Contract Type: Agency Temp, 6 month contract Salary / Benefits 24,500 inc shift allowance Job Elements Our client are looking to recruit QC Testing Operators Working on Double Day shift pattern 6-2, 2-10 with 9pm finish on the Friday with a 20% shift allowance Working within a clean room environment Working as part of a team of 23 carrying out general production and QC duties to ensure all targets are met. Day to day duties include sample preparation for scientific kits, pipetting and using ECI instruments. The ideal candidate will have: Key qualifications - ideally: Science background, min. 5 GCSEs to include Science subjects, and lab experience preferred. Clean room experience would be an advantage but not essential. Someone who is switched on, keen and proactive. Good Maths, English essential. IT skills required (Excel, Word). Petrie Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.
Apr 20, 2024
Seasonal
Contract Type: Agency Temp, 6 month contract Salary / Benefits 24,500 inc shift allowance Job Elements Our client are looking to recruit QC Testing Operators Working on Double Day shift pattern 6-2, 2-10 with 9pm finish on the Friday with a 20% shift allowance Working within a clean room environment Working as part of a team of 23 carrying out general production and QC duties to ensure all targets are met. Day to day duties include sample preparation for scientific kits, pipetting and using ECI instruments. The ideal candidate will have: Key qualifications - ideally: Science background, min. 5 GCSEs to include Science subjects, and lab experience preferred. Clean room experience would be an advantage but not essential. Someone who is switched on, keen and proactive. Good Maths, English essential. IT skills required (Excel, Word). Petrie Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.
Due to continued growth, HMH in Aberdeenshire is expanding our Workshop team and seeking qualified Mechanical Technicians to carry out all aspects of repair, overhaul and assembly on a variety of drilling equipment. Contribute to risk assessments and toolbox talks Perform all job functions in a safe manner Carry out Factory Acceptance Tests (FATs) to Company standards Ensure timesheets and inspection reports are completed accurately and submitted in a timely manner Carry out QC checks at Goods In point as and when required Report and participate in investigation of all unsafe practices and/or behaviours Suggest improvements to working practices and HMH product lines Ensure adherence to all local waste management policies and procedures Be able to operate forklifts, overhead gantry cranes and vertical lift platforms (following training) Successful candidates will: hold a NVQ Level 3/HNC or equivalent in a Mechanical Engineering discipline have a good working knowledge of fluid power systems Be experienced in pressure testing (gas and fluid based) Demonstrate knowledge of mechanical systems Have the ability to read schematic and layout drawings Be able to communicate effectively in English (written and oral) With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Apr 20, 2024
Full time
Due to continued growth, HMH in Aberdeenshire is expanding our Workshop team and seeking qualified Mechanical Technicians to carry out all aspects of repair, overhaul and assembly on a variety of drilling equipment. Contribute to risk assessments and toolbox talks Perform all job functions in a safe manner Carry out Factory Acceptance Tests (FATs) to Company standards Ensure timesheets and inspection reports are completed accurately and submitted in a timely manner Carry out QC checks at Goods In point as and when required Report and participate in investigation of all unsafe practices and/or behaviours Suggest improvements to working practices and HMH product lines Ensure adherence to all local waste management policies and procedures Be able to operate forklifts, overhead gantry cranes and vertical lift platforms (following training) Successful candidates will: hold a NVQ Level 3/HNC or equivalent in a Mechanical Engineering discipline have a good working knowledge of fluid power systems Be experienced in pressure testing (gas and fluid based) Demonstrate knowledge of mechanical systems Have the ability to read schematic and layout drawings Be able to communicate effectively in English (written and oral) With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities KEY PURPOSE Weatherford have an exciting opportunity for an Electro-Mechanical Technician to join the team in Aberdeen. The Electro-Mechanical Technician will have a responsibility to perform qualification testing, assembly, factory acceptance testing and service redress of Weatherford products. KEY RESPONSIBILITIES Assembles and completes Factory Acceptance Testing of WCT products as per technical documentation, drawing specification, process, QC and QA. In collaboration with engineering, assembles first article products and develops assembly and factory acceptance test technical documentation. Conduct in-house test requirements in line with the defines assembly & test procedures In collaboration with engineering executes product qualification test programs and test reporting. Ensures Factory Acceptance Testing of products as per engineering technical documentation, drawing specification, process, QC and QA. Supports effective assembly planning and kitting operations with respect to production schedules. Performs house-keeping duties as required with working in an assembly workshop. Compiles and completes necessary assembly and testing documentation to verify conformance, providing full traceability of all activity associated with the assembly and factory acceptance testing of products. Represents Weatherford via collaboration with third party inspectors as necessary to ensure customer quality control plan witness requirements are adhered to. Supports design for assembly via attendance and contribution to product design reviews and production line assembly design reviews. Provides continual improvement feedback to line management and engineering as necessary to ensure assembly and factory acceptance test operations are adequately resourced. Collaborates with inspection and engineering as necessary to troubleshoot and fault find non-conforming components, sub-assemblies and/or products. Supports technology transfer, know how, training and competency development of strategic manufacturing hub workshop technicians. Any other delegated responsibilities as instructed by Line Management within the timeframe specified in a safe and efficient manner to meet business requirements, provided the instruction is reasonable and you are capable and competent to fulfil these. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Participate in toolbox talks, scheduled hazard hunts and workplace inspections. Create task specific and area risk assessments. Ensure compliance with all Weatherford's policies. Qualifications KNOWLEDGE, SKILLS & EXPERIENCE • Experience in the assembly & test of Completion products. • Experience in the assembly of electro, hydraulic mechanical systems. • Experience in fitting and safety protocols associated with high pressure assembly and hydrostatic test operations. • Proficient at interpreting engineering drawings • Experience of working to NAS 6 cleanliness standards. • Working knowledge of goods in, stores and dispatch procedures. • Working knowledge of ISO9001 and API Quality Management Systems. • Understanding of associated customer quality expectations and the cost of product quality irregularity. • Working knowledge of mechanical engineering practices, standards and specifications. • Proven fault finding skills. • A working knowledge of Microsoft Office. EDUCATION & TRAINING A Relevant College Education Diploma/Certificate. Forklift Certification. Gantry Crane/Banksman Slinger Certification. Proficient User Of Microsoft Office Applications PERSONAL QUALITIES Committed to providing a quality product to the end user. Willingness to collaborate across functions as necessary to continually improve product assembly and factory acceptance test operations. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi functional environment. Function effectively under pressure throughout busy periods. Availability for travel as necessary to support effective technology transfer activities.
Apr 19, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities KEY PURPOSE Weatherford have an exciting opportunity for an Electro-Mechanical Technician to join the team in Aberdeen. The Electro-Mechanical Technician will have a responsibility to perform qualification testing, assembly, factory acceptance testing and service redress of Weatherford products. KEY RESPONSIBILITIES Assembles and completes Factory Acceptance Testing of WCT products as per technical documentation, drawing specification, process, QC and QA. In collaboration with engineering, assembles first article products and develops assembly and factory acceptance test technical documentation. Conduct in-house test requirements in line with the defines assembly & test procedures In collaboration with engineering executes product qualification test programs and test reporting. Ensures Factory Acceptance Testing of products as per engineering technical documentation, drawing specification, process, QC and QA. Supports effective assembly planning and kitting operations with respect to production schedules. Performs house-keeping duties as required with working in an assembly workshop. Compiles and completes necessary assembly and testing documentation to verify conformance, providing full traceability of all activity associated with the assembly and factory acceptance testing of products. Represents Weatherford via collaboration with third party inspectors as necessary to ensure customer quality control plan witness requirements are adhered to. Supports design for assembly via attendance and contribution to product design reviews and production line assembly design reviews. Provides continual improvement feedback to line management and engineering as necessary to ensure assembly and factory acceptance test operations are adequately resourced. Collaborates with inspection and engineering as necessary to troubleshoot and fault find non-conforming components, sub-assemblies and/or products. Supports technology transfer, know how, training and competency development of strategic manufacturing hub workshop technicians. Any other delegated responsibilities as instructed by Line Management within the timeframe specified in a safe and efficient manner to meet business requirements, provided the instruction is reasonable and you are capable and competent to fulfil these. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Participate in toolbox talks, scheduled hazard hunts and workplace inspections. Create task specific and area risk assessments. Ensure compliance with all Weatherford's policies. Qualifications KNOWLEDGE, SKILLS & EXPERIENCE • Experience in the assembly & test of Completion products. • Experience in the assembly of electro, hydraulic mechanical systems. • Experience in fitting and safety protocols associated with high pressure assembly and hydrostatic test operations. • Proficient at interpreting engineering drawings • Experience of working to NAS 6 cleanliness standards. • Working knowledge of goods in, stores and dispatch procedures. • Working knowledge of ISO9001 and API Quality Management Systems. • Understanding of associated customer quality expectations and the cost of product quality irregularity. • Working knowledge of mechanical engineering practices, standards and specifications. • Proven fault finding skills. • A working knowledge of Microsoft Office. EDUCATION & TRAINING A Relevant College Education Diploma/Certificate. Forklift Certification. Gantry Crane/Banksman Slinger Certification. Proficient User Of Microsoft Office Applications PERSONAL QUALITIES Committed to providing a quality product to the end user. Willingness to collaborate across functions as necessary to continually improve product assembly and factory acceptance test operations. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi functional environment. Function effectively under pressure throughout busy periods. Availability for travel as necessary to support effective technology transfer activities.