charge of identifying and investigating non-conforming parts, initiating the quarantine of items, generating non-conformance reports, and collaborating with suppliers for corrective actions. Execute and validate First Article Inspection (FAI) data per AS9102 requirements. Facilitate product release and acceptance within the company's ERP system. Engage in document reviews, analysis, inspection, and archiving in compliance with EPS requirements before the release of finished goods. Participate in forecasting and planning activities based on business requirements. Play an active role in enhancing the company's Quality Management System (QMS) through continuous improvement Skills and Experience: Good understanding of ISO9001:2015 QMS requirements and customer focus. Strong communication skills both verbal and written, with good interpersonal skills. Computer literacy, proficient in the use of Microsoft Word, Excel, Access and Outlook. Self-motivated and able to prioritise and resolve competing priorities and workloads. Knowledge of and ability to interpret engineering drawings and tolerances. Experience using a range of measuring instruments. Basic knowledge of welding inspection. Able to adapt to the ever-changing technology and willingness to learn new skills. Hands-on approach to problem-solving and attention to detail. Excellent team working skills. Previous experience working in in a Quality role would be beneficial. Understanding of AS9102 (FAI) would be beneficial. Able to generate CMM Arm programs would be beneficial. To find out more about the position, please apply and we will be in touch to discuss the role in more detail. Our client is a well-established manufacturing and engineering provider which delivers a high standard product to all its client base, in both the UK and overseas. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
Role synopsis: An integral part of bp's transition from an International Oil Company to an Integrated Energy Company is the entry of electrical vehicle (EV) charging markets in key countries e.g. Germany, UK, US and China. Our mission is to create the fastest and most convenient charger network in the markets we operate in. This is an opportunity to join a business with an envious position in a fast-growing business, and ultimately help enable more people to transition to electric vehicles. You will not just be part of the biggest change in the automotive industry for a century - you will be at the forefront of it as we shape the EV charging market in key regions. The Site Electrical Leader / Electrical Duty Holder role plays a key part in the EV roll out and operations in the UK by ensuring compliance of the network and managing the interface with IDNOs, ICPs and EPC Contractors. You will be at the fore front as the main point of contact for DNOs/DSOs, IDNOs and ICPs liaison and network issues. Success is contributing to the fast-paced role out of charging solutions, through quality design solutions whilst facing the challenges of complex brownfield and greenfield sites. Key accountabilities: Electrical Duty Holder for entire BP Pulse LV and HV electrical distribution network in the UK Responsible for all areas of site electrical compliance and electrical site infrastructure up to 33kV Ownership of Electrical Standards, Safety Rules and Operational Practices and Procedures Promote a safety conscious working environment where all engineering personnel adopt safe working practices Performance Management of the IDNOs, ICPs and EPC Contractors, conducting monthly oversight and management meetings to ensure all targets are met Development and ownership of BP Pulse Power Resilience Risk Register, reducing power-related disruption Lead RCAs solving complex electrical issues and establishing preventative measures Maintain regular contact with the O&M Team to ensure maintenance issues are being dealt with effectively Acting as Authorising Officer and Network Control Manager Prepare and/or approve all switching schedules, outages/shutdowns and sign-off of Permits to Work and energisation certificates Provide technical guidance and decision making on development and power needs, improving understanding of the associated risk across the BP Pulse network in the UK Support the UK Engineering Team Leader and Global Substation Manger creating a standard design model that can be deployed and quality detailed design produced for the installation of the chosen solutions Support all teams during site appraisal, network planning, procurement, installation, construction and commissioning/go-live Alert the Execution Manager and UK Engineering Team Leader on any identified risks within his / her responsibility Capture Lessons Learned through engineering and installation delivery and ensure Continuous Improvement throughout our EV deployments Education: Must have Electrical HNC or equivalent Preferably a university degree in Engineering Essential experience: 5+ years of Senior Authorised Person (SAP) experience Strong technical knowledge of LV, HV and EHV systems, standards, regulations, constraints, and requirements Experience working for IDNOs, DSOs, TSO, ICPs or Power System Consultancies Strong interpersonal skills with the ability to build relationships with external parties Good organisational and analytical skills A strong track record in project delivery or in supporting complex Project management Fluent in English Desirable Experience Chartered Engineer or equivalent (working towards with imminent application would be considered) Experience leading multi-cultural teams Demonstrated ability to integrate engineering on projects covering different countries and use cases Engineering rollout in the EV field 8-15 years' experience in large scale engineering projects Broad professional experience in engineering and project management delivery Sound knowledge of EV charging technology and thorough understanding of the operation and structures of charging networks and how they are integrated. Direct experience of industry standards in the EV space. Agile Project management. Multilingual Related Jobs Contract 15 Jan 2024 Sr Software Engineer Vacancy Overview Senior Software Engineer Airswift is an international Dear all, Our client seeks an experienced Senior Electrical Engineer to join Position: Civil and Mechanical Inspector, Solar Location: On construction site Don't see a job for you? Register for our candidate portal Sign in or register for Airswift Digital to stay updated with recommended jobs.
Apr 17, 2024
Full time
Role synopsis: An integral part of bp's transition from an International Oil Company to an Integrated Energy Company is the entry of electrical vehicle (EV) charging markets in key countries e.g. Germany, UK, US and China. Our mission is to create the fastest and most convenient charger network in the markets we operate in. This is an opportunity to join a business with an envious position in a fast-growing business, and ultimately help enable more people to transition to electric vehicles. You will not just be part of the biggest change in the automotive industry for a century - you will be at the forefront of it as we shape the EV charging market in key regions. The Site Electrical Leader / Electrical Duty Holder role plays a key part in the EV roll out and operations in the UK by ensuring compliance of the network and managing the interface with IDNOs, ICPs and EPC Contractors. You will be at the fore front as the main point of contact for DNOs/DSOs, IDNOs and ICPs liaison and network issues. Success is contributing to the fast-paced role out of charging solutions, through quality design solutions whilst facing the challenges of complex brownfield and greenfield sites. Key accountabilities: Electrical Duty Holder for entire BP Pulse LV and HV electrical distribution network in the UK Responsible for all areas of site electrical compliance and electrical site infrastructure up to 33kV Ownership of Electrical Standards, Safety Rules and Operational Practices and Procedures Promote a safety conscious working environment where all engineering personnel adopt safe working practices Performance Management of the IDNOs, ICPs and EPC Contractors, conducting monthly oversight and management meetings to ensure all targets are met Development and ownership of BP Pulse Power Resilience Risk Register, reducing power-related disruption Lead RCAs solving complex electrical issues and establishing preventative measures Maintain regular contact with the O&M Team to ensure maintenance issues are being dealt with effectively Acting as Authorising Officer and Network Control Manager Prepare and/or approve all switching schedules, outages/shutdowns and sign-off of Permits to Work and energisation certificates Provide technical guidance and decision making on development and power needs, improving understanding of the associated risk across the BP Pulse network in the UK Support the UK Engineering Team Leader and Global Substation Manger creating a standard design model that can be deployed and quality detailed design produced for the installation of the chosen solutions Support all teams during site appraisal, network planning, procurement, installation, construction and commissioning/go-live Alert the Execution Manager and UK Engineering Team Leader on any identified risks within his / her responsibility Capture Lessons Learned through engineering and installation delivery and ensure Continuous Improvement throughout our EV deployments Education: Must have Electrical HNC or equivalent Preferably a university degree in Engineering Essential experience: 5+ years of Senior Authorised Person (SAP) experience Strong technical knowledge of LV, HV and EHV systems, standards, regulations, constraints, and requirements Experience working for IDNOs, DSOs, TSO, ICPs or Power System Consultancies Strong interpersonal skills with the ability to build relationships with external parties Good organisational and analytical skills A strong track record in project delivery or in supporting complex Project management Fluent in English Desirable Experience Chartered Engineer or equivalent (working towards with imminent application would be considered) Experience leading multi-cultural teams Demonstrated ability to integrate engineering on projects covering different countries and use cases Engineering rollout in the EV field 8-15 years' experience in large scale engineering projects Broad professional experience in engineering and project management delivery Sound knowledge of EV charging technology and thorough understanding of the operation and structures of charging networks and how they are integrated. Direct experience of industry standards in the EV space. Agile Project management. Multilingual Related Jobs Contract 15 Jan 2024 Sr Software Engineer Vacancy Overview Senior Software Engineer Airswift is an international Dear all, Our client seeks an experienced Senior Electrical Engineer to join Position: Civil and Mechanical Inspector, Solar Location: On construction site Don't see a job for you? Register for our candidate portal Sign in or register for Airswift Digital to stay updated with recommended jobs.
