Key role to ensure client deliverables are provided on time, to budget and to client expectations the survey department. You will be accountable for ensuring jobs are delivery on time, within budget and to the required standard . Reporting directly to the Survey Manager. You will be responsible for: Provide daily support to the Surveyors. Provide effective utilisation of labour and equipment, including servicing and calibration. Communicate with the onshore Engineering team to ensure scope is fully understood. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management. Undertake any other general duties that may be requested. Leadership Activities Drive a culture of WeChallenge. Ensure a robust onboarding process is deployed for all personnel - with specific focus on new starts. Active participation to ensure team have current and active objectives and development plans in place. Supporting 'Exchange Zones' roll-out and deployment across business area. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management Survey Supervisor (day to day focus of team) Check and deliver key site information obtained by the surveyors to support the preparation of engineering documents to support the delivery of client. The above shall be achieved by application of competent technical knowledge and experienced gained via qualification and experience and will involve preparation of the following, but not limited to: - Site Sketches Dimension Control Scan Data Validation of proposed modifications Scan Databases Existing Isometrics Provide effective utilisation of labour and equipment, including servicing and calibration. Assist engineering where necessary understanding scopes, queries related directly to deliverables. Provide effective support for the Line Manager as and when required. What skills & experience you'll bring to us HNC/HND in Mechanical Engineering and/or complimentary/eqv qualification(s) Experience of Dimensional Control techniques, software, and equipment. Experience in Offshore Design Site Survey (Piping/Structural) Basic constructability knowledge and awareness Strong communicator, written and verbal. Working and demonstrable knowledge and understanding of industry standards, procedures, and processes Must be able to multi-task and work to agreed schedules.
Apr 20, 2024
Full time
Key role to ensure client deliverables are provided on time, to budget and to client expectations the survey department. You will be accountable for ensuring jobs are delivery on time, within budget and to the required standard . Reporting directly to the Survey Manager. You will be responsible for: Provide daily support to the Surveyors. Provide effective utilisation of labour and equipment, including servicing and calibration. Communicate with the onshore Engineering team to ensure scope is fully understood. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management. Undertake any other general duties that may be requested. Leadership Activities Drive a culture of WeChallenge. Ensure a robust onboarding process is deployed for all personnel - with specific focus on new starts. Active participation to ensure team have current and active objectives and development plans in place. Supporting 'Exchange Zones' roll-out and deployment across business area. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management Survey Supervisor (day to day focus of team) Check and deliver key site information obtained by the surveyors to support the preparation of engineering documents to support the delivery of client. The above shall be achieved by application of competent technical knowledge and experienced gained via qualification and experience and will involve preparation of the following, but not limited to: - Site Sketches Dimension Control Scan Data Validation of proposed modifications Scan Databases Existing Isometrics Provide effective utilisation of labour and equipment, including servicing and calibration. Assist engineering where necessary understanding scopes, queries related directly to deliverables. Provide effective support for the Line Manager as and when required. What skills & experience you'll bring to us HNC/HND in Mechanical Engineering and/or complimentary/eqv qualification(s) Experience of Dimensional Control techniques, software, and equipment. Experience in Offshore Design Site Survey (Piping/Structural) Basic constructability knowledge and awareness Strong communicator, written and verbal. Working and demonstrable knowledge and understanding of industry standards, procedures, and processes Must be able to multi-task and work to agreed schedules.
Field Engineer Trainee (Graduate) Aberdeen Offshore Competitive Benefits Package + Fast Track Career Progression + Market-Leading Training Program Are you a recent graduate in Mechanical or Electrical Engineering, or soon to graduate in 2024 • A unique opportunity has become available with a global energy technology company, for a talented Engineering graduate to join the team. In this role, you will be fully trained up to become a Field Engineer, operating and supervise offshore Subsea Landing String jobs of increasing complexity. As part of our Field Engineer program, your progression will be fast-tracked, with a view to moving into senior onshore and management roles within the business. You'll be part of a supportive team environment, with extensive on-the-job mentoring, as well as the opportunity to attend training courses at our international training school. What's on Offer: Comprehensive training program designed to hone your technical and operational skills, elevating your proficiency in landing strings operations. Mentorship from industry professionals, providing guidance and support as you navigate your career path. Unlimited opportunities for career advancement, enabling you to progress to senior roles and beyond. Competitive compensation package and comprehensive health insurance & pension benefits, ensuring your well-being and financial security. Role Overview Develop the technical and supervisory skills to install and operate landing strings and associated tooling as required. Ensure all job deliverables are accurate and delivered on time. Participate in job risk analysis and continuous improvement initiatives. Assist the Design/Technical Engineer to implement technical programs and bids. Ensure company and regulatory standard compliance through self-assessments, and wellsite inspections. Requirements Bachelor's or master's degree in Mechanical, Electronic or Electrical Engineering Good verbal and written communication skills Quick learner able to use logic to solve problems. Be personally committed to continuous improvement. SLB is an equal opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law.
Apr 20, 2024
Full time
Field Engineer Trainee (Graduate) Aberdeen Offshore Competitive Benefits Package + Fast Track Career Progression + Market-Leading Training Program Are you a recent graduate in Mechanical or Electrical Engineering, or soon to graduate in 2024 • A unique opportunity has become available with a global energy technology company, for a talented Engineering graduate to join the team. In this role, you will be fully trained up to become a Field Engineer, operating and supervise offshore Subsea Landing String jobs of increasing complexity. As part of our Field Engineer program, your progression will be fast-tracked, with a view to moving into senior onshore and management roles within the business. You'll be part of a supportive team environment, with extensive on-the-job mentoring, as well as the opportunity to attend training courses at our international training school. What's on Offer: Comprehensive training program designed to hone your technical and operational skills, elevating your proficiency in landing strings operations. Mentorship from industry professionals, providing guidance and support as you navigate your career path. Unlimited opportunities for career advancement, enabling you to progress to senior roles and beyond. Competitive compensation package and comprehensive health insurance & pension benefits, ensuring your well-being and financial security. Role Overview Develop the technical and supervisory skills to install and operate landing strings and associated tooling as required. Ensure all job deliverables are accurate and delivered on time. Participate in job risk analysis and continuous improvement initiatives. Assist the Design/Technical Engineer to implement technical programs and bids. Ensure company and regulatory standard compliance through self-assessments, and wellsite inspections. Requirements Bachelor's or master's degree in Mechanical, Electronic or Electrical Engineering Good verbal and written communication skills Quick learner able to use logic to solve problems. Be personally committed to continuous improvement. SLB is an equal opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law.
