Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
Apr 25, 2024
Contractor
Job title: Presales Solution Engineer _ Mandarin speaking Location: Reading Overview: If you are enthusiastic about the renewable energy generation, this may be the opportunity you've been looking for. As a presales solution manager, you will be responsible for technical pre-sales of our industry leading solar PV inverter and ESS solution in the UK market. You will be an integral part of a rapidly growing team within a leading international organisation to establish, develop and close business opportunities. What you will do: Conduct technical sales routine works, including produce solution design and quotation, processing purchase order, supporting product demonstration and proof-of-concept test, etc. Take bidding responsibility as a technical lead to answer RFx, producing technical proposal, generating product solution quotation, presenting technical and commercial proposals, preparing technical related contractual clauses. Lead Go-To-Market activities to launch new product and solution into UK market, promote solar PV inverter and ESS solution to key distributors and installers by regularly delivering technical workshops and presentation. Identify client's key technical requirements and be able to drive and coordinate with internal product management, R&D, engineering team and marketing teams to ensure that these requirements are implemented in the product roadmap. Collect and analyse market and industry trend information and produce insight of latest regulation and technology development. Support account team to enhance customer relationships, to seek out, identify, develop and close business opportunities within designated customers. The ideal candidate: Good knowledge of solar PV inverters and Energy Storage System functionality, BOS and system with also strong commercial sales knowledge. 2+ years of solar power generation industry experience, hands-on experience on solar PV inverter and ESS design and installation is desirable. Product management skills: producing product & market promotion document, performing competition analysis, creating presentations of product features and benefits University degree on power electronics, electric & electronic engineering or similar subject is preferred. Communication & Learning skills: Team working spirit, self-motivated, great time-management skill, acting as a communication hub on product & solution-related matters. Combination of presenting, influencing, negotiating and relationship building skills to achieve product & solution sales success. Learning and adapting capability: learning quickly and forwardly, curiosities about new things. Others: Willingness to travel domestic on a regular basis, up to 50% travel. Occasionally international travel is required. Fluent command of written and spoken English. Chinese/Mandarin speaking is required. Project People is acting as an Employment Business in relation to this vacancy.
Commissioning Supervisor Reports to: Commissioning Manager Location: UK, remote working with regular site visits as required Contract: Permanent Salary: £60,000 - £65,000 per annum + car allowance (£650 per month) + bonus (up to 50% of salary paid annually) + benefits The Company: Ethical Power is one of Britain s most innovative and ambitious renewable energy companies. This role sits within the high-voltage infrastructure management contractor and an Independent Connections Provider (ICP) division of the business Ethical Power Connections Ltd. As a market-leading turnkey solutions providers, we design and deliver major and complex projects within the renewable energy sector. We are one of the largest utility-scale battery energy storage systems installers in the UK and have delivered over 500MW of BESS capacity. Our work culture and ethic is based on trusted relationships and leading with empathy. Our values run through everything we do which is why we have a reputation for being a great place to work! We value fresh perspectives and diverse experiences, which is why we actively seek individuals who bring unique ideas and a hunger for growth. Learning and development opportunities are available at all levels. The Role: We are looking to recruit a Commissioning Supervisor to join our growing team. Reporting to the Commissioning Manager, you will be responsible for delivery of the commissioning resource through the business portfolio, ensuring compliance to DNO standards and customer requirements. The key responsibilities of the role are: • Coordination of commissioning subcontract resource. • Coordination of SAP subcontract resource for the portfolio. • Supervision and support of subcontractors. • Construction of commissioning plans for projects. • Construction and management of QA and ITP for projects. • Review of completed project documentation. • As built drawing review and sign-off in relation to job scope. • Construction of O&M manuals in relation to job scope. • FAT test witnessing where required. • SAT test witnessing of key primary plant. • Development of company policy and best practices on wiring and electrical installation. • In emergency situations only, site commissioning works for Solar Farms grid connections up to 132kV, Battery Grid connection or combined sites, any other 11kV to 132kV grid connected projects, and any other private network projects from 11kV to 132kV. • Attendance of technical meetings to support the PM and delivery team. • Acting as a positive role model and influence to the wider team and Junior Engineers. • Providing cover for the Commissioning Manager where required. The Person: The ideal candidate will have proven Commissioning Engineer experience, together with Protection and Control Engineer experience. You will have EHV substation project delivery experience up to 132kv. UK NGET and DNO experience will also be required. You will have excellent knowledge of relevant BSEN, IEC, CIGRE, IEEE and ENA. The successful candidate will be highly organised, able to prioritise a busy workload and have an initiative-taking approach to tasks. You will be personable, professional and self-motivated with a team player attitude. Ideally, the role holder will be CEng/Ieng registered, or working towards this. A degree in Electrical and Electronics Engineering would also be beneficial. The Rewards: In return, we offer a competitive salary package of circa £60,000 to £65,000 per car allowance, annum plus company bonus scheme, Pension scheme, 25 days holiday (plus bank holidays) incremental with years of services, Employee Assistance Programme, Life Assurance, Optional Private Medical Insurance, Cycle Scheme, study support, and more, along with the opportunity to be part of a progressive and expanding business. If you feel you have the skills, knowledge, and experience, and want to be part of an ambitious and growing organisation, please apply today. Closing date for applications will be Monday 29th April 2024. TO APPLY PLEASE CLICK THE "APPLY NOW" BUTTON AND YOU WILL BE REDIRECTED TO BEGIN THE APPLICATION PROCES