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Apr 19, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Execute inspections as required by Offshore Inspection Engineers (OIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within campaign based NDT inspection teams to complete inspections in line with qualifications. Functions ESSENTIAL • Carry out the most effective NDT techniques to components requiring inspection • Ensure inspection is carried out within the parameters of the applicable specification • Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable. Ensure reports are signed prior to submission to OIE for review/signing. • Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. • Evaluate results of the test in accordance with applicable specification • Utilise rope access capabilities when required working at height for long periods of time • Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken • Ensure that the correct rope access equipment is utilised and that harness is worn at all times • Ensure that work area is safe to carry out rope access activities • Ensure permits are in place for technicians and work-scope is readily available for inspection • Ensure client specific observation / safety cards are being completed • Take part in regular safety and pre job toolbox talks • Carry out risk assessments/Take2 as required • Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence • Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor • Ensure UT technicians perform probe checks each day they perform UT inspection on site • Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management • Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly • Ensure all consumables are in date and consumable certificate of conformance are present. • Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified • Maintain company's inspection files • Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires • Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL • Undertake any other duties of a reasonable nature as required by Management Safety • Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other • Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. • Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company • Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities • No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; performing routine safety talks and resolving problems Reporting Relationship • This person will report to the Project Manager and to the OIE for day to day tasks • Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED • Valid Passport • Valid Full UK Driving Licence • ASNT/PCN Level 2 Ultrasonic Testing • ASNT/PCN Level 2 in MPI and / or DPI. • IRATA Level 1 (minimum). • Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test • Donut and Escape chute Training • Flexible approach, team player and good communication skills • IT literate - Word & Excel (minimum) DESIRED • ASNT/PCN Level 2 or CSWIP Visual Inspection • G CSE pass in English, Maths and Science • Excellent organisation and interpersonal skills Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Apr 19, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Execute inspections as required by Offshore Inspection Engineers (OIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within campaign based NDT inspection teams to complete inspections in line with qualifications. Functions ESSENTIAL • Carry out the most effective NDT techniques to components requiring inspection • Ensure inspection is carried out within the parameters of the applicable specification • Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable. Ensure reports are signed prior to submission to OIE for review/signing. • Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. • Evaluate results of the test in accordance with applicable specification • Utilise rope access capabilities when required working at height for long periods of time • Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken • Ensure that the correct rope access equipment is utilised and that harness is worn at all times • Ensure that work area is safe to carry out rope access activities • Ensure permits are in place for technicians and work-scope is readily available for inspection • Ensure client specific observation / safety cards are being completed • Take part in regular safety and pre job toolbox talks • Carry out risk assessments/Take2 as required • Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence • Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor • Ensure UT technicians perform probe checks each day they perform UT inspection on site • Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management • Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly • Ensure all consumables are in date and consumable certificate of conformance are present. • Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified • Maintain company's inspection files • Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires • Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL • Undertake any other duties of a reasonable nature as required by Management Safety • Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other • Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. • Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company • Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities • No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; performing routine safety talks and resolving problems Reporting Relationship • This person will report to the Project Manager and to the OIE for day to day tasks • Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED • Valid Passport • Valid Full UK Driving Licence • ASNT/PCN Level 2 Ultrasonic Testing • ASNT/PCN Level 2 in MPI and / or DPI. • IRATA Level 1 (minimum). • Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test • Donut and Escape chute Training • Flexible approach, team player and good communication skills • IT literate - Word & Excel (minimum) DESIRED • ASNT/PCN Level 2 or CSWIP Visual Inspection • G CSE pass in English, Maths and Science • Excellent organisation and interpersonal skills Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