Do you want to play a role in the transition to sustainable energy production? At Aker Solutions we are changemakers and accelerators. With a proud history of delivering complex projects to the oil and gas industry, we need talented individuals to help us shape the path towards a sustainable energy future. Our team in West London provide front-end studies, engineering, procurement and project management services for initiating and executing oil and gas field, HVDC, renewable energy and carbon capture developments. We are currently looking for a Principal Mechanical Engineer to strengthen the team. What will you be doing? Responsible for heavy duty rotating mechanical equipment in the pre and post-order stages, acting as the single point of contact between project and supplier. Experience with enquiry and post order activities including data sheets, material requisitions, and technical bid evaluations. Experience with large machinery including compressors, pumps, turbines and diesel generators. Execution and co-ordination of Supplier document and drawing reviews Interface coordination with other engineering disciplines and third parties. Experience with Factory Acceptance Testing of mechanical equipment and packages Preparing Equipment Lists Preparing and completing all technical documents in accordance with local authority requirements Attend co-ordination and engineering review meetings as per project requirements Sound knowledge of the relevant design codes for the design of offshore installations We think you should have: Degree qualified, Chartered Engineer Engineering design experience in the onshore/offshore oil & gas and/or renewable energy industry Significant FEED and EPC experience More reasons to work with us: Professional development and career opportunities Competitive pay and benefits Healthy work-life balance Join a company committed to becoming a significant player in the energy transition Interested? Contact us. For more information about the position, please contact Laura Mansell, Senior Manager:email NES Advantage is Aker Solutions' global recruitment services provider responsible for permanent and temporary staffing service. Diversity and Inclusion Aker Solutions is empowered by its diverse workforce. We ensure a good working environment where equal opportunity, diversity and inclusion are considered vital to our success. We believe diversity creates value, attracts talent, and makes life more interesting. We therefore encourage and welcome applications from diverse backgrounds related to race, religion, nationality, sexual orientation, gender, ethnicity, disability, age, and more. This is Aker Solutions Aker Solutions delivers integrated solutions, products and services to the global energy industry. We enable low-carbon oil and gas production and develop renewable solutions to meet future energy needs. By combining innovative digital solutions and predictable project execution we accelerate the transition to sustainable energy production. Aker Solutions employs approximately 15,000 people in more than 20 countries.
Apr 20, 2024
Full time
Do you want to play a role in the transition to sustainable energy production? At Aker Solutions we are changemakers and accelerators. With a proud history of delivering complex projects to the oil and gas industry, we need talented individuals to help us shape the path towards a sustainable energy future. Our team in West London provide front-end studies, engineering, procurement and project management services for initiating and executing oil and gas field, HVDC, renewable energy and carbon capture developments. We are currently looking for a Principal Mechanical Engineer to strengthen the team. What will you be doing? Responsible for heavy duty rotating mechanical equipment in the pre and post-order stages, acting as the single point of contact between project and supplier. Experience with enquiry and post order activities including data sheets, material requisitions, and technical bid evaluations. Experience with large machinery including compressors, pumps, turbines and diesel generators. Execution and co-ordination of Supplier document and drawing reviews Interface coordination with other engineering disciplines and third parties. Experience with Factory Acceptance Testing of mechanical equipment and packages Preparing Equipment Lists Preparing and completing all technical documents in accordance with local authority requirements Attend co-ordination and engineering review meetings as per project requirements Sound knowledge of the relevant design codes for the design of offshore installations We think you should have: Degree qualified, Chartered Engineer Engineering design experience in the onshore/offshore oil & gas and/or renewable energy industry Significant FEED and EPC experience More reasons to work with us: Professional development and career opportunities Competitive pay and benefits Healthy work-life balance Join a company committed to becoming a significant player in the energy transition Interested? Contact us. For more information about the position, please contact Laura Mansell, Senior Manager:email NES Advantage is Aker Solutions' global recruitment services provider responsible for permanent and temporary staffing service. Diversity and Inclusion Aker Solutions is empowered by its diverse workforce. We ensure a good working environment where equal opportunity, diversity and inclusion are considered vital to our success. We believe diversity creates value, attracts talent, and makes life more interesting. We therefore encourage and welcome applications from diverse backgrounds related to race, religion, nationality, sexual orientation, gender, ethnicity, disability, age, and more. This is Aker Solutions Aker Solutions delivers integrated solutions, products and services to the global energy industry. We enable low-carbon oil and gas production and develop renewable solutions to meet future energy needs. By combining innovative digital solutions and predictable project execution we accelerate the transition to sustainable energy production. Aker Solutions employs approximately 15,000 people in more than 20 countries.