Apr 25, 2024
Full time
Commissioning Supervisor Reports to: Commissioning Manager Location: UK, remote working with regular site visits as required Contract: Permanent Salary: £60,000 - £65,000 per annum + car allowance (£650 per month) + bonus (up to 50% of salary paid annually) + benefits The Company: Ethical Power is one of Britain s most innovative and ambitious renewable energy companies. This role sits within the high-voltage infrastructure management contractor and an Independent Connections Provider (ICP) division of the business Ethical Power Connections Ltd. As a market-leading turnkey solutions providers, we design and deliver major and complex projects within the renewable energy sector. We are one of the largest utility-scale battery energy storage systems installers in the UK and have delivered over 500MW of BESS capacity. Our work culture and ethic is based on trusted relationships and leading with empathy. Our values run through everything we do which is why we have a reputation for being a great place to work! We value fresh perspectives and diverse experiences, which is why we actively seek individuals who bring unique ideas and a hunger for growth. Learning and development opportunities are available at all levels. The Role: We are looking to recruit a Commissioning Supervisor to join our growing team. Reporting to the Commissioning Manager, you will be responsible for delivery of the commissioning resource through the business portfolio, ensuring compliance to DNO standards and customer requirements. The key responsibilities of the role are: • Coordination of commissioning subcontract resource. • Coordination of SAP subcontract resource for the portfolio. • Supervision and support of subcontractors. • Construction of commissioning plans for projects. • Construction and management of QA and ITP for projects. • Review of completed project documentation. • As built drawing review and sign-off in relation to job scope. • Construction of O&M manuals in relation to job scope. • FAT test witnessing where required. • SAT test witnessing of key primary plant. • Development of company policy and best practices on wiring and electrical installation. • In emergency situations only, site commissioning works for Solar Farms grid connections up to 132kV, Battery Grid connection or combined sites, any other 11kV to 132kV grid connected projects, and any other private network projects from 11kV to 132kV. • Attendance of technical meetings to support the PM and delivery team. • Acting as a positive role model and influence to the wider team and Junior Engineers. • Providing cover for the Commissioning Manager where required. The Person: The ideal candidate will have proven Commissioning Engineer experience, together with Protection and Control Engineer experience. You will have EHV substation project delivery experience up to 132kv. UK NGET and DNO experience will also be required. You will have excellent knowledge of relevant BSEN, IEC, CIGRE, IEEE and ENA. The successful candidate will be highly organised, able to prioritise a busy workload and have an initiative-taking approach to tasks. You will be personable, professional and self-motivated with a team player attitude. Ideally, the role holder will be CEng/Ieng registered, or working towards this. A degree in Electrical and Electronics Engineering would also be beneficial. The Rewards: In return, we offer a competitive salary package of circa £60,000 to £65,000 per car allowance, annum plus company bonus scheme, Pension scheme, 25 days holiday (plus bank holidays) incremental with years of services, Employee Assistance Programme, Life Assurance, Optional Private Medical Insurance, Cycle Scheme, study support, and more, along with the opportunity to be part of a progressive and expanding business. If you feel you have the skills, knowledge, and experience, and want to be part of an ambitious and growing organisation, please apply today. Closing date for applications will be Monday 29th April 2024. TO APPLY PLEASE CLICK THE "APPLY NOW" BUTTON AND YOU WILL BE REDIRECTED TO BEGIN THE APPLICATION PROCES
Analogue IC Design Engineer Cambridge Up to 100K DOE Are you looking for a new opportunity within the Analogue IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in an IC Design Engineer with an Analogue bias to deliver industry leading IC Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Modelling and simulation of analogue designs for custom IC integration. Assessment and implementation of design improvements to optimise system performance. Building automated pre-silicon verification environment whilst supporting early development of embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in analogue custom IC design. Strong understanding of System on a Chip architecture and integration. Chip level architecture experience for mixed signal ASICs. Strong experience with modelling and verification for ASIC implementation. Experience in custom bench testing with System Verilog and Verilog-A. Knowledge of mixed signal circuitry: Analogue to Digital & Digital to analogue convertor design, Switching amplifiers & Oscillators. EDA tool experience for custom analogue IC development like Cadence, Mentor Graphics. IP Desing Specification & block level writing experience. Experience with Linux OS, revision control (Git) and scripting languages (Bash, Tcl, and Python). Some PCB Design experience. Some RTL coding experience with Verilog and System Verilog. Salary and Benefits: Up to 100K salary DOE. Travel opportunities. Private Health Insurance. Life insurance. 25 holidays plus public holidays (total of 33 days a year). Training by world leading experts. Cycle to work scheme.