We are looking for 5 Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. 4 of these roles will be on shift, and 1 will be covering dayshift. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES • Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. • Provide shift cover for holidays, sickness etc (often at short notice) • Include the following but other duties may be assigned:- • Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. • Liaison with functional groups for all Quality Control related activities/problems. • Interface with Customer/Third Party/certifying authority representatives, as required. • Provide technical support/guidance to work centres for training process inspectors. • Write and revise quality control procedures and related forms • Assist in failure analysis • Perform Receiving Inspection Completion of pipe maps • Administration/sign off/verification of inspections • Verify dimensional and inspection reports for product conformance • Assure identification and traceability of product and materials at all stages of manufacturing process • Write detailed reports as required • Generate Non-compliance reports (NCR •s) in accordance with applicable procedures • Random verification and audit of inspection activities and laboratory testing to support shift. • Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples • Actively participate in Continuous Improvement initiatives • Provide Technical support to work centres & projects on Quality Control requirements • Perform any other duties as directed by the Quality Control Supervisor. • This position has no supervisory responsibilities QUALIFICATIONS • ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all of the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. PERSONALITY • Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) • Flexible attitude and proactive approach coupled with high quality customer service • Good common sense and the ability to use own initiative in prioritising workload • Ability to perform under pressure to deadlines without compromising standards • First class organisational skills with particular emphasis on time management and attention to detail • Conscientious, hard working and willing to perform additional duties to support the Quality team. • A team player but someone who is equally comfortable working alone (self-motivated) EXPERIENCE , • Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. • Ability to respond to common enquiries from management. • Ability to define problems, collect data, establish facts and draw valid conclusions. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. • Competent on all process inspection activities. • Requires working knowledge of Microsoft word, excel and outlook. • Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks) Hourly rate : Pay rate is •20.14 per hour plus an applicable shift allowance (40% for 4 shift pattern -only apply to shift workers) •28.50 for shift •20.14 for day shift
Apr 18, 2024
Contractor
We are looking for 5 Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. 4 of these roles will be on shift, and 1 will be covering dayshift. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES • Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. • Provide shift cover for holidays, sickness etc (often at short notice) • Include the following but other duties may be assigned:- • Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. • Liaison with functional groups for all Quality Control related activities/problems. • Interface with Customer/Third Party/certifying authority representatives, as required. • Provide technical support/guidance to work centres for training process inspectors. • Write and revise quality control procedures and related forms • Assist in failure analysis • Perform Receiving Inspection Completion of pipe maps • Administration/sign off/verification of inspections • Verify dimensional and inspection reports for product conformance • Assure identification and traceability of product and materials at all stages of manufacturing process • Write detailed reports as required • Generate Non-compliance reports (NCR •s) in accordance with applicable procedures • Random verification and audit of inspection activities and laboratory testing to support shift. • Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples • Actively participate in Continuous Improvement initiatives • Provide Technical support to work centres & projects on Quality Control requirements • Perform any other duties as directed by the Quality Control Supervisor. • This position has no supervisory responsibilities QUALIFICATIONS • ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all of the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. PERSONALITY • Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) • Flexible attitude and proactive approach coupled with high quality customer service • Good common sense and the ability to use own initiative in prioritising workload • Ability to perform under pressure to deadlines without compromising standards • First class organisational skills with particular emphasis on time management and attention to detail • Conscientious, hard working and willing to perform additional duties to support the Quality team. • A team player but someone who is equally comfortable working alone (self-motivated) EXPERIENCE , • Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. • Ability to respond to common enquiries from management. • Ability to define problems, collect data, establish facts and draw valid conclusions. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. • Competent on all process inspection activities. • Requires working knowledge of Microsoft word, excel and outlook. • Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks) Hourly rate : Pay rate is •20.14 per hour plus an applicable shift allowance (40% for 4 shift pattern -only apply to shift workers) •28.50 for shift •20.14 for day shift
Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Apr 18, 2024
Contractor
Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Logical Personnel Solutions is recruiting on behalf of a leading valve and rotating equipment engineering company. Due to winning a number of high profile work, we have numerous vacancies for work across the Power Station network in the UK. We require Supervisors, Valve Technicians & QA/QC's in various locations around the UK. Essentially you will need: Recognised industry qualifications Valve overhaul capability Pressure Testing experience Ability to write reports OEM training certs advantageous Comfortable working on site Valid CCNSG or CSCS card The work will undertaking the removal, inspection, overhaul & re-instatement of a variety of in-situ valves to spec. Please get in touch if you have experience in overhauling any of thefollowing: Safety Valves Relief Valves Isolation Valves Control Valves Details: Working 10hr days (paid 9.5) LTD or PAYE Client will pay daily food allowance of working away Client will provide an accommodation allowance if working away Client will provide a mobilisation & demobilisation rate when working away Please call Marc Personnel