Position: Mechanical Internal Project Manager / Assitant Mechanical Contracts Manager Location: Wolverhamton / Nationwide Travel Required Salary Range: 40,000 - 50,000 plus benefits Position Type: Full Time, Permanent JOB PURPOSE: The Internal Project Manager, reporting to the Senior and Mechanical Project Manager, will be responsible for working on projects nationwide, ranging from small retail to large commercial ventures. The primary objective is to fully prepare and cost jobs for timely handover. REPORTING TO: Senior Project Manager and Project Manager KEY DUTIES AND RESPONSIBILITIES: Analyze project specifications, drawings, and related documents to determine scope of work and required materials. Collaborate with project managers, engineers, and suppliers to gather necessary information for accurate estimations. Prepare comprehensive cost estimates covering labor, materials, equipment, and subcontractor costs. Review and assess bids and quotes from suppliers to secure competitive pricing. Assist in crafting project proposals and budgets. Maintain and update a database of cost estimates and historical project data. Communicate and present estimates to project teams and clients. Prepare risk assessments and method statements. GENERAL: Contribute to the overall ethos/aims of the business. Participate in training, learning activities, and performance development as required. Adhere to company policies and procedures relating to health and safety, equal opportunities, security, confidentiality, and data protection. PERSON SPECIFICATION Criteria (Essential) Knowledge, Understanding and Experience: Proven technical experience as an estimator/project manager in the mechanical industry. Understanding of M&E design, installation techniques, and safety standards. Excellent analytical and problem-solving skills. Proficiency in using estimating software and tools. Strong communication and negotiation skills. Attention to detail and high level of accuracy. Ability to work independently and collaboratively as part of a team. Qualifications: Degree or HNC/HND in Building Services (or equivalent technical experience). Skills and abilities: Self-starter. Positive attitude in all dealings. Commercial awareness. Organized and structured in planning approach. Strong attention to detail for quality and H&S processes. Innovative and forward-thinking approach. Full UK driving license. Personal Qualities and Attributes: Able to work without distraction. Self-motivated. Able to use initiative. Professional and respectful approach. Hardworking, flexible, and reliable. Committed to continuous self-improvement. Good personal organization, honesty, communication, ownership, reliability, and dependability.
Apr 20, 2024
Full time
Position: Mechanical Internal Project Manager / Assitant Mechanical Contracts Manager Location: Wolverhamton / Nationwide Travel Required Salary Range: 40,000 - 50,000 plus benefits Position Type: Full Time, Permanent JOB PURPOSE: The Internal Project Manager, reporting to the Senior and Mechanical Project Manager, will be responsible for working on projects nationwide, ranging from small retail to large commercial ventures. The primary objective is to fully prepare and cost jobs for timely handover. REPORTING TO: Senior Project Manager and Project Manager KEY DUTIES AND RESPONSIBILITIES: Analyze project specifications, drawings, and related documents to determine scope of work and required materials. Collaborate with project managers, engineers, and suppliers to gather necessary information for accurate estimations. Prepare comprehensive cost estimates covering labor, materials, equipment, and subcontractor costs. Review and assess bids and quotes from suppliers to secure competitive pricing. Assist in crafting project proposals and budgets. Maintain and update a database of cost estimates and historical project data. Communicate and present estimates to project teams and clients. Prepare risk assessments and method statements. GENERAL: Contribute to the overall ethos/aims of the business. Participate in training, learning activities, and performance development as required. Adhere to company policies and procedures relating to health and safety, equal opportunities, security, confidentiality, and data protection. PERSON SPECIFICATION Criteria (Essential) Knowledge, Understanding and Experience: Proven technical experience as an estimator/project manager in the mechanical industry. Understanding of M&E design, installation techniques, and safety standards. Excellent analytical and problem-solving skills. Proficiency in using estimating software and tools. Strong communication and negotiation skills. Attention to detail and high level of accuracy. Ability to work independently and collaboratively as part of a team. Qualifications: Degree or HNC/HND in Building Services (or equivalent technical experience). Skills and abilities: Self-starter. Positive attitude in all dealings. Commercial awareness. Organized and structured in planning approach. Strong attention to detail for quality and H&S processes. Innovative and forward-thinking approach. Full UK driving license. Personal Qualities and Attributes: Able to work without distraction. Self-motivated. Able to use initiative. Professional and respectful approach. Hardworking, flexible, and reliable. Committed to continuous self-improvement. Good personal organization, honesty, communication, ownership, reliability, and dependability.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Apr 20, 2024
Contractor
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have a very exciting opportunity for an experienced Project Engineer (Senior Design Engineer) to join the team in Altens, Aberdeen. The Project Engineer is responsible for design of new products and makes improvements to existing products. Performs complex tasks and fulfils broad responsibilities where required outcomes are defined, but methods and procedures may vary based on precedent or professional judgment. Considerable latitude for unreviewed action. Confers with supervisor on unusual matters. Coordinates the work of others on projects and may assign work to and assist less experienced professionals or support staff. DUTIES & RESPONSIBILITIES: OPERATIONAL Provides technical authority and support of our global technical sales and operations teams business pursuit and associated support functions, inclusive of customer facing activities. Prepares detailed design proposals, schedules and cost estimates for assigned projects. Ensures technical input specifications are documented clearly and any changes are managed formally. Executes engineering projects; on time, on budget with respect to input specification and planning. Designs for manufacture via collaboration with manufacturing, ensuring product cost targets are met. Prepares new and existing product design packages in alignment with process, ensuring standards and requirements are met, maintained and sustained. Leads and attends cross functional and customer design reviews for new and existing products. Produces, develops, maintains, sustains standardized engineering data and documentation. Proactively engages and constructively contributes to the activities, deliverables and development of others. Checks and approves product design packages and associated engineering data and documentation of others. Proactively supports the standardization of best practices and solutions. Leads, plans and prepares product test protocols and procedures. Produces, develops, maintains and sustains high quality technical documentation to support other functions engagement and quality of services on associated products. Prepares detailed technical reports as necessary to support internal and external customer communications and understanding of events. Prepares, maintains and sustains product technical and commercial test summary data, ensuring; customer, regulatory and Weatherford planned protocols are complete and transparent. Dispositions NCR's, supports CPAR's and associated root cause analysis. Provides manual assistance in the process of assembly & testing of new and existing products. Identifies any opportunities for improvement (OFI) regarding design, planning and associated processes. Proactively trains, develops and supports global roofline teams via the delivery of effective training and competency content associated with new products. Ensures product data, documentation and associated toolboxes are clean, standardized and ready to support efficient supply chain and field operations. Supports the development of operationally running procedures, FMECA's, HAZOPS in support of associated products service delivery excellence. Proactively supports technology transfer and associated management of change (MoC) projects. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Contribute to safety meetings & culture. Report task specific and area risk assessments. Develop and maintain procedures and work instructions ensuring full compliance to HSE and quality expectations. Train and develop in accordance with defined training structure and competency system. FINANCE Responsible for the project cost planning and control and project level. Responsible for product cost outcomes. Responsible for the planning and assessment of cost implications of design changes or new designs, informing projected costs to line management On time, on budget delivery for all assigned projects. Responsible for reporting of monthly planned v actual progress of assigned projects. Qualifications 5-10 years related relevant industry experience - should have experience in designing and testing downhole tools. Must have Engineering Degree and demonstrated practical knowledge and work experience. Experience in product realization and commercialization processes at a Project Engineer level. Working knowledge of 3D CAD and associated engineering systems. Proficient user of Microsoft Office applications. Working knowledge of mechanical engineering practices, standards, specifications and regulations particularly related to the oil and gas industry. Experience with completion services and products. A bias for process discipline and an established track record of executing to plan and achieving results. Experience in technology transfer and the development of others. Excellent communication, interpersonal and organisational skills. Able and willing to push through constraints in an engaging and collaborative manner. Must possess effective technical leadership and assertiveness skills as well as proficient communication skills, both verbal and written. Committed to providing a quality product and service to internal and external customers. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi-functional environment. Ability to function effectively under pressure throughout busy periods. Availability to travel as necessary is essential.