Apr 25, 2024
Full time
Analogue IC Design Engineer Cambridge Up to 100K DOE Are you looking for a new opportunity within the Analogue IC Design space? Are you looking to offer your expertise to help scale a growing team? Are you looking to join a fast-growing company working on industry leading technologies in Smartphones, AR/VR & Wearables? Then this might just be the role for you. We are working with an industry leading electronics company that operate in the precision motion solutions space with their work being applied in the Smartphone, AR/VR and Wearables sectors. They are looking to bring in an IC Design Engineer with an Analogue bias to deliver industry leading IC Design and technical mentoring to a highly skilled, close-knit team. Key Responsibilities: Modelling and simulation of analogue designs for custom IC integration. Assessment and implementation of design improvements to optimise system performance. Building automated pre-silicon verification environment whilst supporting early development of embedded firmware throughout start of project. Integrate and partition in-house designs and IP from third parties and wrap with modelling logic to represent mixed signal design element. Asist with the validation of new silicon chips with a mix between CI/CD automation and manual tests through electrical test equipment. Qualifications and Experience: Strong experience in analogue custom IC design. Strong understanding of System on a Chip architecture and integration. Chip level architecture experience for mixed signal ASICs. Strong experience with modelling and verification for ASIC implementation. Experience in custom bench testing with System Verilog and Verilog-A. Knowledge of mixed signal circuitry: Analogue to Digital & Digital to analogue convertor design, Switching amplifiers & Oscillators. EDA tool experience for custom analogue IC development like Cadence, Mentor Graphics. IP Desing Specification & block level writing experience. Experience with Linux OS, revision control (Git) and scripting languages (Bash, Tcl, and Python). Some PCB Design experience. Some RTL coding experience with Verilog and System Verilog. Salary and Benefits: Up to 100K salary DOE. Travel opportunities. Private Health Insurance. Life insurance. 25 holidays plus public holidays (total of 33 days a year). Training by world leading experts. Cycle to work scheme.
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Apr 25, 2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Job Title: Electrical Technician/Fitter Job Location: Stoke on Trent, Staffordshire Shifts: Mornings and Afternoons rotating Pay: 28.05 Umbrella / 22 PAYE Hours per week: 37 Hours per week, anything over 37 hours is time and a half Shifts: Early shift (06:00 to 14:30) and a Late shift (14:00 to 22:30) Duration: Long-term contract with possibility of permanent work in the future Start Date: Immediate Client Summary: Our client is a leader in locomotive manufacturing in the UK they specialise in maintenance and modifications of these locomotives. With decades of experience, they deliver innovative solutions for transportation networks worldwide. Their commitment to excellence and sustainability ensures they remain a trusted partner in the rail industry's evolution. Position summary: The successful candidates will be involved in intricate electrical tasks primarily focused on locomotive systems. Roles can include: Routing cables through locomotive chassis and bodywork. Renewing wiring and looms. Executing crimping operations to a high standard. Maintaining a clean and organized work environment. Undertaking a rigorous conversion program with a strong emphasis on quality and excellence. Person Profile / Experience: Proven background in electrical wiring within sectors such as Aviation, Military, Automotive, or Plant Electrical/Electronics NVQ Level 3 or equivalent in Electrical/Electrical Installation Exceptional work ethic and reliability Commitment to maintaining high standards of work Contact information: Charlie Walker - Recruitment Consultant Email: (url removed)
Apr 25, 2024
Contractor
Job Title: Electrical Technician/Fitter Job Location: Stoke on Trent, Staffordshire Shifts: Mornings and Afternoons rotating Pay: 28.05 Umbrella / 22 PAYE Hours per week: 37 Hours per week, anything over 37 hours is time and a half Shifts: Early shift (06:00 to 14:30) and a Late shift (14:00 to 22:30) Duration: Long-term contract with possibility of permanent work in the future Start Date: Immediate Client Summary: Our client is a leader in locomotive manufacturing in the UK they specialise in maintenance and modifications of these locomotives. With decades of experience, they deliver innovative solutions for transportation networks worldwide. Their commitment to excellence and sustainability ensures they remain a trusted partner in the rail industry's evolution. Position summary: The successful candidates will be involved in intricate electrical tasks primarily focused on locomotive systems. Roles can include: Routing cables through locomotive chassis and bodywork. Renewing wiring and looms. Executing crimping operations to a high standard. Maintaining a clean and organized work environment. Undertaking a rigorous conversion program with a strong emphasis on quality and excellence. Person Profile / Experience: Proven background in electrical wiring within sectors such as Aviation, Military, Automotive, or Plant Electrical/Electronics NVQ Level 3 or equivalent in Electrical/Electrical Installation Exceptional work ethic and reliability Commitment to maintaining high standards of work Contact information: Charlie Walker - Recruitment Consultant Email: (url removed)