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 17, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 16, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 16, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
GCS Compliance Ltd are a specialist independent auditing company providing quality safety, expert technical, compliance management consultancy services and professional training to local authorities, housing associations and landlords and owners of commercial properties and buildings. We specialise in gas safety, electrical testing, water hygiene, energy performance certification and lift maintenance services. We are looking for an Administrator to join our team. The role is part time offering a minimum of 16 hours per week and flexible working arrangements. The role will be primarily based from our office in Medway. The primary purpose of this role is to assist in the effective and logistical planning of our quality control auditors to ensure audits are completed to a high standard in a timely fashion to meet and exceed our contractual obligations. Main Duties: Undertake the timely and consistent delivery of audit processing Assist with the audit selection and planning to ensure audit delivery is maintained Assist with the relationship and suitable return of any audit related reports Assist with the completion of any completed audit related reports Be supportive of the requirements of the Audit compliance Officer, and their reasonable needs Supporting the Audit compliance Officer with the Preparation of Monthly Audit Reports Provide support to the Audit compliance Officer with and day to day contact from both Inspectors, Contract Teams and customers Act and deliver upon any reasonable administration requests by a Service Manager and/or Audit compliance Officer Be available to assist colleagues to meet the reasonable needs of the business in times of absence and/or annual leave Job Related Professional Skills: Demonstrates high quality standards and attention to detail Demonstrates high customer service standards Demonstrates excellent time management skills and ability to work able to meet tough deadlines Demonstrates ability to works as part of a team or independently Demonstrates effective communication skills Demonstrates good IT skills and a command of all key MS Office products Has experience with creating mail mergers Geographical knowledge and the ability to use Google Maps for route planning Confident telephone manner Adaptable to meet client requirements
Apr 16, 2024
Full time
GCS Compliance Ltd are a specialist independent auditing company providing quality safety, expert technical, compliance management consultancy services and professional training to local authorities, housing associations and landlords and owners of commercial properties and buildings. We specialise in gas safety, electrical testing, water hygiene, energy performance certification and lift maintenance services. We are looking for an Administrator to join our team. The role is part time offering a minimum of 16 hours per week and flexible working arrangements. The role will be primarily based from our office in Medway. The primary purpose of this role is to assist in the effective and logistical planning of our quality control auditors to ensure audits are completed to a high standard in a timely fashion to meet and exceed our contractual obligations. Main Duties: Undertake the timely and consistent delivery of audit processing Assist with the audit selection and planning to ensure audit delivery is maintained Assist with the relationship and suitable return of any audit related reports Assist with the completion of any completed audit related reports Be supportive of the requirements of the Audit compliance Officer, and their reasonable needs Supporting the Audit compliance Officer with the Preparation of Monthly Audit Reports Provide support to the Audit compliance Officer with and day to day contact from both Inspectors, Contract Teams and customers Act and deliver upon any reasonable administration requests by a Service Manager and/or Audit compliance Officer Be available to assist colleagues to meet the reasonable needs of the business in times of absence and/or annual leave Job Related Professional Skills: Demonstrates high quality standards and attention to detail Demonstrates high customer service standards Demonstrates excellent time management skills and ability to work able to meet tough deadlines Demonstrates ability to works as part of a team or independently Demonstrates effective communication skills Demonstrates good IT skills and a command of all key MS Office products Has experience with creating mail mergers Geographical knowledge and the ability to use Google Maps for route planning Confident telephone manner Adaptable to meet client requirements
Mechanical Engineering Quality inspector Location: Drayton, Abingdon, Oxfordshire OX14 4EZ Hours: 37hr week, Mon-Thurs 8.00 4.30 Fri 8.00-1.00 Overtime often available Wage: Dependant on skill and experience to £38k Salary Duration : Permanent Job description: We are looking for an experienced, dynamic and qualified In-process Inspector to take control of all aspects of quality control from material supply through thorough checking off in-process inspection, to final delivery along with a disciplined and hands on approach to dimensional inspection. The role will involve customer and supplier liaison, management of NCR s & development of corrective/preventative actions in line with ISO 9001 standards and recommended actions for development and improvement of our systems and procedures. The key responsibilities include: In-Process inspection (During Manufacture) Use of Programmable and Manual CMM inspection Upkeep, Maintenance and calibration of Metrology gauges and equipment to ISO 9001 Overseeing goods in/out inspection Raising and investigating NCRs with implementation of corrective/preventive measures Presentation of KPI statistics for monthly review Maintenance of ISO 9001 accreditation as it relates to the Production and inspection Key skills and experience: Ideally you will be an experienced CNC Machinist/programmer with an Inspection background. You will be able to demonstrate and pass on your skills and experience of quality inspection. You will be fully familiar with, and have experience of working within an ISO 9001 environment. You will be able to work well in a team environment and have the necessary people skills to develop and improve the quality culture of the business, having confidence and a discerning judgment on when to raise issues, improvements. You will have good communication skills both internally and to outside agencies by telephone/email etc Reporting to the Managing Director you will be supporting the production team striving for 100% quality. Please apply to: Sheena Arnold Machining Technology Milton Road, Drayton OX144EZ Tel: ext 204 Email: Web:
Apr 16, 2024
Full time
Mechanical Engineering Quality inspector Location: Drayton, Abingdon, Oxfordshire OX14 4EZ Hours: 37hr week, Mon-Thurs 8.00 4.30 Fri 8.00-1.00 Overtime often available Wage: Dependant on skill and experience to £38k Salary Duration : Permanent Job description: We are looking for an experienced, dynamic and qualified In-process Inspector to take control of all aspects of quality control from material supply through thorough checking off in-process inspection, to final delivery along with a disciplined and hands on approach to dimensional inspection. The role will involve customer and supplier liaison, management of NCR s & development of corrective/preventative actions in line with ISO 9001 standards and recommended actions for development and improvement of our systems and procedures. The key responsibilities include: In-Process inspection (During Manufacture) Use of Programmable and Manual CMM inspection Upkeep, Maintenance and calibration of Metrology gauges and equipment to ISO 9001 Overseeing goods in/out inspection Raising and investigating NCRs with implementation of corrective/preventive measures Presentation of KPI statistics for monthly review Maintenance of ISO 9001 accreditation as it relates to the Production and inspection Key skills and experience: Ideally you will be an experienced CNC Machinist/programmer with an Inspection background. You will be able to demonstrate and pass on your skills and experience of quality inspection. You will be fully familiar with, and have experience of working within an ISO 9001 environment. You will be able to work well in a team environment and have the necessary people skills to develop and improve the quality culture of the business, having confidence and a discerning judgment on when to raise issues, improvements. You will have good communication skills both internally and to outside agencies by telephone/email etc Reporting to the Managing Director you will be supporting the production team striving for 100% quality. Please apply to: Sheena Arnold Machining Technology Milton Road, Drayton OX144EZ Tel: ext 204 Email: Web:
GCS Compliance Ltd are a specialist independent auditing company providing quality safety, expert technical, compliance management consultancy services and professional training to local authorities, housing associations and landlords and owners of commercial properties and buildings. We specialise in gas safety, electrical testing, water hygiene, energy performance certification and lift maintenance services. We are looking for an Administrator to join our team. The role is part time offering a minimum of 16 hours per week and flexible working arrangements. The role will be primarily based from our office in Medway. The primary purpose of this role is to assist in the effective and logistical planning of our quality control auditors to ensure audits are completed to a high standard in a timely fashion to meet and exceed our contractual obligations. Main Duties: Undertake the timely and consistent delivery of audit processing Assist with the audit selection and planning to ensure audit delivery is maintained Assist with the relationship and suitable return of any audit related reports Assist with the completion of any completed audit related reports Be supportive of the requirements of the Audit compliance Officer, and their reasonable needs Supporting the Audit compliance Officer with the Preparation of Monthly Audit Reports Provide support to the Audit compliance Officer with and day to day contact from both Inspectors, Contract Teams and customers Act and deliver upon any reasonable administration requests by a Service Manager and/or Audit compliance Officer Be available to assist colleagues to meet the reasonable needs of the business in times of absence and/or annual leave Job Related Professional Skills: Demonstrates high quality standards and attention to detail Demonstrates high customer service standards Demonstrates excellent time management skills and ability to work able to meet tough deadlines Demonstrates ability to works as part of a team or independently Demonstrates effective communication skills Demonstrates good IT skills and a command of all key MS Office products Has experience with creating mail mergers Geographical knowledge and the ability to use Google Maps for route planning Confident telephone manner Adaptable to meet client requirements
Apr 16, 2024
Full time