Apr 20, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have a very exciting opportunity for an experienced Project Engineer (Senior Design Engineer) to join the team in Altens, Aberdeen. The Project Engineer is responsible for design of new products and makes improvements to existing products. Performs complex tasks and fulfils broad responsibilities where required outcomes are defined, but methods and procedures may vary based on precedent or professional judgment. Considerable latitude for unreviewed action. Confers with supervisor on unusual matters. Coordinates the work of others on projects and may assign work to and assist less experienced professionals or support staff. DUTIES & RESPONSIBILITIES: OPERATIONAL Provides technical authority and support of our global technical sales and operations teams business pursuit and associated support functions, inclusive of customer facing activities. Prepares detailed design proposals, schedules and cost estimates for assigned projects. Ensures technical input specifications are documented clearly and any changes are managed formally. Executes engineering projects; on time, on budget with respect to input specification and planning. Designs for manufacture via collaboration with manufacturing, ensuring product cost targets are met. Prepares new and existing product design packages in alignment with process, ensuring standards and requirements are met, maintained and sustained. Leads and attends cross functional and customer design reviews for new and existing products. Produces, develops, maintains, sustains standardized engineering data and documentation. Proactively engages and constructively contributes to the activities, deliverables and development of others. Checks and approves product design packages and associated engineering data and documentation of others. Proactively supports the standardization of best practices and solutions. Leads, plans and prepares product test protocols and procedures. Produces, develops, maintains and sustains high quality technical documentation to support other functions engagement and quality of services on associated products. Prepares detailed technical reports as necessary to support internal and external customer communications and understanding of events. Prepares, maintains and sustains product technical and commercial test summary data, ensuring; customer, regulatory and Weatherford planned protocols are complete and transparent. Dispositions NCR's, supports CPAR's and associated root cause analysis. Provides manual assistance in the process of assembly & testing of new and existing products. Identifies any opportunities for improvement (OFI) regarding design, planning and associated processes. Proactively trains, develops and supports global roofline teams via the delivery of effective training and competency content associated with new products. Ensures product data, documentation and associated toolboxes are clean, standardized and ready to support efficient supply chain and field operations. Supports the development of operationally running procedures, FMECA's, HAZOPS in support of associated products service delivery excellence. Proactively supports technology transfer and associated management of change (MoC) projects. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Contribute to safety meetings & culture. Report task specific and area risk assessments. Develop and maintain procedures and work instructions ensuring full compliance to HSE and quality expectations. Train and develop in accordance with defined training structure and competency system. FINANCE Responsible for the project cost planning and control and project level. Responsible for product cost outcomes. Responsible for the planning and assessment of cost implications of design changes or new designs, informing projected costs to line management On time, on budget delivery for all assigned projects. Responsible for reporting of monthly planned v actual progress of assigned projects. Qualifications 5-10 years related relevant industry experience - should have experience in designing and testing downhole tools. Must have Engineering Degree and demonstrated practical knowledge and work experience. Experience in product realization and commercialization processes at a Project Engineer level. Working knowledge of 3D CAD and associated engineering systems. Proficient user of Microsoft Office applications. Working knowledge of mechanical engineering practices, standards, specifications and regulations particularly related to the oil and gas industry. Experience with completion services and products. A bias for process discipline and an established track record of executing to plan and achieving results. Experience in technology transfer and the development of others. Excellent communication, interpersonal and organisational skills. Able and willing to push through constraints in an engaging and collaborative manner. Must possess effective technical leadership and assertiveness skills as well as proficient communication skills, both verbal and written. Committed to providing a quality product and service to internal and external customers. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi-functional environment. Ability to function effectively under pressure throughout busy periods. Availability to travel as necessary is essential.