Apr 15, 2024
Contractor
Logical Personnel Solutions is recruiting on behalf of a leading valve and rotating equipment engineering company. Due to winning a number of high profile work, we have numerous vacancies for work across the Power Station network in the UK. We require Supervisors, Valve Technicians & QA/QC's in various locations around the UK. Essentially you will need: Recognised industry qualifications Valve overhaul capability Pressure Testing experience Ability to write reports OEM training certs advantageous Comfortable working on site Valid CCNSG or CSCS card The work will undertaking the removal, inspection, overhaul & re-instatement of a variety of in-situ valves to spec. Please get in touch if you have experience in overhauling any of thefollowing: Safety Valves Relief Valves Isolation Valves Control Valves Details: Working 10hr days (paid 9.5) LTD or PAYE Client will pay daily food allowance of working away Client will provide an accommodation allowance if working away Client will provide a mobilisation & demobilisation rate when working away Please call Marc Personnel
Logical Personnel Solutions is recruiting on behalf of a leading valve and rotating equipment engineering company. Due to winning a number of high profile work, we have numerous vacancies for work across the Power Station network in the UK. We require Supervisors, Valve Technicians & QA/QC's in various locations around the UK. Essentially you will need: Recognised industry qualifications Valve overhaul capability Pressure Testing experience Ability to write reports OEM training certs advantageous Comfortable working on site Valid CCNSG or CSCS card The work will undertaking the removal, inspection, overhaul & re-instatement of a variety of in-situ valves to spec. Please get in touch if you have experience in overhauling any of thefollowing: Safety Valves Relief Valves Isolation Valves Control Valves Details: Working 10hr days (paid 9.5) LTD or PAYE Client will pay daily food allowance of working away Client will provide an accommodation allowance if working away Client will provide a mobilisation & demobilisation rate when working away Please call Marc Personnel
Apr 15, 2024
Contractor
Logical Personnel Solutions is recruiting on behalf of a leading valve and rotating equipment engineering company. Due to winning a number of high profile work, we have numerous vacancies for work across the Power Station network in the UK. We require Supervisors, Valve Technicians & QA/QC's in various locations around the UK. Essentially you will need: Recognised industry qualifications Valve overhaul capability Pressure Testing experience Ability to write reports OEM training certs advantageous Comfortable working on site Valid CCNSG or CSCS card The work will undertaking the removal, inspection, overhaul & re-instatement of a variety of in-situ valves to spec. Please get in touch if you have experience in overhauling any of thefollowing: Safety Valves Relief Valves Isolation Valves Control Valves Details: Working 10hr days (paid 9.5) LTD or PAYE Client will pay daily food allowance of working away Client will provide an accommodation allowance if working away Client will provide a mobilisation & demobilisation rate when working away Please call Marc Personnel
About This Role We have a new opportunity for a Quality Control Radiochemist to join our Radiopharmacy site in Sutton. This is a full time position working 40 hours a week with a salary of between £31,000 - £40,000 (dependant on experience). Ideally you should be a scientific graduate with an Analytical Chemistry background, ideally with experience of (radio) pharmaceutical QC in a GMP environment. Please note that we will be interviewing throughout the duration of this advert. Therefore if you are interested in this role an early application is advised as we may close the advert prior to the advertised date. Radiochemist (Quality Control) Main Role Undertake the quality control operations to be carried out in respect of each batch of PET radiopharmaceuticals prior to release for patient use. Duties & Responsibilities QC routines Operate and maintain routine protocols for the Erigal chemistry laboratory including the production of standard 18FDG synthesis and other PET tracers in strict adherence to GMP and relevant EU pharmacopoeia standards. Manage raw material sampling, testing and release system. Maintenance Ensure efficient performance of, and undertake first-line maintenance of, Quality Control equipment including HPLC (radiochemical and chemical purity of 18F FDG), Gas Chromatography, pH measurement, Osmolality and LAL. Faults Maintain records of faults on any dysfunction - operational or equipment. Quality Systems In association with the QP to develop, implement and manage cGMP, Quality Control and Quality Assurance systems and procedures for standard PET tracers. Timetable Undertake function no.1 above in accordance with a pre-determined daily timetable. Materials Ordering of chemicals, glassware, cleaning and other consumables for routine QC analysis. Formulation of reagents for radiochemistry, mixing of solvents for HPLC and other analyses, cleaning of glassware and disposal of waste chemicals and materials. Standard Operating Procedures Prepare updated SOPs in accordance with the relevant guidelines as may be necessary from time to time for approval by the QP and adoption by the unit. Training Others Provide training and support for others selected as rota / backup in undertaking routine QC operations. R & D Search out, promote and manage R& D initiatives that both enhance the reputation of Erigal and their professional staffs as is consistent within approved budgets and grants. Skills in Radiochemistry Develop necessary skills to advise and support radiochemical laboratory technician/s with specific reference to the functions of Synthesis and Dispensing of radiotracers. Maintain understanding of best practice and changes in requirements for QC analytical testing. Safety and Control Assume responsibility for the safe and efficient handling of all radioactive sample substances (solid, gas, liquid) received