GCS Compliance Ltd are a specialist independent auditing company providing quality safety, expert technical, compliance management consultancy services and professional training to local authorities, housing associations and landlords and owners of commercial properties and buildings. We specialise in gas safety, electrical testing, water hygiene, energy performance certification and lift maintenance services. We are looking for an Administrator to join our team. The role is part time offering a minimum of 16 hours per week and flexible working arrangements. The role will be primarily based from our office in Medway. The primary purpose of this role is to assist in the effective and logistical planning of our quality control auditors to ensure audits are completed to a high standard in a timely fashion to meet and exceed our contractual obligations. Main Duties: Undertake the timely and consistent delivery of audit processing Assist with the audit selection and planning to ensure audit delivery is maintained Assist with the relationship and suitable return of any audit related reports Assist with the completion of any completed audit related reports Be supportive of the requirements of the Audit compliance Officer, and their reasonable needs Supporting the Audit compliance Officer with the Preparation of Monthly Audit Reports Provide support to the Audit compliance Officer with and day to day contact from both Inspectors, Contract Teams and customers Act and deliver upon any reasonable administration requests by a Service Manager and/or Audit compliance Officer Be available to assist colleagues to meet the reasonable needs of the business in times of absence and/or annual leave Job Related Professional Skills: Demonstrates high quality standards and attention to detail Demonstrates high customer service standards Demonstrates excellent time management skills and ability to work able to meet tough deadlines Demonstrates ability to works as part of a team or independently Demonstrates effective communication skills Demonstrates good IT skills and a command of all key MS Office products Has experience with creating mail mergers Geographical knowledge and the ability to use Google Maps for route planning Confident telephone manner Adaptable to meet client requirements
Job Title: Electrical Inspector Location: Bolton Contract:12 Months-Fully onsite Salary: £DOE - We are booking interviews next week! Please call or email for a slot Key Qualifications: Accredited Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, Vocational G or H Units with Additional Education, City & Guilds Parts 1, 2 & 3, Vocational TR23 Units with Additional Education, ONC or City & Guilds Parts 1, 2 & 3, Vocational NVQ3 with Additional Education, BTEC ONC/HNC Join Our Team as an Electrical Inspector and drive Electrical Inspection to New Heights! Are you a meticulous Electrical Inspector with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier quality standards in a well-established engineering organization? Look no further! We invite you to join our team in Bolton and be a key driver of engineering excellence. About Us: As a distinguished multinational company specialising in the design, development, and production of missile systems Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Electrical Inspector to contribute to our continued success. The Role: So, what will you be doing as an Electrical Inspector? Accountable for ensuring the quality of deliverable hardware through comprehensive oversight. Conduct product certification in adherence to established processes and protocols. Thoroughly inspect assemblies, including verifying electrical connections and assessing surface finish. Detect and address any physical damage or non-conformities during inspections. Perform intermediate checks for activities not covered by Product Certification. Supervise operators participating in the Product Certification Scheme. Complete and certify all manufacturing paperwork accurately. Manage non-conforming items and maintain relevant documentation and reports. Generate necessary inspection and quality control documentation. Utilize specialized inspection tools and equipment with care. Uphold product certification and approval through routine audits. Ensure compliance with all applicable manufacturing procedures. Meet designated inspection timelines consistently. Demonstrate a versatile skill set applicable to various tasks. Uphold high workmanship standards and product quality. Promote and maintain a safe and orderly work environment. Contribute actively to process improvement initiatives. Hold formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21or HNC. Possess extensive experience as a skilled worker. Preferably certified or trained in IPC 610 & IPC 620 standards, with additional training in manual handling and ESD. Must not have colour blindness. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Electrical Inspector this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Electrical Inspector, hit that apply button now! How to Apply: Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in Bolton PLEASE NOTE BPSS Or Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Apr 16, 2024
Full time
Job Title: Electrical Inspector Location: Bolton Contract:12 Months-Fully onsite Salary: £DOE - We are booking interviews next week! Please call or email for a slot Key Qualifications: Accredited Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, Vocational G or H Units with Additional Education, City & Guilds Parts 1, 2 & 3, Vocational TR23 Units with Additional Education, ONC or City & Guilds Parts 1, 2 & 3, Vocational NVQ3 with Additional Education, BTEC ONC/HNC Join Our Team as an Electrical Inspector and drive Electrical Inspection to New Heights! Are you a meticulous Electrical Inspector with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier quality standards in a well-established engineering organization? Look no further! We invite you to join our team in Bolton and be a key driver of engineering excellence. About Us: As a distinguished multinational company specialising in the design, development, and production of missile systems Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Electrical Inspector to contribute to our continued success. The Role: So, what will you be doing as an Electrical Inspector? Accountable for ensuring the quality of deliverable hardware through comprehensive oversight. Conduct product certification in adherence to established processes and protocols. Thoroughly inspect assemblies, including verifying electrical connections and assessing surface finish. Detect and address any physical damage or non-conformities during inspections. Perform intermediate checks for activities not covered by Product Certification. Supervise operators participating in the Product Certification Scheme. Complete and certify all manufacturing paperwork accurately. Manage non-conforming items and maintain relevant documentation and reports. Generate necessary inspection and quality control documentation. Utilize specialized inspection tools and equipment with care. Uphold product certification and approval through routine audits. Ensure compliance with all applicable manufacturing procedures. Meet designated inspection timelines consistently. Demonstrate a versatile skill set applicable to various tasks. Uphold high workmanship standards and product quality. Promote and maintain a safe and orderly work environment. Contribute actively to process improvement initiatives. Hold formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21or HNC. Possess extensive experience as a skilled worker. Preferably certified or trained in IPC 610 & IPC 620 standards, with additional training in manual handling and ESD. Must not have colour blindness. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Electrical Inspector this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Electrical Inspector, hit that apply button now! How to Apply: Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in Bolton PLEASE NOTE BPSS Or Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Elevation Recruitment Group are currently partnered with a leading business within the engineering industry who are looking to recruit an experienced Quality Assistant/Administrator to support on a £-multi-million project. Reporting into the QA Manager, this role will support on all compliance and documentation for the project. The business are looking for someone from an engineering background, ideally with experience within a highly regulated industry. Duties & Responsibilities: Generate Document & Certification packs in line with customer or specification requirements Ensure that ITPs, Quality Plans etc reflect the correct inspection points and that any procedures referenced are current and applicable. Ensure that all certification and document packs are correctly archived and can be readily accessed Maintain data on the database, including generation of certification packs from the system. Ensure incoming product certification conforms with purchase and Specification requirements. Liaise with Third Party Inspectors and Customers and control personnel on site, about documentation acceptance and sign off. Ensure certification and Documentation packs are made available to customers utilising web-based portals and electronic document sharing software where applicable Record and track customer concessions within the document management system. General administration duties I'm keen to speak to Quality Assistant/Administrators with the following skillset: Able to work to tight deadlines, and focus on detail to ensure high levels of accuracy Ability to prioritise work-load and focus on key issues Able to escalate problems and issues quickly and constructively and solve problems Team working skills Able to work under pressure and deliver results to a defined deadline Logical and analytical, Can-do attitude, self-motivated
Apr 15, 2024
Full time
Elevation Recruitment Group are currently partnered with a leading business within the engineering industry who are looking to recruit an experienced Quality Assistant/Administrator to support on a £-multi-million project. Reporting into the QA Manager, this role will support on all compliance and documentation for the project. The business are looking for someone from an engineering background, ideally with experience within a highly regulated industry. Duties & Responsibilities: Generate Document & Certification packs in line with customer or specification requirements Ensure that ITPs, Quality Plans etc reflect the correct inspection points and that any procedures referenced are current and applicable. Ensure that all certification and document packs are correctly archived and can be readily accessed Maintain data on the database, including generation of certification packs from the system. Ensure incoming product certification conforms with purchase and Specification requirements. Liaise with Third Party Inspectors and Customers and control personnel on site, about documentation acceptance and sign off. Ensure certification and Documentation packs are made available to customers utilising web-based portals and electronic document sharing software where applicable Record and track customer concessions within the document management system. General administration duties I'm keen to speak to Quality Assistant/Administrators with the following skillset: Able to work to tight deadlines, and focus on detail to ensure high levels of accuracy Ability to prioritise work-load and focus on key issues Able to escalate problems and issues quickly and constructively and solve problems Team working skills Able to work under pressure and deliver results to a defined deadline Logical and analytical, Can-do attitude, self-motivated