Electrical Design team - Expanding across multiple levels Your new company Our client is a well-established Building Services consultancy based in Glasgow, Blackburn and London. The company has 700 staff across the UK with the current electrical team of 23 looking to double in size to 46 over the next 5 years. Their team of highly-qualified mechanical and electrical engineers have many years of experience in all aspects of Building Services engineering: from preliminary planning and construction management to supplementary services upon completion. Their clients operate throughout the industrial, commercial and residential sectors. Work includes commercial offices, student accommodation, distilleries and more. This is a great opportunity for Junior (Grad+2), Intermediate, Engineer and Senior Engineers to join a well-established practice that can offer you the access and support you need to aid your learning and development. At Engineer and Senior + levels, you will be expected to run your own projects, working through the RIBA stages (2-6). The office has a relaxed, flexible culture and regular social incentives take place. Your new role You'll play a key part in the Electrical Design team and will have the opportunity to lead projects and mentor junior team members. Your key responsibilities will include: Designing and developing electrical systems for Building Services projects.Preparing technical reports and specifications.Ensuring compliance with relevant regulations and standards.Collaborating with other engineers and architects.Mentoring junior team members What you'll need to succeed Bachelor's / Master's degree in Electrical Engineering or a related field.Working / Strong knowledge of electrical systems and building codes.Excellent communication and collaboration skills.The ability to work independently and as part of a team.Bachelor's / Master's degree in Electrical Engineering or a related field.Strong knowledge of electrical systems and building codes.Excellent communication and collaboration skills.The ability to work independently and as part of a team. What you'll get in return You'll be paid a competitive salary, along with a range of benefits. You'll benefit from a relaxed working culture, where you'll be given the autonomy to manage your own diary and have complete flexibility over your working week. You'll be given the support required to progress professionally and will be given a clear route to progress within the consultancy. There are 25 days' leave (+BH) with the ability to buy 5 more at the start of each financial year. For Senior Engineers and above, the company offers a £5 - £6.5k car allowance. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. #
Apr 20, 2024
Full time
Electrical Design team - Expanding across multiple levels Your new company Our client is a well-established Building Services consultancy based in Glasgow, Blackburn and London. The company has 700 staff across the UK with the current electrical team of 23 looking to double in size to 46 over the next 5 years. Their team of highly-qualified mechanical and electrical engineers have many years of experience in all aspects of Building Services engineering: from preliminary planning and construction management to supplementary services upon completion. Their clients operate throughout the industrial, commercial and residential sectors. Work includes commercial offices, student accommodation, distilleries and more. This is a great opportunity for Junior (Grad+2), Intermediate, Engineer and Senior Engineers to join a well-established practice that can offer you the access and support you need to aid your learning and development. At Engineer and Senior + levels, you will be expected to run your own projects, working through the RIBA stages (2-6). The office has a relaxed, flexible culture and regular social incentives take place. Your new role You'll play a key part in the Electrical Design team and will have the opportunity to lead projects and mentor junior team members. Your key responsibilities will include: Designing and developing electrical systems for Building Services projects.Preparing technical reports and specifications.Ensuring compliance with relevant regulations and standards.Collaborating with other engineers and architects.Mentoring junior team members What you'll need to succeed Bachelor's / Master's degree in Electrical Engineering or a related field.Working / Strong knowledge of electrical systems and building codes.Excellent communication and collaboration skills.The ability to work independently and as part of a team.Bachelor's / Master's degree in Electrical Engineering or a related field.Strong knowledge of electrical systems and building codes.Excellent communication and collaboration skills.The ability to work independently and as part of a team. What you'll get in return You'll be paid a competitive salary, along with a range of benefits. You'll benefit from a relaxed working culture, where you'll be given the autonomy to manage your own diary and have complete flexibility over your working week. You'll be given the support required to progress professionally and will be given a clear route to progress within the consultancy. There are 25 days' leave (+BH) with the ability to buy 5 more at the start of each financial year. For Senior Engineers and above, the company offers a £5 - £6.5k car allowance. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. #
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Apr 20, 2024
Contractor
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Senior Mechanical Designer I'm working on an exciting contract opportunity for a Senior Mechanical Designer in Barrow-in-Furness on 12 month contracts. Hourly Rates Local (within 40 miles of location) - £29.19 per hour, rising to £31.28 after 24 months. Non-Local (over 40 miles of location) - £39.74 per hour, rising to £41.83 after 24 months An understanding CAD toolsets and techniques like Foran, CADDS5, AutoCAD, Solidworks, Tribon. and Siemens NX for both 2D and 3D outputs (drawings and models). Other transferable CAD skills and knowledge are welcomed. The ideal candidate will also have experience and familiarity with PLM toolsets such as Teamcenter, Database Manager, and Windchill. Senior Designer - Mechanical As a Senior Designer - Mechanical, you'll have experience using the CAD toolset to produce 3D models of mechanical routed systems (pipe and or HVAC) and mechanical equipment integration eg pumps and valves. Additionally, mature and develop 2D mechanical schematics and system diagrams. Please note that you'll be required to undergo SC Clearance. If you would like to be considered for this role please don t hesitate to click apply or call Daniel McShane for more information.
Apr 20, 2024
Contractor
Senior Mechanical Designer I'm working on an exciting contract opportunity for a Senior Mechanical Designer in Barrow-in-Furness on 12 month contracts. Hourly Rates Local (within 40 miles of location) - £29.19 per hour, rising to £31.28 after 24 months. Non-Local (over 40 miles of location) - £39.74 per hour, rising to £41.83 after 24 months An understanding CAD toolsets and techniques like Foran, CADDS5, AutoCAD, Solidworks, Tribon. and Siemens NX for both 2D and 3D outputs (drawings and models). Other transferable CAD skills and knowledge are welcomed. The ideal candidate will also have experience and familiarity with PLM toolsets such as Teamcenter, Database Manager, and Windchill. Senior Designer - Mechanical As a Senior Designer - Mechanical, you'll have experience using the CAD toolset to produce 3D models of mechanical routed systems (pipe and or HVAC) and mechanical equipment integration eg pumps and valves. Additionally, mature and develop 2D mechanical schematics and system diagrams. Please note that you'll be required to undergo SC Clearance. If you would like to be considered for this role please don t hesitate to click apply or call Daniel McShane for more information.
