TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 17, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 16, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Apr 16, 2024
Full time
TITLE Quality Control Inspector DEPARTMENT Quality RESPONSIBLE TO Quality Supervisor / Production Manager LAST UPDATED 02/MAR/2024 ROLE SUMMARY Quality Control Inspector is actively engaged to ensure products produced meet customer requirements and ensure quality control systems are maintained throughout manufacture. Inspectors will have day to day responsibility for working with staff in Quality and Technical departments, while progressing jobs with engineers and machine operators. ROLE AND RESPONSIBILITIES - Support the Quality Control Supervisor in the day-to-day operation of the inspection department. - Ensure quality control systems are maintained and followed. - Carry out first/last off inspections against engineering drawings and 3D models on production batches, New-Products & Prototypes - Carry out final dimensional inspections against engineering drawings and complete applicable reports. Including CTQs (Critical-to-quality dimensions) & FAI (First-article-inspection) - Carry out Visual & Function checks as required piece-parts and assemblies - Carry out sample inspection and spot-checks on production work as required. - Carry out training with all SPM staff on inspection equipment. - Support inspection department to ensure calibration system is maintained. - Support Inspection department to ensure Inspection machines & equipment are serviced and maintained. - Work with production operatives to achieve product conformity. - Work with Production team to achieve customer due dates. - Creating and completing customer specific inspection report using IPI inspection computer software and company MRP system. - Customer facing inspector as required. - Creating reports for quality manager as required. REQUIRED EXPERIENCE - Understanding of engineering drawings - Previous experience of using CMM - Previous experience and knowledge of handheld inspection equipment & shadow-graph - Experience of using gauging. - Computer literate - Previous experience working with geometric tolerance, OGP and Vicci Vision equipment is desirable but not essential. GENERAL GUIDELINES - Have a helpful attitude towards all management and all employees, fostering good working relationships & in particular drive to ensure quality of work is maintained. - Give specific attention to detail to those on his/her section and other sections as required by management - Good time keeping - Maintain good working practises, ensuring all first-off inspection is completed promptly and ready for shift operators. - Uphold Company policies including but not exhaustive of, eating and drinking policy, mobile phones and IT equipment policies - Implement Health and safety policy, which is relevant to his/her section
Power up your career today Mechanical Technician Hull Are you looking for a new challenge, with an organisation known for safe, reliable, and efficient operations, as well as an existing team of Engineers with excellent technical capability? The Role: Keeping the plant running and reliable, whilst working alongside a talented team of engineers and operators, following site procedures and maintenance strategies to ensure maximum asset availability and production outputs. Key Accountabilities Fault diagnosisRoutine maintenanceEnsure quality, health, safety and environmental policies and procedures are adhered to and maintainedTroubleshoot and provide outcomes to maintenance and engineering issues. Schedule and update works via CMMSManage contracts and supervision of contractors.Work to and deliver maintenance strategies and procedures. About you:You will hold formal engineering qualifications, HNC or equivalent in a related mechanical discipline or similar, preferably craft apprenticeship trained. Experience of mechanical maintenance, planning and performing routine and breakdown maintenance, on process plant and equipment. Ideally, you will have exposure to heavy industry, chemical processes, oil & gas and/ or power generation environments and their associated assets.Demonstrate your ability to work towards safety, environmental and operational policies, frameworks, and statutory legislationYou will hold the correct right to work in the UK, without restriction. What's in it for you? Aside from joining an organisation full of talented individuals and impressive operations across the UK, you will be handsomely rewarded financially. You can expect to achieve a basic salary of c£45-55k, plus a generous compensation and benefits package including: Pension, up to 12% employerBonus, up to 15%Holidays, 25 daysOvertimePrivate healthcarePrivate dental plansLife assuranceIncome protectionGym membershipCycle to workEV schemeProgression and development #
Apr 12, 2024
Full time
Power up your career today Mechanical Technician Hull Are you looking for a new challenge, with an organisation known for safe, reliable, and efficient operations, as well as an existing team of Engineers with excellent technical capability? The Role: Keeping the plant running and reliable, whilst working alongside a talented team of engineers and operators, following site procedures and maintenance strategies to ensure maximum asset availability and production outputs. Key Accountabilities Fault diagnosisRoutine maintenanceEnsure quality, health, safety and environmental policies and procedures are adhered to and maintainedTroubleshoot and provide outcomes to maintenance and engineering issues. Schedule and update works via CMMSManage contracts and supervision of contractors.Work to and deliver maintenance strategies and procedures. About you:You will hold formal engineering qualifications, HNC or equivalent in a related mechanical discipline or similar, preferably craft