Job Title: Logistics Assistant Location: Calne, Wiltshire Job Type: Permanent, fulltime Salary: £25-26K DOE My client is looking for a Logistics Assistant to join their team based in Calne. The role will be a varied one, which will involve the coordination of paperwork for the products and managing the stock control of stock products on site. The main duties will be: Coordinating with all relevant departments on a daily basis including Production, Inspection and Despatch with regards the paperwork of products. Work to ISO9001 / ISO14001 accreditation standards when using the quality systems and documentation. Book all work order components into the inhouse computer system soon as the work has been completed by the Inspector. To produce accurate labels for each job within the Inspection To seal and label all good components accurately ready for Pack parts, label, and put into correct boxes/pallets in preparation for despatch. Invoice and despatch all orders due each Manage stock control of resources, g. boxes, bags, pallets. Ensure parts are manufactured in line with production plan and quality standards. The working hours for the role are Monday-Wednesday 07:00-17:00 & Thursday 07:00-16:30 (4-day week) Skills/Experience required: The role will suit someone with strong Administration skills, and previous experience within a warehouse/packing position, ideally within manufacturing. Benefits that come with the role are: 25 days holiday plus B/HPension 6%Life assurance
Apr 15, 2024
Full time
Job Title: Logistics Assistant Location: Calne, Wiltshire Job Type: Permanent, fulltime Salary: £25-26K DOE My client is looking for a Logistics Assistant to join their team based in Calne. The role will be a varied one, which will involve the coordination of paperwork for the products and managing the stock control of stock products on site. The main duties will be: Coordinating with all relevant departments on a daily basis including Production, Inspection and Despatch with regards the paperwork of products. Work to ISO9001 / ISO14001 accreditation standards when using the quality systems and documentation. Book all work order components into the inhouse computer system soon as the work has been completed by the Inspector. To produce accurate labels for each job within the Inspection To seal and label all good components accurately ready for Pack parts, label, and put into correct boxes/pallets in preparation for despatch. Invoice and despatch all orders due each Manage stock control of resources, g. boxes, bags, pallets. Ensure parts are manufactured in line with production plan and quality standards. The working hours for the role are Monday-Wednesday 07:00-17:00 & Thursday 07:00-16:30 (4-day week) Skills/Experience required: The role will suit someone with strong Administration skills, and previous experience within a warehouse/packing position, ideally within manufacturing. Benefits that come with the role are: 25 days holiday plus B/HPension 6%Life assurance
My client is looking for a Goods Inwards Inspector to join them on an initial 6 - 12-month basis. The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: 23.24 per hour via Umbrella Location: Stevenage Contract: 6 - 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. ESD training. SAP literate is desirable. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Apr 15, 2024
Contractor
My client is looking for a Goods Inwards Inspector to join them on an initial 6 - 12-month basis. The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: 23.24 per hour via Umbrella Location: Stevenage Contract: 6 - 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. ESD training. SAP literate is desirable. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Manufacturing Electrical Inspector Salary: up to 39,123 Location: Greater Manchester Bonus of up to 2,500 per year based on company performance Contributory pension of up to 14% Up to 15 days flexi leave 25 days holiday + holiday purchase Our enhanced parental leave offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Subsidised meals, free car parking at Bolton site Excellent career progression and development opportunities The opportunity: We're on the lookout for an Electrical Inspector to join our Manufacturing Team. This is an exciting moment to become part of our team, especially as we operate from our cutting-edge Bolton Manufacturing facility. Your primary responsibility will be to ensure the quality of the deliverable hardware by overseeing all necessary elements to achieve and maintain that standard. Your responsibilities will include: Product Certification: Certifying the product according to the established certification Assembly Examination: Thoroughly examining the assembly for correctness, including verifying all types of electrical connections. Finish Inspection: Inspecting all parts for proper finishing, detecting any faulty finishing, painting defects, or surface deterioration. Damage Assessment: Checking for physical damage to ensure the integrity of the product. Intermediate Inspection: Conducting intermediate inspection checks alongside product certification activities. Documentation: Checking, completing, and certifying all paperwork associated with the manufacturing data pack. Defect Control: Controlling defect items by segregating them from good products and raising defect reports as necessary. Record Maintenance: Generating and maintaining relevant data records, defect reports, inspection documentation, and history sheets. Tool Usage: Carefully using and maintaining specialised inspection tools required for the role. Audits: Participating in regular audits to maintain product certification and approval. Compliance: Ensuring compliance with all relevant procedures applicable to the manufacturing process. Timelines: Meeting inspection times to ensure efficiency in the production process. Quality Standards: Upholding the highest workmanship standards and product quality throughout the inspection process. Safety: Maintaining a safe working environment for yourself and others. Housekeeping: Adhering to a good housekeeping policy to ensure a clean and organised work Here's what we're looking for from you: Formal Technical Education: A formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21 is a mandatory requirement. Experience: Proven and demonstrable experience as a skilled individual in the field. Team Player: Ability to work effectively as part of a team, demonstrating customer focus and a collaborative nature. Planning and Organisation: Strong planning and organising skills to ensure efficient workflow and task completion. Proactive Problem-Solving: Demonstrated proactive approach to problem-solving and a commitment to working collaboratively to achieve business objectives. Versatility: Possession of a versatile skill base with the capability to apply these skills across a range of tasks as required. Continues Improvement: Willingness to contribute to an environment of continuous process improvement, suggesting and implementing enhancements where possible. IPC 610 Certification: Preferred certification or training in IPC 610 standards, demonstrating proficiency in electronics assembly and inspection processes. Due to the nature of the business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above.
Apr 15, 2024
Full time
Manufacturing Electrical Inspector Salary: up to 39,123 Location: Greater Manchester Bonus of up to 2,500 per year based on company performance Contributory pension of up to 14% Up to 15 days flexi leave 25 days holiday + holiday purchase Our enhanced parental leave offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Subsidised meals, free car parking at Bolton site Excellent career progression and development opportunities The opportunity: We're on the lookout for an Electrical Inspector to join our Manufacturing Team. This is an exciting moment to become part of our team, especially as we operate from our cutting-edge Bolton Manufacturing facility. Your primary responsibility will be to ensure the quality of the deliverable hardware by overseeing all necessary elements to achieve and maintain that standard. Your responsibilities will include: Product Certification: Certifying the product according to the established certification Assembly Examination: Thoroughly examining the assembly for correctness, including verifying all types of electrical connections. Finish Inspection: Inspecting all parts for proper finishing, detecting any faulty finishing, painting defects, or surface deterioration. Damage Assessment: Checking for physical damage to ensure the integrity of the product. Intermediate Inspection: Conducting intermediate inspection checks alongside product certification activities. Documentation: Checking, completing, and certifying all paperwork associated with the manufacturing data pack. Defect Control: Controlling defect items by segregating them from good products and raising defect reports as necessary. Record Maintenance: Generating and maintaining relevant data records, defect reports, inspection documentation, and history sheets. Tool Usage: Carefully using and maintaining specialised inspection tools required for the role. Audits: Participating in regular audits to maintain product certification and approval. Compliance: Ensuring compliance with all relevant procedures applicable to the manufacturing process. Timelines: Meeting inspection times to ensure efficiency in the production process. Quality Standards: Upholding the highest workmanship standards and product quality throughout the inspection process. Safety: Maintaining a safe working environment for yourself and others. Housekeeping: Adhering to a good housekeeping policy to ensure a clean and organised work Here's what we're looking for from you: Formal Technical Education: A formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21 is a mandatory requirement. Experience: Proven and demonstrable experience as a skilled individual in the field. Team Player: Ability to work effectively as part of a team, demonstrating customer focus and a collaborative nature. Planning and Organisation: Strong planning and organising skills to ensure efficient workflow and task completion. Proactive Problem-Solving: Demonstrated proactive approach to problem-solving and a commitment to working collaboratively to achieve business objectives. Versatility: Possession of a versatile skill base with the capability to apply these skills across a range of tasks as required. Continues Improvement: Willingness to contribute to an environment of continuous process improvement, suggesting and implementing enhancements where possible. IPC 610 Certification: Preferred certification or training in IPC 610 standards, demonstrating proficiency in electronics assembly and inspection processes. Due to the nature of the business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above.