from the Hot Cells room for QC tests including their movement, storage, containerisation and decay control. In accordance with local rules for emergency or serious incident procedure record such events in accordance with SOPs. Responsible for following agreed safety procedures to ensure safety of yourself and others. Regulatory Strictly adhere to GMP, GLP and safety protocols laid down by the MHRA, EA and HSE in accordance with issued licenses as determined from time to time. Corresponding adherence to local rules developed by Erigal in conformity to such licensing requirement. Alliance Medical Values Alliance Medical Values: Leaders, managers, and supervisors have a particular responsibility to be role models in terms of how they demonstrate these values themselves and how they engage their teams to work in this way. Collaboration: We work together and in partnership for all our patients. We respect expertise and combine it to achieve more. Excellence: We never compromise. We strive to deliver the very best in everything we do to ensure the highest quality of care. We treat our patients and each other with compassion, dignity and respect. Learning: Knowledge and understanding comes from learning. At Alliance Medical we are committed to ensuring that each and every one of us keeps on learning and that we continuously look for improved ways of working. Efficiency: Efficiency in healthcare means more patients get better care. We constantly seek new ways to use the scarce resource of healthcare more intelligently so that more people can live longer, fuller lives. Openness: We act with transparency and honesty in everything we do, where staff are encouraged to speak up to ensure a safe and secure environment for our patients.
Sep 23, 2022
Full time
About This Role We have a new opportunity for a Quality Control Radiochemist to join our Radiopharmacy site in Sutton. This is a full time position working 40 hours a week with a salary of between £31,000 - £40,000 (dependant on experience). Ideally you should be a scientific graduate with an Analytical Chemistry background, ideally with experience of (radio) pharmaceutical QC in a GMP environment. Please note that we will be interviewing throughout the duration of this advert. Therefore if you are interested in this role an early application is advised as we may close the advert prior to the advertised date. Radiochemist (Quality Control) Main Role Undertake the quality control operations to be carried out in respect of each batch of PET radiopharmaceuticals prior to release for patient use. Duties & Responsibilities QC routines Operate and maintain routine protocols for the Erigal chemistry laboratory including the production of standard 18FDG synthesis and other PET tracers in strict adherence to GMP and relevant EU pharmacopoeia standards. Manage raw material sampling, testing and release system. Maintenance Ensure efficient performance of, and undertake first-line maintenance of, Quality Control equipment including HPLC (radiochemical and chemical purity of 18F FDG), Gas Chromatography, pH measurement, Osmolality and LAL. Faults Maintain records of faults on any dysfunction - operational or equipment. Quality Systems In association with the QP to develop, implement and manage cGMP, Quality Control and Quality Assurance systems and procedures for standard PET tracers. Timetable Undertake function no.1 above in accordance with a pre-determined daily timetable. Materials Ordering of chemicals, glassware, cleaning and other consumables for routine QC analysis. Formulation of reagents for radiochemistry, mixing of solvents for HPLC and other analyses, cleaning of glassware and disposal of waste chemicals and materials. Standard Operating Procedures Prepare updated SOPs in accordance with the relevant guidelines as may be necessary from time to time for approval by the QP and adoption by the unit. Training Others Provide training and support for others selected as rota / backup in undertaking routine QC operations. R & D Search out, promote and manage R& D initiatives that both enhance the reputation of Erigal and their professional staffs as is consistent within approved budgets and grants. Skills in Radiochemistry Develop necessary skills to advise and support radiochemical laboratory technician/s with specific reference to the functions of Synthesis and Dispensing of radiotracers. Maintain understanding of best practice and changes in requirements for QC analytical testing. Safety and Control Assume responsibility for the safe and efficient handling of all radioactive sample substances (solid, gas, liquid) received from the Hot Cells room for QC tests including their movement, storage, containerisation and decay control. In accordance with local rules for emergency or serious incident procedure record such events in accordance with SOPs. Responsible for following agreed safety procedures to ensure safety of yourself and others. Regulatory Strictly adhere to GMP, GLP and safety protocols laid down by the MHRA, EA and HSE in accordance with issued licenses as determined from time to time. Corresponding adherence to local rules developed by Erigal in conformity to such licensing requirement. Alliance Medical Values Alliance Medical Values: Leaders, managers, and supervisors have a particular responsibility to be role models in terms of how they demonstrate these values themselves and how they engage their teams to work in this way. Collaboration: We work together and in partnership for all our patients. We respect expertise and combine it to achieve more. Excellence: We never compromise. We strive to deliver the very best in everything we do to ensure the highest quality of care. We treat our patients and each other with compassion, dignity and respect. Learning: Knowledge and understanding comes from learning. At Alliance Medical we are committed to ensuring that each and every one of us keeps on learning and that we continuously look for improved ways of working. Efficiency: Efficiency in healthcare means more patients get better care. We constantly seek new ways to use the scarce resource of healthcare more intelligently so that more people can live longer, fuller lives. Openness: We act with transparency and honesty in everything we do, where staff are encouraged to speak up to ensure a safe and secure environment for our patients.