apprenticeship trained. Experience of mechanical maintenance, planning and performing routine and breakdown maintenance, on process plant and equipment. Ideally, you will have exposure to heavy industry, chemical processes, oil & gas and/ or power generation environments and their associated assets.Demonstrate your ability to work towards safety, environmental and operational policies, frameworks, and statutory legislationYou will hold the correct right to work in the UK, without restriction. What's in it for you? Aside from joining an organisation full of talented individuals and impressive operations across the UK, you will be handsomely rewarded financially. You can expect to achieve a basic salary of c£45-55k, plus a generous compensation and benefits package including: Pension, up to 12% employerBonus, up to 15%Holidays, 25 daysOvertimePrivate healthcarePrivate dental plansLife assuranceIncome protectionGym membershipCycle to workEV schemeProgression and development #
M4 Recruitment are working with a well-established precision engineering company based in Swindon. They are specialist in the production of long-lasting components from Nickel based alloys. They predominantly service the defence, aerospace, power generation, oil & gas and food industries. This role is a 4 day working week 0 working Monday - Wednesday (Apply online only) and Thursday (Apply online only). Reporting directly to the shopfloor supervisor. The responsibilities of the role will include: Setting and Operating CNC Lathes Creating, reading and adjusting programs, changing offsets and setting work-shifts Operating a wide range of measurement devices, procedures and machining techniques Ability to perform complex machining processes, which may include prototype products Ability to produce new programs from drawing for parts, for new and existing customers Ability to perform inspections duties, measuring and documenting from inspection reports and where applicable be able to use CMM Machines as and when required Requirements for the role: A minimum of 3 years experience working on CNC Lathes Ability to read and understand engineering drawings GCSE C or equivalent in Mathmatics Ability to work on own initiative Experience of operating Fanuc and/or Heidenhain machines
Apr 11, 2024
Full time
M4 Recruitment are working with a well-established precision engineering company based in Swindon. They are specialist in the production of long-lasting components from Nickel based alloys. They predominantly service the defence, aerospace, power generation, oil & gas and food industries. This role is a 4 day working week 0 working Monday - Wednesday (Apply online only) and Thursday (Apply online only). Reporting directly to the shopfloor supervisor. The responsibilities of the role will include: Setting and Operating CNC Lathes Creating, reading and adjusting programs, changing offsets and setting work-shifts Operating a wide range of measurement devices, procedures and machining techniques Ability to perform complex machining processes, which may include prototype products Ability to produce new programs from drawing for parts, for new and existing customers Ability to perform inspections duties, measuring and documenting from inspection reports and where applicable be able to use CMM Machines as and when required Requirements for the role: A minimum of 3 years experience working on CNC Lathes Ability to read and understand engineering drawings GCSE C or equivalent in Mathmatics Ability to work on own initiative Experience of operating Fanuc and/or Heidenhain machines
CMM Programmer Operator Quality Control Inspector c. £35,000 to £50,000 inc overtime + 33 days Holiday A genuine opportunity for advancement and movement within a global group of companies. Working two rolling shifts 6am to 2pm and 2pm to 9.30pm with as much over time as you would like usually available...... click apply for full job details
Sep 18, 2022
Full time
CMM Programmer Operator Quality Control Inspector c. £35,000 to £50,000 inc overtime + 33 days Holiday A genuine opportunity for advancement and movement within a global group of companies. Working two rolling shifts 6am to 2pm and 2pm to 9.30pm with as much over time as you would like usually available...... click apply for full job details
Metrology Engineer (CMM Machines) Swindon Up to £35,000 DOE 25 + 8 days holiday + Benefits Monday to Thursday 08:00 to 16:45 Friday finish 12:00. 12 month rolling contract with realistic extensions and potential for a permanent contract Metrology Engineer with CMM programming skills sought for a modern, high tech global manufacturer. The role will be suited to an experienced Metrology Engineer/CMM programmer operator, from a precision engineering environment. You will have proven experience with CMM program writing, ability to conduct current program reviews, carry out basic fault finding and rectification. You will also be the first point of contact for all CMM related issues. The Metrology Engineer role will be to take ownership of the CMM area responsible for 3 CMM machines. You will undertake writing CMM programs for new products, conduct prove out activities for new components and review all current CMM programs. As the first point of contact for all CMM related issues you will use your skill and experience to fault find diagnose and where possible repair. You will also conduct calibration activities within the role and ISIR for all purchased components. This role will work in conjunction with the quality manager in conducting internal process & Area audits. The Person: * Hold a relevant engineering qualification * Have proven CMM program writing & CMM machine operation experienced * Proven ability to fault find & repair basic machine issues * Have a good Knowledge of quality systems and continuous improvement tools in a precision engineering environment.