Job Title: Electrical Inspector Location: Bolton Contract:12 Months-Fully onsite Salary: DOE - We are booking interviews next week! Please call or email for a slot Key Qualifications: Accredited Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, Vocational G or H Units with Additional Education, City & Guilds Parts 1, 2 & 3, Vocational TR23 Units with Additional Education, ONC or City & Guilds Parts 1, 2 & 3, Vocational NVQ3 with Additional Education, BTEC ONC/HNC Join Our Team as an Electrical Inspector and drive Electrical Inspection to New Heights! Are you a meticulous Electrical Inspector with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier quality standards in a well-established engineering organization? Look no further! We invite you to join our team in Bolton and be a key driver of engineering excellence. About Us: As a distinguished multinational company specialising in the design, development, and production of missile systems Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Electrical Inspector to contribute to our continued success. The Role: So, what will you be doing as an Electrical Inspector? Accountable for ensuring the quality of deliverable hardware through comprehensive oversight. Conduct product certification in adherence to established processes and protocols. Thoroughly inspect assemblies, including verifying electrical connections and assessing surface finish. Detect and address any physical damage or non-conformities during inspections. Perform intermediate checks for activities not covered by Product Certification. Supervise operators participating in the Product Certification Scheme. Complete and certify all manufacturing paperwork accurately. Manage non-conforming items and maintain relevant documentation and reports. Generate necessary inspection and quality control documentation. Utilize specialized inspection tools and equipment with care. Uphold product certification and approval through routine audits. Ensure compliance with all applicable manufacturing procedures. Meet designated inspection timelines consistently. Demonstrate a versatile skill set applicable to various tasks. Uphold high workmanship standards and product quality. Promote and maintain a safe and orderly work environment. Contribute actively to process improvement initiatives. Hold formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21or HNC. Possess extensive experience as a skilled worker. Preferably certified or trained in IPC 610 & IPC 620 standards, with additional training in manual handling and ESD. Must not have colour blindness. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Electrical Inspector this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Electrical Inspector, hit that apply button now! How to Apply: Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in Bolton PLEASE NOTE BPSS Or Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Apr 15, 2024
Contractor
Job Title: Electrical Inspector Location: Bolton Contract:12 Months-Fully onsite Salary: DOE - We are booking interviews next week! Please call or email for a slot Key Qualifications: Accredited Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, Vocational G or H Units with Additional Education, City & Guilds Parts 1, 2 & 3, Vocational TR23 Units with Additional Education, ONC or City & Guilds Parts 1, 2 & 3, Vocational NVQ3 with Additional Education, BTEC ONC/HNC Join Our Team as an Electrical Inspector and drive Electrical Inspection to New Heights! Are you a meticulous Electrical Inspector with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier quality standards in a well-established engineering organization? Look no further! We invite you to join our team in Bolton and be a key driver of engineering excellence. About Us: As a distinguished multinational company specialising in the design, development, and production of missile systems Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Electrical Inspector to contribute to our continued success. The Role: So, what will you be doing as an Electrical Inspector? Accountable for ensuring the quality of deliverable hardware through comprehensive oversight. Conduct product certification in adherence to established processes and protocols. Thoroughly inspect assemblies, including verifying electrical connections and assessing surface finish. Detect and address any physical damage or non-conformities during inspections. Perform intermediate checks for activities not covered by Product Certification. Supervise operators participating in the Product Certification Scheme. Complete and certify all manufacturing paperwork accurately. Manage non-conforming items and maintain relevant documentation and reports. Generate necessary inspection and quality control documentation. Utilize specialized inspection tools and equipment with care. Uphold product certification and approval through routine audits. Ensure compliance with all applicable manufacturing procedures. Meet designated inspection timelines consistently. Demonstrate a versatile skill set applicable to various tasks. Uphold high workmanship standards and product quality. Promote and maintain a safe and orderly work environment. Contribute actively to process improvement initiatives. Hold formal technical engineering or craft apprenticeship up to NVQ Level 3/TR23/TR21or HNC. Possess extensive experience as a skilled worker. Preferably certified or trained in IPC 610 & IPC 620 standards, with additional training in manual handling and ESD. Must not have colour blindness. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Electrical Inspector this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Electrical Inspector, hit that apply button now! How to Apply: Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in Bolton PLEASE NOTE BPSS Or Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
We have a requirement for a Quality Inspector for our manufacturing client in Banbridge Your new company A successful manufacturing company who specialises in the design, supply, and installation of a wide range of prefabricated solutions for clients in Ireand and UK. Due to their increased orders and new contracts they are growing their quality team. Your new role As Quality Inspector you will ensure production units match all approved drawings and specifications and monitor operations to ensure that they meet production standards. You will recommend adjustments to the assembly or production process and inspect, test, measure & report on materials & products being produced. Ensure all quality checks are completed and recorded within the quality management system. Accept or reject finished items. Report inspection and test data. Report and Record Non-Conformances.Any other duties deemed necessary by management. Dayshift hrs Mon - Fri What you'll need to succeed Ideally you will have a minimum of 1 years' experience in a similar role within the M&E or manufacturing industries, excellent knowledge of MS Office. Good mathematical and technical skills. Strong understanding of quality control standards and testing techniques. Good written and Oral communication skills. Excellent knowledge of interpreting engineering drawings. A minimum of 1 years' experience in a similar role within the M&E or manufacturing industries. Excellent knowledge of MS Office. Good mathematical and technical skills. Strong understanding of quality control standards and testing techniques. Good written and Oral communication skills. Excellent knowledge of interpreting engineering drawings. What you'll get in return Competitive salary and good benefits package. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Apr 14, 2024
Full time
We have a requirement for a Quality Inspector for our manufacturing client in Banbridge Your new company A successful manufacturing company who specialises in the design, supply, and installation of a wide range of prefabricated solutions for clients in Ireand and UK. Due to their increased orders and new contracts they are growing their quality team. Your new role As Quality Inspector you will ensure production units match all approved drawings and specifications and monitor operations to ensure that they meet production standards. You will recommend adjustments to the assembly or production process and inspect, test, measure & report on materials & products being produced. Ensure all quality checks are completed and recorded within the quality management system. Accept or reject finished items. Report inspection and test data. Report and Record Non-Conformances.Any other duties deemed necessary by management. Dayshift hrs Mon - Fri What you'll need to succeed Ideally you will have a minimum of 1 years' experience in a similar role within the M&E or manufacturing industries, excellent knowledge of MS Office. Good mathematical and technical skills. Strong understanding of quality control standards and testing techniques. Good written and Oral communication skills. Excellent knowledge of interpreting engineering drawings. A minimum of 1 years' experience in a similar role within the M&E or manufacturing industries. Excellent knowledge of MS Office. Good mathematical and technical skills. Strong understanding of quality control standards and testing techniques. Good written and Oral communication skills. Excellent knowledge of interpreting engineering drawings. What you'll get in return Competitive salary and good benefits package. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Morson are currently recruiting for a Liaison Officer / Administrator for a long term contract in the Wiltshire area coverage Marlborough and Swindon paying £18ph. Overall Purpose ? To manage the relationships between tenants / Clients / production teams and site management to achieve the project objectives. ? Develop strategies with the involvement of Clients / Resident s Associations / residents, ensuring the projects objectives are met. ? Ensure records are maintained and monitored to ensure any complaints or claims are dealt with speedily and satisfactory. Produce reports to ensure that all tenant matters have been addressed until cleared. ? Experience and Knowledge of working on void refurbishment housing modernisations with a clear understanding of the public sector working environment. ? Ensuring our clients / residents satisfaction objectives are met. Looking to continually improve our customer satisfaction ratings. ? Managing the impact of the works on neighbouring residents, occupiers and users, at all times. ? Administrator provides everything from basic levels of admin support, data entry, copying, filing, making appointments, customer survey, dealing with phone calls etc. To more challenging tasks such as monitoring and interrogation of active works report and failure demand, maintaining other important records for all planned operations such as programmes and associated spreadsheets. Expected to be able to think for themselves and be able to look for solutions to problems on their own in the first instance. They should be familiar with IT software, such as Maximo, word, excel and outlook, with the ability to easily format documents to the required standards. The Administrator will also assist the administrative duties of the Supervisors and Sector Manager, as well as the Quantity Surveyor, but will be guided through most tasks. Key Activities Project Delivery TLO ? Ensuring that the needs of residents are taken into account during responsive repairs, kitchen, bathroom, rewire and heating refurbishments, construction and alteration work by conducting pre work survey. ? Communicate with tenants to maintain their awareness of progress. ? Arrange timely access. ? Manage a pro-active process to ensure complaints are recorded and resolved. ? Carry out customer satisfaction surveys. ? Liaise with client bodies and tenant s representative organisations. ? Liaise with 3rd parties, including but not limited to: Neighbours Occupiers / Users Building Control Officer HSE Inspectors Local Authority Environment Agency Statutory Authorities Clerk of Works/ Resident Engineer/ Client Project Manager Group Safety ? Involvement with Site Logistics, including, but not limited to: Health, Safety and Environmental Issues, training and inspections Those that have an impact with resident matters by adopting VINCI ethos of Step Up Safety through everyone s participation. Version 2 January 2017 Administration ? Management (internal and external of site) again to ensure client / resident satisfaction / relationships are maintained. ? Filing. ? Order stationary and maintain stocks ? Answering the phone / dealing with queries. ? Maintain RBS System (Purchase card) ? Materials sheets(For non RBS transactions) (GRN) ? Maintain holiday records for staff and tradesmen on allocated site. ? Create/edit purchase orders (Coins) ? Maintain plant register (Coins) ? On hire/off hire plant (Coins) ? Maintain monthly EPI report. ? Maintain monthly mileage and odomitor return. ? Maintain monthly vehicle return. ? Maintain monthly accident report. ? Maintain site waste management plan Data entry into Footprint . ? Maintain and produce planned schedules, make appointments and maintain associated spreadsheets. ? Maintain and complete weekly reports as required by Supervisor, Sector Manager and Client. ? Weekly operative s hour s allocation & reconciliation ? Timesheet return (Accounts) ? Dealing with new works orders and completions. ? Maintain full IT records as QA requirements. ? Deal with incoming post (external and internal). ? Produce letters / memos / faxes and other written forms of communication. ? Contribute to own self development using the PDP Process. ? Comply with QA procedures. Technical Excellence ? To be aware of and maintain an understanding of the contract documents, appropriate codes of practice, standards and specifications. ? Keep pace with technology and innovative achievements elsewhere. ? To implement the procedures detailed in the project quality plans and Method statements to ensure finished product is compliant with the contract documents. ? To correctly interpret information from drawings and specifications and transfer this to the sites residents when applicable. ? Optimise use of the company IT Systems, to improve efficiency and effectiveness of Project Delivery and bring added value to the business. ? To constantly review existing procedures and processes to put forward suggestions for improvement. ? To have a thorough understanding of safety, health and environmental risks and their controls to be able to implement and monitor the effectiveness of control measures on site. ? Understand and use the knowledge base within the company. Problem Solving ? To anticipate and resolve technical ambiguities/ problems. ? Assess problems and use all the resources available to develop solutions. ? Communicate problems upward and request support when necessary. ? Challenge traditional views and looks for improvements through adopting a new approach. People Management ? Lead and motivate the whole team Make it happen. ? Continually monitor and assess your colleague s performance advise and review good and bad performance regarding client matters. ? Actively encourage and promote a team approach with staff and suppliers to achieve the project objectives. ? Ensure that the skills within the team are effectively utilised for total client / resident satisfaction. ? Delegate responsibility to the lowest appropriate level to ensure that everyone contributes to their fullest. ? Manage relationships between colleagues and residents to ensure that good relationships are maintained. ? Remain emotionally detached from disputes and avoid creating conflict. Communication Skills ? Communicates effectively in both written and spoken form with clients, Residents, colleagues, suppliers and design consultants when applicable. ? Able to communicate with people at different levels. ? Able to chair meetings and write concise meeting minutes. ? Persuade and influence others to gain agreement to and acceptance of ideas. Commercial / Finance Skills ? Understand the financial implications of the methods and sequences of construction that are proposed and planned. ? Be aware commercially aware of the claims culture Knowledge Required ? Experience of working with Local Authority housing tenants & residents in multi-ethnic communities during works programmes. ? Will probably have 5(+) years of the relevant experience, a number of those year being spent in refurbishment projects ? Should have experience working with multidiscipline teams. Qualifications NVQ Level 3 or equivalent Technical Competencies IT Literate Word, Excel & bespoke systems (Coins an advantage) Behavioural Competencies Team Work Acts as a role model in demonstrating very effective team working both within immediate team and wider Vinci team. Plays an effective role as a member of the Vinci Team. Builds Effective Teams: Builds a strong team and encourages direct reports to do likewise reinforcing steps in that direction. Creates strong morale and team spirit. Communication Sharing Information: Communicates with clarity and impact to all levels of employees relating effectively to their needs. Credibility and Trust: Generates trust by openness, two way communications style and consistency. Demonstrates clear understanding of all relevant business issues which enhances credibility. Presence and Influence: Projects presence at Team meetings able to contribute with confidence. Able to deploy a range of influencing skills to deal with barriers/problem situations, drawing on personal experiences to make communications more affective. Please send CVs to (url removed)
Apr 12, 2024
Contractor
Morson are currently recruiting for a Liaison Officer / Administrator for a long term contract in the Wiltshire area coverage Marlborough and Swindon paying £18ph. Overall Purpose ? To manage the relationships between tenants / Clients / production teams and site management to achieve the project objectives. ? Develop strategies with the involvement of Clients / Resident s Associations / residents, ensuring the projects objectives are met. ? Ensure records are maintained and monitored to ensure any complaints or claims are dealt with speedily and satisfactory. Produce reports to ensure that all tenant matters have been addressed until cleared. ? Experience and Knowledge of working on void refurbishment housing modernisations with a clear understanding of the public sector working environment. ? Ensuring our clients / residents satisfaction objectives are met. Looking to continually improve our customer satisfaction ratings. ? Managing the impact of the works on neighbouring residents, occupiers and users, at all times. ? Administrator provides everything from basic levels of admin support, data entry, copying, filing, making appointments, customer survey, dealing with phone calls etc. To more challenging tasks such as monitoring and interrogation of active works report and failure demand, maintaining other important records for all planned operations such as programmes and associated spreadsheets. Expected to be able to think for themselves and be able to look for solutions to problems on their own in the first instance. They should be familiar with IT software, such as Maximo, word, excel and outlook, with the ability to easily format documents to the required standards. The Administrator will also assist the administrative duties of the Supervisors and Sector Manager, as well as the Quantity Surveyor, but will be guided through most tasks. Key Activities Project Delivery TLO ? Ensuring that the needs of residents are taken into account during responsive repairs, kitchen, bathroom, rewire and heating refurbishments, construction and alteration work by conducting pre work survey. ? Communicate with tenants to maintain their awareness of progress. ? Arrange timely access. ? Manage a pro-active process to ensure complaints are recorded and resolved. ? Carry out customer satisfaction surveys. ? Liaise with client bodies and tenant s representative organisations. ? Liaise with 3rd parties, including but not limited to: Neighbours Occupiers / Users Building Control Officer HSE Inspectors Local Authority Environment Agency Statutory Authorities Clerk of Works/ Resident Engineer/ Client Project Manager Group Safety ? Involvement with Site Logistics, including, but not limited to: Health, Safety and Environmental Issues, training and inspections Those that have an impact with resident matters by adopting VINCI ethos of Step Up Safety through everyone s participation. Version 2 January 2017 Administration ? Management (internal and external of site) again to ensure client / resident satisfaction / relationships are maintained. ? Filing. ? Order stationary and maintain stocks ? Answering the phone / dealing with queries. ? Maintain RBS System (Purchase card) ? Materials sheets(For non RBS transactions) (GRN) ? Maintain holiday records for staff and tradesmen on allocated site. ? Create/edit purchase orders (Coins) ? Maintain plant register (Coins) ? On hire/off hire plant (Coins) ? Maintain monthly EPI report. ? Maintain monthly mileage and odomitor return. ? Maintain monthly vehicle return. ? Maintain monthly accident report. ? Maintain site waste management plan Data entry into Footprint . ? Maintain and produce planned schedules, make appointments and maintain associated spreadsheets. ? Maintain and complete weekly reports as required by Supervisor, Sector Manager and Client. ? Weekly operative s hour s allocation & reconciliation ? Timesheet return (Accounts) ? Dealing with new works orders and completions. ? Maintain full IT records as QA requirements. ? Deal with incoming post (external and internal). ? Produce letters / memos / faxes and other written forms of communication. ? Contribute to own self development using the PDP Process. ? Comply with QA procedures. Technical Excellence ? To