Manufacturing Process Technician Rochdale Competitive Salary depending on experience, pension, 25 days holiday A fantastic opportunity has arisen for a Process Technician to join the manufacturing team at the world leader in the development and production of inks, dyes and functional coatings. Purpose of the Job: To undertake all production activities which include a hands-on approach to the manufacturing process whilst ensuring the correct testing of production batches prior to their release for shipment to customers. Assist in improving quality and process standards. Conduct basic running maintenance and repairs on plant and machinery. Ensure all work activities are conducted in a safe manner and to the appropriate quality and efficiency standards (including production targets) Key responsibilities include: Production output and efficiency. Colour matching to specific standards, Draw-downs & comparison to standard for production inks. Follow all appropriate procedures effectively and perform all appropriate tasks within set time scales and to set standards, SOP's & test methods, process order QC instructions and other duties as defined by shift management. Ensure appropriate data is recorded accurately and in a timely fashion, ensure the regular maintenance of all records. Documenting QC measurements; receipting process orders on SAP and filing paperwork. Specific testing to defined standards or tolerances of samples, products, raw materials and the like. Inspection of finished inks and raw materials as required. Review and improve existing systems and processes in order to improve effectiveness. Identify and introduce new systems and processes that improve the area or business as appropriate. Improvements geared towards productivity, yield and RFT Qualifications / Experience Critical for the job Holder Basic Secondary Education Computer Literate Colour Vision competency The company Our client is the world's largest producer of printing inks and pigments and a leading provider of materials to packaging, publication, coatings, plastics, cosmetics, electronic materials, brand protection, specialty services and other industrial markets. No agencies please. You must be eligible to work in the UK. How to apply for the Manufacturing Process Technician role: If you have the skills and experience required for this position, click "apply" today and you will be directed to the client's website where you will be able to submit your application. You must be eligible to work in the UK. Other suitable skills and experience includes Production Technician, Process Technician, Manufacturing Technician, Process Operative, Production Operative, Manufacturing Engineer, Processing Technician
Dec 06, 2021
Full time
Manufacturing Process Technician Rochdale Competitive Salary depending on experience, pension, 25 days holiday A fantastic opportunity has arisen for a Process Technician to join the manufacturing team at the world leader in the development and production of inks, dyes and functional coatings. Purpose of the Job: To undertake all production activities which include a hands-on approach to the manufacturing process whilst ensuring the correct testing of production batches prior to their release for shipment to customers. Assist in improving quality and process standards. Conduct basic running maintenance and repairs on plant and machinery. Ensure all work activities are conducted in a safe manner and to the appropriate quality and efficiency standards (including production targets) Key responsibilities include: Production output and efficiency. Colour matching to specific standards, Draw-downs & comparison to standard for production inks. Follow all appropriate procedures effectively and perform all appropriate tasks within set time scales and to set standards, SOP's & test methods, process order QC instructions and other duties as defined by shift management. Ensure appropriate data is recorded accurately and in a timely fashion, ensure the regular maintenance of all records. Documenting QC measurements; receipting process orders on SAP and filing paperwork. Specific testing to defined standards or tolerances of samples, products, raw materials and the like. Inspection of finished inks and raw materials as required. Review and improve existing systems and processes in order to improve effectiveness. Identify and introduce new systems and processes that improve the area or business as appropriate. Improvements geared towards productivity, yield and RFT Qualifications / Experience Critical for the job Holder Basic Secondary Education Computer Literate Colour Vision competency The company Our client is the world's largest producer of printing inks and pigments and a leading provider of materials to packaging, publication, coatings, plastics, cosmetics, electronic materials, brand protection, specialty services and other industrial markets. No agencies please. You must be eligible to work in the UK. How to apply for the Manufacturing Process Technician role: If you have the skills and experience required for this position, click "apply" today and you will be directed to the client's website where you will be able to submit your application. You must be eligible to work in the UK. Other suitable skills and experience includes Production Technician, Process Technician, Manufacturing Technician, Process Operative, Production Operative, Manufacturing Engineer, Processing Technician