Overview Reporting to the Quality Manager, the Quality Engineer - Systems will be responsible for supporting the administration and co-ordination of all quality processes within the team in order to ensure compliance with the relevant standards. Responsibilities Plan and conduct internal audits in alignment with the appropriate standards, document findings and ensure improvement / corrective actions are implemented and effective. Support the Quality Manager with the administration of IR's, in addition to IR report generation and external auditors as required. Conduct supplier audits, document findings and ensure improvement / corrective actions are implemented and effective. Work with the Purchasing team and suppliers in order to support component issue resolution. Support with the administration and maintenance of the Quality Management System (QMS). Gather data and generate reports to support decision making within the team and wider business. Support the Quality Manager to ensure the ongoing compliance with the relevant quality, industry and regulatory standards. Identify the need for and support the implementation of continuous improvement initiatives across the business. Other duties as required. Essential Experience: Problem solving: Knowledge and experience of root cause analysis and corrective action, logical approach to resolution of issues. Data: Proven experience of collating, analysing, and presenting data. Engineering: Prior experience of working in a similar role within an engineering environment. Quality: Working in an ISO9001 or similar environment. IT Skills: Knowledge and experience of using Microsoft packages including Word, Excel, and Outlook. Desirable skills but not essential: Electronics Knowledge: Experience of working in a practical electronics environment. Auditing: Experience in conducting audits against ISO9001, processing audit documentation and improvement reports. Experience in administration and maintenance of the Quality Management System (QMS) Compliance: Acts with integrity and can work in accordance with regulation and compliance. Data Visualisation Software: Familiar with data visualisation software, such as Power BI or similar tools for date gathering and presentation. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job
Apr 25, 2024
Full time
Overview Reporting to the Quality Manager, the Quality Engineer - Systems will be responsible for supporting the administration and co-ordination of all quality processes within the team in order to ensure compliance with the relevant standards. Responsibilities Plan and conduct internal audits in alignment with the appropriate standards, document findings and ensure improvement / corrective actions are implemented and effective. Support the Quality Manager with the administration of IR's, in addition to IR report generation and external auditors as required. Conduct supplier audits, document findings and ensure improvement / corrective actions are implemented and effective. Work with the Purchasing team and suppliers in order to support component issue resolution. Support with the administration and maintenance of the Quality Management System (QMS). Gather data and generate reports to support decision making within the team and wider business. Support the Quality Manager to ensure the ongoing compliance with the relevant quality, industry and regulatory standards. Identify the need for and support the implementation of continuous improvement initiatives across the business. Other duties as required. Essential Experience: Problem solving: Knowledge and experience of root cause analysis and corrective action, logical approach to resolution of issues. Data: Proven experience of collating, analysing, and presenting data. Engineering: Prior experience of working in a similar role within an engineering environment. Quality: Working in an ISO9001 or similar environment. IT Skills: Knowledge and experience of using Microsoft packages including Word, Excel, and Outlook. Desirable skills but not essential: Electronics Knowledge: Experience of working in a practical electronics environment. Auditing: Experience in conducting audits against ISO9001, processing audit documentation and improvement reports. Experience in administration and maintenance of the Quality Management System (QMS) Compliance: Acts with integrity and can work in accordance with regulation and compliance. Data Visualisation Software: Familiar with data visualisation software, such as Power BI or similar tools for date gathering and presentation. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
Apr 25, 2024
Contractor