be aware of and maintain an understanding of the contract documents, appropriate codes of practice, standards and specifications. ? Keep pace with technology and innovative achievements elsewhere. ? To implement the procedures detailed in the project quality plans and Method statements to ensure finished product is compliant with the contract documents. ? To correctly interpret information from drawings and specifications and transfer this to the sites residents when applicable. ? Optimise use of the company IT Systems, to improve efficiency and effectiveness of Project Delivery and bring added value to the business. ? To constantly review existing procedures and processes to put forward suggestions for improvement. ? To have a thorough understanding of safety, health and environmental risks and their controls to be able to implement and monitor the effectiveness of control measures on site. ? Understand and use the knowledge base within the company. Problem Solving ? To anticipate and resolve technical ambiguities/ problems. ? Assess problems and use all the resources available to develop solutions. ? Communicate problems upward and request support when necessary. ? Challenge traditional views and looks for improvements through adopting a new approach. People Management ? Lead and motivate the whole team Make it happen. ? Continually monitor and assess your colleague s performance advise and review good and bad performance regarding client matters. ? Actively encourage and promote a team approach with staff and suppliers to achieve the project objectives. ? Ensure that the skills within the team are effectively utilised for total client / resident satisfaction. ? Delegate responsibility to the lowest appropriate level to ensure that everyone contributes to their fullest. ? Manage relationships between colleagues and residents to ensure that good relationships are maintained. ? Remain emotionally detached from disputes and avoid creating conflict. Communication Skills ? Communicates effectively in both written and spoken form with clients, Residents, colleagues, suppliers and design consultants when applicable. ? Able to communicate with people at different levels. ? Able to chair meetings and write concise meeting minutes. ? Persuade and influence others to gain agreement to and acceptance of ideas. Commercial / Finance Skills ? Understand the financial implications of the methods and sequences of construction that are proposed and planned. ? Be aware commercially aware of the claims culture Knowledge Required ? Experience of working with Local Authority housing tenants & residents in multi-ethnic communities during works programmes. ? Will probably have 5(+) years of the relevant experience, a number of those year being spent in refurbishment projects ? Should have experience working with multidiscipline teams. Qualifications NVQ Level 3 or equivalent Technical Competencies IT Literate Word, Excel & bespoke systems (Coins an advantage) Behavioural Competencies Team Work Acts as a role model in demonstrating very effective team working both within immediate team and wider Vinci team. Plays an effective role as a member of the Vinci Team. Builds Effective Teams: Builds a strong team and encourages direct reports to do likewise reinforcing steps in that direction. Creates strong morale and team spirit. Communication Sharing Information: Communicates with clarity and impact to all levels of employees relating effectively to their needs. Credibility and Trust: Generates trust by openness, two way communications style and consistency. Demonstrates clear understanding of all relevant business issues which enhances credibility. Presence and Influence: Projects presence at Team meetings able to contribute with confidence. Able to deploy a range of influencing skills to deal with barriers/problem situations, drawing on personal experiences to make communications more affective. Please send CVs to (url removed)
Role title: Registered Manager Advert reference number: REQ005870 Close date: To close midnight of 01/05/2024 Salary: £42,403 - £45,441 pa Package: 37 hours per week, Full time, Permanent position Work Base: Sylva Gardens, Children's Residential Home, Llandudno, Conwy, North Wales Job Category/type: Management, Social Work - Children - Qualified Manager details for informal discussion: Fiona Dennison Section Manager Do you want to work to make a positive difference to the lives of young people? We are passionate about working together to make a positive difference to the lives of children and young people to 'have the best life possible' by providing them with a supportive and homely environment that is centred on their individual needs. This will be achieved by putting the child / young person at the centre of all support planning and developing strategies that will enable the child/young person to develop skills in all aspects of their life to give them independence and feeling included in their communities based on what is important to them. As the Registered Manager you will be accountable for leading the management and development of a team within the residential home for children on behalf of the Section Manager and the Service Manager for Integrated Disability Services. One of the key areas of responsibility will be to ensure that you promote, and value 'Active Support', 'Positive Behaviour Support' and the 'Reduction of Restrictive Practices' approaches as a central method of enabling children and young people to engage more in their daily lives; building strong relationships with those surrounding them, developing independent living skills and becoming active members within their communities through delivering high quality care. As the Registered Manager you will demonstrate practical, visible, and compassionate leadership and will be required to: • Manage the delivery of operational responsibilities • Ensure compliance with the standards within the regulated service. • Ensure services are delivered in line with the SSWBA. • Provide workforce and performance information / data. The Registered Manager will also need to demonstrate, role model and empower staff to ensure: • They put the children and young people's needs at the centre of their care and ensure they have voice and control overreaching the outcomes that help them achieve wellbeing. • Children and young people using the service are empowered to become more involved in the design and delivery of the service by putting in place communication systems bespoke to the child / young person that will give the child / young person a clear voice on what is important to them. You will be expected to: • Take responsibility for the overall service delivery whilst ensuring that Sylva Gardens remains fully compliant with the RISCA Regulations 2016. • Work with the Section Manager to implement opportunities for service improvements that deliver efficiencies and sustainability in the delivery of services including gathering feedback from those using the service, their family and friends and other relevant stakeholder's. • Promote a very high standard of personal and professional behaviour in supporting a culture across the service that is authentically warm, genuine, trustworthy, honest, reliable, consistent, and caring. • Provide workplace supervision and guidance for deputy managers and support workers ensuring that they work safely and in a manner that meets the standards that are required of a Social Care Worker within the Social Care Wales Code of Conduct. • Ensuring that the day to day running of the service is delivered in a manner which results in continuous improvement in the service so that 'people are supported to achieve all they can; they are provided with the right support at the right time; they are safe and are protected from abuse' • Build and develop supervision and review processes that consistently reinforce a continuous improvement ethos from all staff who work in Sylva Gardens. What we are looking for from you: • QCF Level 5 diploma in leadership children and young people or equivalent NVQ. • At least 5 years' experience of managing a service regulated by Care Inspectorate Wales for disabled people including services to children who have disabilities. • Sound knowledge of Positive Behaviour as an approach to supporting individuals who have learning disabilities. On appointment the ability to achieve the level 4 qualification in Positive Behaviour Support. • At least 10 years' experience and knowledge of working with disabled people across the lifespan, including those with complex health needs, dual diagnosis and behaviour that challenges. • Previous experience of managing people in relation to all aspects of performance and attendance. Good Knowledge of the Regulation and Inspection of Social Care (Wales) Act 2016. • Sound knowledge of Active Support and Person Centred Planning approaches and ability to embed in team practice. Care Workers can work in other care settings within the county. Settings include those supporting individuals with learning disabilities and /or complex emotional and behavioural needs and full training and support will be provided. This role offers flexible working options for a work life balance. This can include adjusting your working day and hybrid working, ie a balance of office and home working. Manager details for informal discussion: Fiona Dennison Section Manager Role title: Rheolwr Cofrestredig Advert reference number: REQ005870 Close date: I cau hanner nos 01/05/2024 Salary: £42,403 - £45,441 pa Package: 37 awr yr wythnos, Llawn Amser, Parhaol Work Base: Cartref Preswyl Plant Sylva Gardens - Llandudno, Conwy, Gogledd Cymru Job Category/type: Gwaith Cymdeithasol - Plant - Cymwysedig, Rheoli Manylion y rheolwr ar gyfer trafodaeth anffurfiol: Fiona Dennison Rheolwr Adain Ydych chi eisiau gweithio i wneud gwahaniaeth cadarnhaol i fywydau pobl ifanc? Rydym yn angerddol am weithio gyda'n gilydd i wneud gwahaniaeth cadarnhaol i fywydau plant a phobl ifanc i 'fyw'r bywyd gorau posibl' drwy ddarparu amgylchedd diogel a chefnogol iddynt sy'n canolbwyntio ar eu hanghenion unigol. Cyflawnir hyn drwy roi'r plentyn / unigolyn ifanc wrth wraidd yr holl gynllunio gofal a datblygu strategaethau, fydd yn galluogi'r plentyn / unigolyn ifanc i ddatblygu sgiliau ym mhob agwedd o'u bywydau i roi annibyniaeth iddynt fel eu bod yn teimlo'n rhan o'u cymunedau yn seiliedig ar yr hyn sy'n bwysig iddyn nhw. Fel Rheolwr Cofrestredig, byddwch yn gyfrifol am arwain gwaith rheoli a datblygu tîm yn y cartref preswyl i blant ar ran y Rheolwr Adain a Rheolwr Gwasanaeth y Gwasanaethau Anabledd Integredig. Un o'r prif feysydd cyfrifoldeb fydd sicrhau eich bod yn hyrwyddo a gwerthfawrogi 'Cefnogaeth Weithredol', 'Cefnogi Ymddygiad Cadarnhaol' a 'Lleihau Arferion sy'n Cyfyngu' fel dull canolog o alluogi plant a phobl ifanc i ymgysylltu mwy yn eu bywydau bob dydd; meithrin perthnasoedd cryf gyda'r rhai o'u cwmpas, datblygu sgiliau byw'n annibynnol a dod yn