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: £35,720 - £51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
Apr 20, 2024
Full time
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: £35,720 - £51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
Stantec have an exciting opportunity for a Senior to Principal Electrical Engineer to join our dynamic multidisciplinary Building Services team in Reading or London. We are excited to announce that our project portfolio is expanding rapidly and we have has been selected to provide integrated design services for Agratas, Tata Group's global battery business, who are building a major battery cell manufacturing facility on theGravity Smart Campus in Bridgewater. Therefore, we are looking for experienced professionals to join our team and help us achieve our growth goals. Joining an established team of Engineers, this is a unique opportunity to work in a truly integrated environment that has been structured to respond to the future demands of the construction industry. Our engineering teams within Stantec work together to deliver building solutions utilising BIM and the latest industry technology. You will join an established team of engineers who are passionate about creating sustainable and resilient building. For more info on our Building Services projects and team, please click on the link:- Stantec Building Services You will be an integral part of leading a project team to deliver on multidisciplinary building services and environmental design projects. You will support and oversee projects with our clients to develop a detailed brief and produce reports for mechanical building services requirements, produce outline design, scheme design, and detailed design reports including drawings and specifications and integrate the demands of sustainability and carbon emission reduction strategy into our projects. You will be responsible for the supervision of an expanding team, including allocating workload, checking, and reviewing outputs, evaluating progress against time and budget constraints, as well as providing mentorship to junior staff and aiding in career development. This is a key role within our team and there will be ample scope to grow and develop your personal profile and learn new skills along the way to further your career. About You You will hold a degree in a relevant discipline such as Electrical Engineering, Building Services Engineering or similar, and Chartered with a relevant institution IET/CIBSE. You will have a proven track record in an M&E team ideally gained within a design engineering consultancy. You will also have the necessary skills and experience to liaise with a broad range of stakeholders where you will be working closely with clients, and other professional staff across multi-disciplinary business groups. You will have in depth knowledge and expertise in the design of electrical engineering services, including systems and equipment design, calculations and drawing production as well as an understanding of design tools such as Revit and IES. You will have knowledge and understanding of the wider built environment and the associated design influences, coupled with understanding of the legislative environment including carbon emissions reduction and sustainability. You will have an appreciation and experience of Technical Standards, planning policies and relevant British Standards and Building Regulations. WHY JOIN US? Our People Culture: We're proud of our friendly and collaborative environment Awards: We're 2023 NCE Consultancy of the Year and top 10 Corporate Knights most sustainable companies in the world. Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Great Projects in all of our sectors across the UK&I Industry leading training and development as well as paid for professional subscriptions About Stantec Stantec is a professional services firm. Our team of 28,000 global experts provides engineering, architecture, environmental, and project management services across all phases of the project life cycle. We're designers, engineers, scientists, and project managers, innovating together at the intersection of community, creativity, and client relationships. Balancing these priorities results in projects that advance the quality of life in communities across the globe. From large-scale developments to challenging neighbourhood projects, we stretch across our global network to learn from others, offer our support, and gain new experiences along the way. So while we work to help the communities around us thrive, our own people thrive too. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team. ReqID: 5256
Apr 19, 2024
Full time
Stantec have an exciting opportunity for a Senior to Principal Electrical Engineer to join our dynamic multidisciplinary Building Services team in Reading or London. We are excited to announce that our project portfolio is expanding rapidly and we have has been selected to provide integrated design services for Agratas, Tata Group's global battery business, who are building a major battery cell manufacturing facility on theGravity Smart Campus in Bridgewater. Therefore, we are looking for experienced professionals to join our team and help us achieve our growth goals. Joining an established team of Engineers, this is a unique opportunity to work in a truly integrated environment that has been structured to respond to the future demands of the construction industry. Our engineering teams within Stantec work together to deliver building solutions utilising BIM and the latest industry technology. You will join an established team of engineers who are passionate about creating sustainable and resilient building. For more info on our Building Services projects and team, please click on the link:- Stantec Building Services You will be an integral part of leading a project team to deliver on multidisciplinary building services and environmental design projects. You will support and oversee projects with our clients to develop a detailed brief and produce reports for mechanical building services requirements, produce outline design, scheme design, and detailed design reports including drawings and specifications and integrate the demands of sustainability and carbon emission reduction strategy into our projects. You will be responsible for the supervision of an expanding team, including allocating workload, checking, and reviewing outputs, evaluating progress against time and budget constraints, as well as providing mentorship to junior staff and aiding in career development. This is a key role within our team and there will be ample scope to grow and develop your personal profile and learn new skills along the way to further your career. About You You will hold a degree in a relevant discipline such as Electrical Engineering, Building Services Engineering or similar, and Chartered with a relevant institution IET/CIBSE. You will have a proven track record in an M&E team ideally gained within a design engineering consultancy. You will also have the necessary skills and experience to liaise with a broad range of stakeholders where you will be working closely with clients, and other professional staff across multi-disciplinary business groups. You will have in depth knowledge and expertise in the design of electrical engineering services, including systems and equipment design, calculations and drawing production as well as an understanding of design tools such as Revit and IES. You will have knowledge and understanding of the wider built environment and the associated design influences, coupled with understanding of the legislative environment including carbon emissions reduction and sustainability. You will have an appreciation and experience of Technical Standards, planning policies and relevant British Standards and Building Regulations. WHY JOIN US? Our People Culture: We're proud of our friendly and collaborative environment Awards: We're 2023 NCE Consultancy of the Year and top 10 Corporate Knights most sustainable companies in the world. Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Great Projects in all of our sectors across the UK&I Industry leading training and development as well as paid for professional subscriptions About Stantec Stantec is a professional services firm. Our team of 28,000 global experts provides engineering, architecture, environmental, and project management services across all phases of the project life cycle. We're designers, engineers, scientists, and project managers, innovating together at the intersection of community, creativity, and client relationships. Balancing these priorities results in projects that advance the quality of life in communities across the globe. From large-scale developments to challenging neighbourhood projects, we stretch across our global network to learn from others, offer our support, and gain new experiences along the way. So while we work to help the communities around us thrive, our own people thrive too. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team. ReqID: 5256