Feb 22, 2022
Full time
Metrology Engineer (CMM Machines) Swindon Up to £35,000 DOE 25 + 8 days holiday + Benefits Monday to Thursday 08:00 to 16:45 Friday finish 12:00. 12 month rolling contract with realistic extensions and potential for a permanent contract Metrology Engineer with CMM programming skills sought for a modern, high tech global manufacturer. The role will be suited to an experienced Metrology Engineer/CMM programmer operator, from a precision engineering environment. You will have proven experience with CMM program writing, ability to conduct current program reviews, carry out basic fault finding and rectification. You will also be the first point of contact for all CMM related issues. The Metrology Engineer role will be to take ownership of the CMM area responsible for 3 CMM machines. You will undertake writing CMM programs for new products, conduct prove out activities for new components and review all current CMM programs. As the first point of contact for all CMM related issues you will use your skill and experience to fault find diagnose and where possible repair. You will also conduct calibration activities within the role and ISIR for all purchased components. This role will work in conjunction with the quality manager in conducting internal process & Area audits. The Person: * Hold a relevant engineering qualification * Have proven CMM program writing & CMM machine operation experienced * Proven ability to fault find & repair basic machine issues * Have a good Knowledge of quality systems and continuous improvement tools in a precision engineering environment.
The Job ResponsibilitiesPurpose of FunctionGive Mechanical, Electrical and Technical support to the Blyth Manufacturing site in terms of preventative maintenance, reactive/breakdown maintenance, support of new installations and improvements to increase reliability and reduce running costs. Across the site there are a wide range of CNC machines (including Star, GMC, Mazak and Haas), bespoke manufacturing equipment and automated robotic cells in order to manufacture cylinders and assemble breathing apparatus.The role in addition to the above will specifically target improvements on production equipment to increase uptime, reliability and Volume. the skill set needed to complete this is knowledge of automated equiment - Robotics, PLC, Electrical, pneumatic, control and process instrumentation.This position also includes participation of a call out rota which supports the Manufacturing department 7 days per week.The function reports into the Maintenance Supervisor and recieves daily priorities from both the Maintenance and Production Supervisors.Tasks and Responsibilities1. All employees have a responsibility to comply with the Integrated Management System (IMS) and minimise any impact on the environment whilst carrying out their duties2. Ensure all work is carried out to H&S standards - Lock out tag out (LOTO), Permit to work (PTW) for both Contractors and Draeger personnel, all equipment requiring LOLER inspections are coordinated to ensure all lifting and slinging equipment is always within inspection date3. Perform planned Maintenance activities and maintain a high level of PPM compliance >90% - coordinate with Production Supervisor for equipment access4. Control machine spares for area of responsibility - sourcing, ordering and organizing - utilize the vend machine for repetitive high volume consumable parts and other critical spares which can be controlled with this method5. Maintain records of all Maintenance work - In-house breakdowns, corrective work and external contracted work from OEM suppliers and specialists - utilize the CMMS system (Pirana) to ensure records and history is updated frequently and following all work6. Work with Production to ensure TPM checks are completed by the operators and any Maintenance corrective actions are followed up and completed within the specified timeframe7. Undertake unplanned/breakdown repair activities liaising with production.8. Provide out of hours maintenance support for all areas working shifts9. Undertake Project work which will involve machine moves, installations, upgrades and improvements. Involvement in setting up spares system for new and existing equipment, preventative maintenance records and TPM checks for Operators10. Liaise with external suppliers and specialists to fault find and support Machine reliability11. Utilize root cause analysis and complete breakdown reports to determine root cause and implement countermeasures to prevent reoccurrence12. Identify and implement Projects to increase productivity, reliability and uptime of automated equipment within manufacturing13. Take responsibility for 6S and housekeeping in own workshop and other areas used - 6S target >85%14. Assist with mentoring, training and guidance of apprentices, operators and other members of staff as required15. Attend meetings to provide technical support on breakdowns or work arounds when equipment has failed - dates for when countermeasure will be put in place and improved Maintenance techniques16. Participate in training and development opportunities to keep knowledge abreast with technology17. Occasional offsite travel to visit machine builders, training or equipment inspectionsYour QualificationsTime served through an Apprenticeship (preferred)Minimum HNC in Mechanical or Electrical ( essential)H&S qualification - IOSH (preferred)Experience of fault-finding bespoke equipment - Mech & Elec (Essential)Experience in a high-quality focused environment (Essential)Multi skilled Technician - Mech/Elec ( Essential)DesirableCNC equipment - Mazak, Haas, GMC, StarProven knowledge of PLC fault finding, modifications and upgradesProven knowledge of Inverter controlProven knowledge of control systemsProven knowledge of RoboticsDesirablePLC Trained (Desired)Fanuc Robot Trained (Desired)H&S - IOSH working/managing safely18th EditionPermit to Work knowledge & understandingWho we areDräger is a leading international company in the fields of medical and safety technology. Whether in clinical applications, in industry, mining or emergency services: Dräger products protect, support and save lives. That's what our more than 15,000 employees have been striving for - every day for more than 130 years.If you have any questions, please contactNiki TaylorE-Mail: :