aelodau gweithredol o'u cymunedau drwy ddarparu gofal o ansawdd uchel. Fel Rheolwr Cofrestredig byddwch chi'n dangos arweinyddiaeth ymarferol, weledol a thosturiol, a bydd gofyn i chi: • Rheoli'r gwaith o gyflawni cyfrifoldebau gweithredol. • Sicrhau cydymffurfiaeth â'r safonau yn y gwasanaeth a gaiff ei reoleiddio. • Sicrhau bod gwasanaethau'n cael eu darparu yn unol â'r Ddeddf Gwasanaethau Cymdeithasol a Llesiant. • Darparu data/ gwybodaeth am berfformiad a'r gweithlu. Bydd angen i' Rheolwr Cofrestredig ddangos, bod yn fodel rôl a grymuso staff hefyd er mwyn sicrhau: • Eu bod yn rhoi'r plentyn / unigolyn ifanc a'u hanghenion wrth wraidd eu gofal, a sicrhau bod ganddynt lais a rheolaeth dros gyrraedd canlyniadau sy'n eu helpu i gyflawni lles. • Bod plant a phobl ifanc sy'n defnyddio'r gwasanaeth yn cael eu grymuso i gymryd mwy o ran yn y gwaith o ddylunio a darparu'r gwasanaeth drwy roi systemau cyfathrebu ar waith sy'n benodol i'r plentyn / unigolyn ifanc, fydd yn rhoi llais clir iddynt ar yr hyn sy'n bwysig iddynt. Bydd disgwyl i chi: • Cymryd cyfrifoldeb dros ddarparu'r gwasanaeth wrth sicrhau bod Sylva Gardens. yn cydymffurfio'n llawn â Rheoliadau RISCA 2016. • Gweithio gyda'r Rheolwr Adain i weithredu cyfleoedd ar gyfer gwelliannau gwasanaeth sy'n darparu effeithlonrwydd a chynaliadwyedd wrth ddarparu gwasanaethau, gan gynnwys casglu adborth gan rai sy'n defnyddio'r gwasanaeth, eu teulu a'u ffrindiau a budd-ddeiliaid perthnasol eraill. • Hyrwyddo safon ymddygiad personol a phroffesiynol uchel iawn wrth gefnogi diwylliant ar draws y gwasanaeth sy'n wirioneddol gynnes, dilys, llawn ymddiriedaeth, gonest, dibynadwy, cyson a gofalgar. • Darparu goruchwyliaeth ac arweiniad yn y gweithle i Diprwy Reolwyr uwch weithwyr cefnogi a gweithwyr cefnogi a sicrhau eu bod yn gweithio'n ddiogel ac mewn modd sy'n bodloni'r safonau sydd eu hangen gan Weithiwr Gofal Cymdeithasol o fewn Cod Ymddygiad Gofal Cymdeithasol Cymru. . click apply for full job details
Apr 12, 2024
Full time
Role title: Registered Manager Advert reference number: REQ005870 Close date: To close midnight of 01/05/2024 Salary: £42,403 - £45,441 pa Package: 37 hours per week, Full time, Permanent position Work Base: Sylva Gardens, Children's Residential Home, Llandudno, Conwy, North Wales Job Category/type: Management, Social Work - Children - Qualified Manager details for informal discussion: Fiona Dennison Section Manager Do you want to work to make a positive difference to the lives of young people? We are passionate about working together to make a positive difference to the lives of children and young people to 'have the best life possible' by providing them with a supportive and homely environment that is centred on their individual needs. This will be achieved by putting the child / young person at the centre of all support planning and developing strategies that will enable the child/young person to develop skills in all aspects of their life to give them independence and feeling included in their communities based on what is important to them. As the Registered Manager you will be accountable for leading the management and development of a team within the residential home for children on behalf of the Section Manager and the Service Manager for Integrated Disability Services. One of the key areas of responsibility will be to ensure that you promote, and value 'Active Support', 'Positive Behaviour Support' and the 'Reduction of Restrictive Practices' approaches as a central method of enabling children and young people to engage more in their daily lives; building strong relationships with those surrounding them, developing independent living skills and becoming active members within their communities through delivering high quality care. As the Registered Manager you will demonstrate practical, visible, and compassionate leadership and will be required to: • Manage the delivery of operational responsibilities • Ensure compliance with the standards within the regulated service. • Ensure services are delivered in line with the SSWBA. • Provide workforce and performance information / data. The Registered Manager will also need to demonstrate, role model and empower staff to ensure: • They put the children and young people's needs at the centre of their care and ensure they have voice and control overreaching the outcomes that help them achieve wellbeing. • Children and young people using the service are empowered to become more involved in the design and delivery of the service by putting in place communication systems bespoke to the child / young person that will give the child / young person a clear voice on what is important to them. You will be expected to: • Take responsibility for the overall service delivery whilst ensuring that Sylva Gardens remains fully compliant with the RISCA Regulations 2016. • Work with the Section Manager to implement opportunities for service improvements that deliver efficiencies and sustainability in the delivery of services including gathering feedback from those using the service, their family and friends and other relevant stakeholder's. • Promote a very high standard of personal and professional behaviour in supporting a culture across the service that is authentically warm, genuine, trustworthy, honest, reliable, consistent, and caring. • Provide workplace supervision and guidance for deputy managers and support workers ensuring that they work safely and in a manner that meets the standards that are required of a Social Care Worker within the Social Care Wales Code of Conduct. • Ensuring that the day to day running of the service is delivered in a manner which results in continuous improvement in the service so that 'people are supported to achieve all they can; they are provided with the right support at the right time; they are safe and are protected from abuse' • Build and develop supervision and review processes that consistently reinforce a continuous improvement ethos from all staff who work in Sylva Gardens. What we are looking for from you: • QCF Level 5 diploma in leadership children and young people or equivalent NVQ. • At least 5 years' experience of managing a service regulated by Care Inspectorate Wales for disabled people including services to children who have disabilities. • Sound knowledge of Positive Behaviour as an approach to supporting individuals who have learning disabilities. On appointment the ability to achieve the level 4 qualification in Positive Behaviour Support. • At least 10 years' experience and knowledge of working with disabled people across the lifespan, including those with complex health needs, dual diagnosis and behaviour that challenges. • Previous experience of managing people in relation to all aspects of performance and attendance. Good Knowledge of the Regulation and Inspection of Social Care (Wales) Act 2016. • Sound knowledge of Active Support and Person Centred Planning approaches and ability to embed in team practice. Care Workers can work in other care settings within the county. Settings include those supporting individuals with learning disabilities and /or complex emotional and behavioural needs and full training and support will be provided. This role offers flexible working options for a work life balance. This can include adjusting your working day and hybrid working, ie a balance of office and home working. Manager details for informal discussion: Fiona Dennison Section Manager Role title: Rheolwr Cofrestredig Advert reference number: REQ005870 Close date: I cau hanner nos 01/05/2024 Salary: £42,403 - £45,441 pa Package: 37 awr yr wythnos, Llawn Amser, Parhaol Work Base: Cartref Preswyl Plant Sylva Gardens - Llandudno, Conwy, Gogledd Cymru Job Category/type: Gwaith Cymdeithasol - Plant - Cymwysedig, Rheoli Manylion y rheolwr ar gyfer trafodaeth anffurfiol: Fiona Dennison Rheolwr Adain Ydych chi eisiau gweithio i wneud gwahaniaeth cadarnhaol i fywydau pobl ifanc? Rydym yn angerddol am weithio gyda'n gilydd i wneud gwahaniaeth cadarnhaol i fywydau plant a phobl ifanc i 'fyw'r bywyd gorau posibl' drwy ddarparu amgylchedd diogel a chefnogol iddynt sy'n canolbwyntio ar eu hanghenion unigol. Cyflawnir hyn drwy roi'r plentyn / unigolyn ifanc wrth wraidd yr holl gynllunio gofal a datblygu strategaethau, fydd yn galluogi'r plentyn / unigolyn ifanc i ddatblygu sgiliau ym mhob agwedd o'u bywydau i roi annibyniaeth iddynt fel eu bod yn teimlo'n rhan o'u cymunedau yn seiliedig ar yr hyn sy'n bwysig iddyn nhw. Fel Rheolwr Cofrestredig, byddwch yn gyfrifol am arwain gwaith rheoli a datblygu tîm yn y cartref preswyl i blant ar ran y Rheolwr Adain a Rheolwr Gwasanaeth y Gwasanaethau Anabledd Integredig. Un o'r prif feysydd cyfrifoldeb fydd sicrhau eich bod yn hyrwyddo a gwerthfawrogi 'Cefnogaeth Weithredol', 'Cefnogi Ymddygiad Cadarnhaol' a 'Lleihau Arferion sy'n Cyfyngu' fel dull canolog o alluogi plant a phobl ifanc i ymgysylltu mwy yn eu bywydau bob dydd; meithrin perthnasoedd cryf gyda'r rhai o'u cwmpas, datblygu sgiliau byw'n annibynnol a dod yn aelodau gweithredol o'u cymunedau drwy ddarparu gofal o ansawdd uchel. Fel Rheolwr Cofrestredig byddwch chi'n dangos arweinyddiaeth ymarferol, weledol a thosturiol, a bydd gofyn i chi: • Rheoli'r gwaith o gyflawni cyfrifoldebau gweithredol. • Sicrhau cydymffurfiaeth â'r safonau yn y gwasanaeth a gaiff ei reoleiddio. • Sicrhau bod gwasanaethau'n cael eu darparu yn unol â'r Ddeddf Gwasanaethau Cymdeithasol a Llesiant. • Darparu data/ gwybodaeth am berfformiad a'r gweithlu. Bydd angen i' Rheolwr Cofrestredig ddangos, bod yn fodel rôl a grymuso staff hefyd er mwyn sicrhau: • Eu bod yn rhoi'r plentyn / unigolyn ifanc a'u hanghenion wrth wraidd eu gofal, a sicrhau bod ganddynt lais a rheolaeth dros gyrraedd canlyniadau sy'n eu helpu i gyflawni lles. • Bod plant a phobl ifanc sy'n defnyddio'r gwasanaeth yn cael eu grymuso i gymryd mwy o ran yn y gwaith o ddylunio a darparu'r gwasanaeth drwy roi systemau cyfathrebu ar waith sy'n benodol i'r plentyn / unigolyn ifanc, fydd yn rhoi llais clir iddynt ar yr hyn sy'n bwysig iddynt. Bydd disgwyl i chi: • Cymryd cyfrifoldeb dros ddarparu'r gwasanaeth wrth sicrhau bod Sylva Gardens. yn cydymffurfio'n llawn â Rheoliadau RISCA 2016. • Gweithio gyda'r Rheolwr Adain i weithredu cyfleoedd ar gyfer gwelliannau gwasanaeth sy'n darparu effeithlonrwydd a chynaliadwyedd wrth ddarparu gwasanaethau, gan gynnwys casglu adborth gan rai sy'n defnyddio'r gwasanaeth, eu teulu a'u ffrindiau a budd-ddeiliaid perthnasol eraill. • Hyrwyddo safon ymddygiad personol a phroffesiynol uchel iawn wrth gefnogi diwylliant ar draws y gwasanaeth sy'n wirioneddol gynnes, dilys, llawn ymddiriedaeth, gonest, dibynadwy, cyson a gofalgar. • Darparu goruchwyliaeth ac arweiniad yn y gweithle i Diprwy Reolwyr uwch weithwyr cefnogi a gweithwyr cefnogi a sicrhau eu bod yn gweithio'n ddiogel ac mewn modd sy'n bodloni'r safonau sydd eu hangen gan Weithiwr Gofal Cymdeithasol o fewn Cod Ymddygiad Gofal Cymdeithasol Cymru. . click apply for full job details