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Apr 19, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Job Title: Electrical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Electrical Engineering Intern is responsible to assist/work to provide innovative and cost-effective engineering solutions that will improve or sustain electronic tools/products performance and reliability. You will apply electrical engineering skills to analyse, design and develop electronic board, tools and/or test system. The development progression will include design reviews/presentation, prototyping, system integration, qualification tests and documentation. Within a multi-disciplinary team, you will collaborate with other experts (electrical engineers, software engineers, mechanical engineers, physicists, designers, etc.) to execute the achieve projects objectives. You will also perform technical planning for introduction of these changes in the field, test and validation, authoring of functional specifications, and contribute to the development of new principles and concepts. Deliverables: • Perform calculation/simulations to validate designs • Develop electronic board and assemblies • Develop test system hardware/software/scripts for automated testing • Involve in data analytic projects • Work with senior engineers to write and to release engineering documents • Present work progress, study, findings and design in technical reviews Required Skills: • Good oral and written communication skills • Good motivation, autonomy, teamwork, and ingenuity • Positive attitude and aptitude to learn on the job • Ability to read and interpret electronic schematic • Experience with various electronic test instruments (oscilloscope, power supply, multimeter, etc) • Exposure to electrical and other simulation software (PSPICE, LTSpice, TiNA) • Hands on experience with soldering and circuit testing • Ability to work in a team and with strong service and quality focus Exposure to any of the following would be a plus; - Matlab, SciLab, Octave, LabView, any eCAD software Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Electrical Engineering or a related discipline . SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Apr 19, 2024
Full time
Job Title: Electrical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Electrical Engineering Intern is responsible to assist/work to provide innovative and cost-effective engineering solutions that will improve or sustain electronic tools/products performance and reliability. You will apply electrical engineering skills to analyse, design and develop electronic board, tools and/or test system. The development progression will include design reviews/presentation, prototyping, system integration, qualification tests and documentation. Within a multi-disciplinary team, you will collaborate with other experts (electrical engineers, software engineers, mechanical engineers, physicists, designers, etc.) to execute the achieve projects objectives. You will also perform technical planning for introduction of these changes in the field, test and validation, authoring of functional specifications, and contribute to the development of new principles and concepts. Deliverables: • Perform calculation/simulations to validate designs • Develop electronic board and assemblies • Develop test system hardware/software/scripts for automated testing • Involve in data analytic projects • Work with senior engineers to write and to release engineering documents • Present work progress, study, findings and design in technical reviews Required Skills: • Good oral and written communication skills • Good motivation, autonomy, teamwork, and ingenuity • Positive attitude and aptitude to learn on the job • Ability to read and interpret electronic schematic • Experience with various electronic test instruments (oscilloscope, power supply, multimeter, etc) • Exposure to electrical and other simulation software (PSPICE, LTSpice, TiNA) • Hands on experience with soldering and circuit testing • Ability to work in a team and with strong service and quality focus Exposure to any of the following would be a plus; - Matlab, SciLab, Octave, LabView, any eCAD software Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Electrical Engineering or a related discipline . SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies, providing impartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you. We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets. At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Apr 19, 2024
Full time
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies, providing impartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you. We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets. At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Job Title: Mechanical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Development of a new product is a complex process involving review of variable concepts. At any stage of the design the actual testing of the concept is very beneficial to access the capability of the design. This internship involves testing of the concepts and review of the results in contexts of the large project. You will be working alongside Senior Mechanical and Electrical Engineers learning the variety of the subjects, for example: concept identification, design assessment, testing set-up, data processing etc. Your responsibilities will be clearly defined however not limited to the scope of the internship (you can choose to be involved in other parts of the project or in general activities of the centre). Deliverables: Learning and using a wide variety of engineering skills to deliver a design of a system which is capable of withstanding the harsh downhole environment. Developed skills include: CAD Software FEA Structural Analysis Technical Drawings 3D Printing Required Skills: Good oral & written skills Motivated & a team player Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Mechanical Eningeering or a related discipline. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Apr 19, 2024
Full time
Job Title: Mechanical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Development of a new product is a complex process involving review of variable concepts. At any stage of the design the actual testing of the concept is very beneficial to access the capability of the design. This internship involves testing of the concepts and review of the results in contexts of the large project. You will be working alongside Senior Mechanical and Electrical Engineers learning the variety of the subjects, for example: concept identification, design assessment, testing set-up, data processing etc. Your responsibilities will be clearly defined however not limited to the scope of the internship (you can choose to be involved in other parts of the project or in general activities of the centre). Deliverables: Learning and using a wide variety of engineering skills to deliver a design of a system which is capable of withstanding the harsh downhole environment. Developed skills include: CAD Software FEA Structural Analysis Technical Drawings 3D Printing Required Skills: Good oral & written skills Motivated & a team player Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Mechanical Eningeering or a related discipline. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Apr 19, 2024
Contractor
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have design delivery experience, involving conceptual designs and FEED of complex process facilities and plant design? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Apr 19, 2024
Contractor
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Apr 19, 2024
Full time