Dec 07, 2021
Full time
The Job ResponsibilitiesPurpose of FunctionGive Mechanical, Electrical and Technical support to the Blyth Manufacturing site in terms of preventative maintenance, reactive/breakdown maintenance, support of new installations and improvements to increase reliability and reduce running costs. Across the site there are a wide range of CNC machines (including Star, GMC, Mazak and Haas), bespoke manufacturing equipment and automated robotic cells in order to manufacture cylinders and assemble breathing apparatus.The role in addition to the above will specifically target improvements on production equipment to increase uptime, reliability and Volume. the skill set needed to complete this is knowledge of automated equiment - Robotics, PLC, Electrical, pneumatic, control and process instrumentation.This position also includes participation of a call out rota which supports the Manufacturing department 7 days per week.The function reports into the Maintenance Supervisor and recieves daily priorities from both the Maintenance and Production Supervisors.Tasks and Responsibilities1. All employees have a responsibility to comply with the Integrated Management System (IMS) and minimise any impact on the environment whilst carrying out their duties2. Ensure all work is carried out to H&S standards - Lock out tag out (LOTO), Permit to work (PTW) for both Contractors and Draeger personnel, all equipment requiring LOLER inspections are coordinated to ensure all lifting and slinging equipment is always within inspection date3. Perform planned Maintenance activities and maintain a high level of PPM compliance >90% - coordinate with Production Supervisor for equipment access4. Control machine spares for area of responsibility - sourcing, ordering and organizing - utilize the vend machine for repetitive high volume consumable parts and other critical spares which can be controlled with this method5. Maintain records of all Maintenance work - In-house breakdowns, corrective work and external contracted work from OEM suppliers and specialists - utilize the CMMS system (Pirana) to ensure records and history is updated frequently and following all work6. Work with Production to ensure TPM checks are completed by the operators and any Maintenance corrective actions are followed up and completed within the specified timeframe7. Undertake unplanned/breakdown repair activities liaising with production.8. Provide out of hours maintenance support for all areas working shifts9. Undertake Project work which will involve machine moves, installations, upgrades and improvements. Involvement in setting up spares system for new and existing equipment, preventative maintenance records and TPM checks for Operators10. Liaise with external suppliers and specialists to fault find and support Machine reliability11. Utilize root cause analysis and complete breakdown reports to determine root cause and implement countermeasures to prevent reoccurrence12. Identify and implement Projects to increase productivity, reliability and uptime of automated equipment within manufacturing13. Take responsibility for 6S and housekeeping in own workshop and other areas used - 6S target >85%14. Assist with mentoring, training and guidance of apprentices, operators and other members of staff as required15. Attend meetings to provide technical support on breakdowns or work arounds when equipment has failed - dates for when countermeasure will be put in place and improved Maintenance techniques16. Participate in training and development opportunities to keep knowledge abreast with technology17. Occasional offsite travel to visit machine builders, training or equipment inspectionsYour QualificationsTime served through an Apprenticeship (preferred)Minimum HNC in Mechanical or Electrical ( essential)H&S qualification - IOSH (preferred)Experience of fault-finding bespoke equipment - Mech & Elec (Essential)Experience in a high-quality focused environment (Essential)Multi skilled Technician - Mech/Elec ( Essential)DesirableCNC equipment - Mazak, Haas, GMC, StarProven knowledge of PLC fault finding, modifications and upgradesProven knowledge of Inverter controlProven knowledge of control systemsProven knowledge of RoboticsDesirablePLC Trained (Desired)Fanuc Robot Trained (Desired)H&S - IOSH working/managing safely18th EditionPermit to Work knowledge & understandingWho we areDräger is a leading international company in the fields of medical and safety technology. Whether in clinical applications, in industry, mining or emergency services: Dräger products protect, support and save lives. That's what our more than 15,000 employees have been striving for - every day for more than 130 years.If you have any questions, please contactNiki TaylorE-Mail: :