O.C.O Technology are currently looking to recruit an Office Administrator to join our team based in Avonmouth. You will join us on a full-time, permanent basis, and in return, you will receive a competitive salary plus an excellent benefits package. About the Office Administrator role: Reporting to the Site Manager, you will build close working relationships with the O.C.O team at all levels - from Site Staff to the Leadership Team - as well as with external customers, suppliers and contractors. You will provide administrative support for the Avonmouth Site Manager and the Avonmouth QC team, as well as ensuring that all goods inward/outward and office documents are appropriately recorded, processed, and maintained in an accurate and diligent manner. This role will, by its very nature, potentially expose the individual to confidential information, including staff records, banking information and O.C.O finances in general which will need to be treated and maintained with the utmost confidence. Key responsibilities of our Office Administrator: - Maintaining and recording all inward and outwards deliveries to and from site, checking and verifying against various supplier invoices - Producing tickets for al aggregate deliveries and collections leaving the site - Acting as the first point of contact for visitors, customers and suppliers when arriving on-site, including maintaining the visitor's log, basic site inductions and visitors PPE - Issuing purchase orders and maintaining records, logging receipt of goods and invoices, with routine and regular reviews of outstanding items using the company's Purchase Control system - Providing all necessary information for payroll purposes to the Site Manager - e.g. P45/P60, Overtime, etc - Maintaining stock and purchase control in specifically agreed areas such as office (including stationary), general site and laboratory provisions - Ensuring the office and reception are maintained in a clean and tidy condition - Providing basic cover in the Laboratory for the Quality Control Technician What we're looking for in our Office Administrator : Essential - Experience within an office administrative environment - Accuracy, diligence, organised and conscientious - The ability to keep certain tasks and information confidential and private - Willingness to be innovative, working under own initiative with the ability to plan, prioritise and organise tasks - Sound judgement skills with a rational and flexible approach to work - The ability to communicate clearly and concisely - Must be well versed in Microsoft Office, especially Word, Excel and Outlook with sound literacy and numeracy skills Desirable - Training in Health and Safety and/or First Aider - Knowledge of the Waste/Aggregate/Concrete industry - Experience in a production environment Closing Date: Monday 29th March 2021 So, if you would like to join our team as our Office Administrator then please click ' apply ' today - don't miss out, we'd love to hear from you!
Apr 15, 2021
Full time
O.C.O Technology are currently looking to recruit an Office Administrator to join our team based in Avonmouth. You will join us on a full-time, permanent basis, and in return, you will receive a competitive salary plus an excellent benefits package. About the Office Administrator role: Reporting to the Site Manager, you will build close working relationships with the O.C.O team at all levels - from Site Staff to the Leadership Team - as well as with external customers, suppliers and contractors. You will provide administrative support for the Avonmouth Site Manager and the Avonmouth QC team, as well as ensuring that all goods inward/outward and office documents are appropriately recorded, processed, and maintained in an accurate and diligent manner. This role will, by its very nature, potentially expose the individual to confidential information, including staff records, banking information and O.C.O finances in general which will need to be treated and maintained with the utmost confidence. Key responsibilities of our Office Administrator: - Maintaining and recording all inward and outwards deliveries to and from site, checking and verifying against various supplier invoices - Producing tickets for al aggregate deliveries and collections leaving the site - Acting as the first point of contact for visitors, customers and suppliers when arriving on-site, including maintaining the visitor's log, basic site inductions and visitors PPE - Issuing purchase orders and maintaining records, logging receipt of goods and invoices, with routine and regular reviews of outstanding items using the company's Purchase Control system - Providing all necessary information for payroll purposes to the Site Manager - e.g. P45/P60, Overtime, etc - Maintaining stock and purchase control in specifically agreed areas such as office (including stationary), general site and laboratory provisions - Ensuring the office and reception are maintained in a clean and tidy condition - Providing basic cover in the Laboratory for the Quality Control Technician What we're looking for in our Office Administrator : Essential - Experience within an office administrative environment - Accuracy, diligence, organised and conscientious - The ability to keep certain tasks and information confidential and private - Willingness to be innovative, working under own initiative with the ability to plan, prioritise and organise tasks - Sound judgement skills with a rational and flexible approach to work - The ability to communicate clearly and concisely - Must be well versed in Microsoft Office, especially Word, Excel and Outlook with sound literacy and numeracy skills Desirable - Training in Health and Safety and/or First Aider - Knowledge of the Waste/Aggregate/Concrete industry - Experience in a production environment Closing Date: Monday 29th March 2021 So, if you would like to join our team as our Office Administrator then please click ' apply ' today - don't miss out, we'd love to hear from you!