Location: Cambridge We're seeking an experienced Lead Mechatronic Engineer to spearhead the development of our autonomous harvesting robot. In this role, you'll design, build, and test prototypes, ensuring the system's robustness and manufacturability for market readiness. Responsibilities: Lead the design and development of the robotic platform for precision harvesting. Integrate sensors, electronics, software, and electromechanical devices into cost-effective designs. Collaborate with cross-functional teams on system integration and manufacturing processes. Conduct field trials and validation at grower sites. Manage projects, partnerships, and suppliers to meet timelines and budgets. Present technical reports and updates to senior leadership. Oversee CAD and PDM infrastructure, providing training and support. Qualifications/Experience: Degree in Mechatronic Engineering or equivalent. 5+ years of product development experience in robotics or manufacturing. Expertise in SolidWorks, Altium, and the full product development life cycle. Proficient in 3D CAD modelling, tolerance analysis, and design for manufacturability. Ability to lead projects, interpret customer needs, and translate requirements. Skilled in managing multiple projects, deadlines, and priorities. Experience with design for manufacturing principles and FEA (preferred). Familiarity with robot arm actuators, end-effectors/grippers, and soft robotics. Strong problem-solving, analytical, and organizational skills. Excellent team player with the ability to work autonomously. Proficient in MS Office tools Job Types: Full-time, Permanent
Senior Mechanical Building Services Engineer Your new company Your new company is a UK wide multidisciplinary, with offices based in London, Manchester and Glasgow with 200 staff across all three regions. Their Manchester office is located in a bustling part of Manchester's city centre, close to public transport hubs and car parks. The office is open planned, modern and spacious with a boardroom, kitchen and reception area. The company is currently working on multiple schemes including: Eden - New Bailey/ Well Street - Trinity Bay, which will be the biggest green wall in Europe/ Water lane in Leeds - 200 bed 5 hotel/ New office designs across the UK/ 47 storey residential developments/ Student accommodation in Liverpool/ Student accommodation in Leeds/ Labs in Cambridge/ Vertical farming facilities. Your new role Your new role will see you working as a senior engineer on the multiple schemes mentioned above using your design software experience, mentoring junior staff with their designs and adding your input on meeting regarding wider schemes. What you'll need to succeed To succeed in this role you will have a minimum of 4 years' UK experience, a degree in Mechanical Engineering or Building Services and have a solid knowledge of design software and experience working in the above-mentioned sectors. What you'll get in return In return, you will receive a highly competitive salary, 25 days' leave - The ability to get an extra weeks' leave for working 4 days a week from the office or a normal 3 days working from the office. You will receive full support towards chartership and mentoring throughout your career working for a respected consultancy who have monthly socials and a solid community culture. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Apr 19, 2024
Full time
Senior Mechanical Building Services Engineer Your new company Your new company is a UK wide multidisciplinary, with offices based in London, Manchester and Glasgow with 200 staff across all three regions. Their Manchester office is located in a bustling part of Manchester's city centre, close to public transport hubs and car parks. The office is open planned, modern and spacious with a boardroom, kitchen and reception area. The company is currently working on multiple schemes including: Eden - New Bailey/ Well Street - Trinity Bay, which will be the biggest green wall in Europe/ Water lane in Leeds - 200 bed 5 hotel/ New office designs across the UK/ 47 storey residential developments/ Student accommodation in Liverpool/ Student accommodation in Leeds/ Labs in Cambridge/ Vertical farming facilities. Your new role Your new role will see you working as a senior engineer on the multiple schemes mentioned above using your design software experience, mentoring junior staff with their designs and adding your input on meeting regarding wider schemes. What you'll need to succeed To succeed in this role you will have a minimum of 4 years' UK experience, a degree in Mechanical Engineering or Building Services and have a solid knowledge of design software and experience working in the above-mentioned sectors. What you'll get in return In return, you will receive a highly competitive salary, 25 days' leave - The ability to get an extra weeks' leave for working 4 days a week from the office or a normal 3 days working from the office. You will receive full support towards chartership and mentoring throughout your career working for a respected consultancy who have monthly socials and a solid community culture. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Imperial Recruitment Group are delighted to be recruiting for a Senior Piping Engineer on behalf of a long established multi-disciplined engineering consultancy based in Teesside. Overview: The individuals would be able to lead piping design activities, to produce both 2D and 3D designs, including GA drawings, piping isometrics and pipe support drawings. Conversant with ASME B31.3 design code requirements, industry codes of practice, standards, and relevant sections of statutory documentation applicable to piping design. The candidates should also be experienced in the Oil & Gas, Chemical, and Pharma / Food industries completing both brown field and green field designs. Job Title: Senior Piping Engineer Location: Teesside Salary: Competitive Employment Opportunity: Contract Your duties are but not limited too: Externally you will work with core clients, third party engineering consultants, manufacturing partners and suppliers. Holding virtual/face to face meetings with clients Developing and maintaining project schedule and budget Producing conceptual designs with validating calculations where required Producing detailed designs from successful concepts Producing design risk assessments and project documentation Managing design engineers Experience working with laser scan point clouds. Site surveys and report writing. Production and checking of general arrangement drawings, piping isometric drawings and pipe support drawings. Conversant with ASME B31.3 design code requirements, codes of practice, standards, and relevant sections of statutory documentation applicable to piping design. Able to create base designs and drawings from agreed work scope. Mechanical design experience is also very desirable. To be considered for this role you will have: Degree level qualified. Proven Knowledge of pipework design Extensive knowledge of pipework fabrication and fabrication practice Competent with 2D (AutoCAD) Experience leading Piping Design teams. For more information on this opportunity or for a confidential conversation please contact Yaw Ankomah at Imperial Recruitment Group.
Apr 19, 2024
Full time
Imperial Recruitment Group are delighted to be recruiting for a Senior Piping Engineer on behalf of a long established multi-disciplined engineering consultancy based in Teesside. Overview: The individuals would be able to lead piping design activities, to produce both 2D and 3D designs, including GA drawings, piping isometrics and pipe support drawings. Conversant with ASME B31.3 design code requirements, industry codes of practice, standards, and relevant sections of statutory documentation applicable to piping design. The candidates should also be experienced in the Oil & Gas, Chemical, and Pharma / Food industries completing both brown field and green field designs. Job Title: Senior Piping Engineer Location: Teesside Salary: Competitive Employment Opportunity: Contract Your duties are but not limited too: Externally you will work with core clients, third party engineering consultants, manufacturing partners and suppliers. Holding virtual/face to face meetings with clients Developing and maintaining project schedule and budget Producing conceptual designs with validating calculations where required Producing detailed designs from successful concepts Producing design risk assessments and project documentation Managing design engineers Experience working with laser scan point clouds. Site surveys and report writing. Production and checking of general arrangement drawings, piping isometric drawings and pipe support drawings. Conversant with ASME B31.3 design code requirements, codes of practice, standards, and relevant sections of statutory documentation applicable to piping design. Able to create base designs and drawings from agreed work scope. Mechanical design experience is also very desirable. To be considered for this role you will have: Degree level qualified. Proven Knowledge of pipework design Extensive knowledge of pipework fabrication and fabrication practice Competent with 2D (AutoCAD) Experience leading Piping Design teams. For more information on this opportunity or for a confidential conversation please contact Yaw Ankomah at Imperial Recruitment Group.