Software Engineer C++ Stevenage SC required before starting 12 Months could be extended Full Time Onsite PAY RATE - Up to £48.72 Per Hour PAYE Up To £65 Per Hour Pay To Umbrella Company INTERVIEW PROCESS 1 stage virtual interview CRITICAL ELEMENTS Strong knowledge of C and C++, Previous experience of developing Software in the area of test solutions, Good team working and communication skills The Opportunity Are you a forward thinking and talented software engineer who is passionate about creating high quality software and looking to take your career to the next level? This is a fantastic opportunity to be part of a team that is starting an exciting phase of transforming the way we develop and deliver software, putting our engineers at the heart of this transformation whilst developing software that facilitates testing across the whole of the companies UK product portfolio. We invite you to apply to join a team with a great balance of new ideas and in depth experience which promotes a highly dynamic working environment. The role will be for an initial 12 month period. In this role you will be: Designing and developing Test Equipment software to test world leading complex missile systems and sub-components; Working with a wide range of teams and stakeholders to deliver test software capability of products from early concept to production; Exploring and experimenting with new implementations and technologies to meet the ever challenging customer requirements Challenging and implementing real change when opportunities arise in the way the software is developed both within test software and the wider software community Embracing Agility and delivering value to the company giving you are real sense of achievement Working in a Software Engineering office/lab environment engaging with test equipment and electronic circuitry. What's in it for you? Chance to join a friendly, motivated team and play a part in its evolution. Working in a department supporting the whole product portfolio throughout the entire engineering life cycle will give you the platform to significantly increase your engineering skills and knowledge. To input and shape how Software is developed by introducing new development techniques and tools Working closely with our colleagues across the UK and in France and Italy, so there may be the opportunity to travel both within the UK and to our sites in France and Italy. Great personal development opportunities through various learning and development initiatives to keep you skills at the forefront of software engineering A supportive working environment enabling you to develop and grow your career in a company with expanding horizons. Working at the sharp end of product development and production, enabling the development and delivery of our world leading products to customers. What's great about the team The UK Test Software team is a multi-disciplined, dynamic, focused and agile team of about 50 engineers specialising in all aspects of Test Solution design, including hardware, software and Embedded Real Time systems. It is a great place to learn about the company's entire product range. What are we looking for We are keen to expand our team with the right people that complement and enrich our culture while empowering our exciting transformation initiative. We are keen to learn from new people and passionate about building high performing teams. We therefore invite self-motivated, passionate, adaptable and proficient software engineers to apply for this role. Previous software engineering experience in the development of test solutions Strong ability to write software in C/C++; experience with C# and Scripting languages would be an advantage to our future strategy. Proactive and able to take ownership of the software development. Great communication skills with a strong motivation for collaboration. Previous experience working in an agile development team. A strong understanding of what is required to create high quality software and the ability to support quality practices Knowledge and experience of NI Test Stand is desirable Knowledge of electronics measurement and debug techniques using equipment such as oscilloscopes and spectrum analysers Understanding of communications and serial interfaces such as RS422, RS485, Modbus, CAN and 1553 Can articulate the benefits of key software craftsmanship practices like unit testing and good design Someone who is comfortable with change and understands the importance of continuous improvement within a modern software development team. Experience of Test Driven Development within a software engineering context and comfortable with practices like pair programming and lightweight design modelling A good understanding of automation, continuous integration and DevOps principles and practices desirable.
Be one of the bold and engineer advanced networks with us! How You'll Help Us Connect The World: The Electronic Design Engineer will be a member of our RF Engineering team based out of our Scottish office in Fife. You will be responsible for the development of new designs and cost optimization of the existing products for local manufacture. Candidates must be able to provide real time solutions to design issues discovered in the manufacturing process and recommend/document the resolution. Also, must be knowledgeable in manufacturing processes and technologies to support factory and part evaluations. Responsible for the design, development, evaluation and analysis for an antenna control system. Performs component level design and initial testing. Develops and executes product procedures for production testing and supports integration plans for new or updated products. Test/evaluate competing products and technologies. Ability to Investigate and troubleshoot working prototypes/existing products. Stays current with embedded systems technology and research new technology developments. Documents procedures/processes related from initial designs through to final product manufacturing. Support Sales team and Product Line Management by assisting in the preparation of bids, proposals, and Request for Quote for current and potential customers. Under the leadership of more senior engineers, develop technical solutions/product designs to serve customer requirements. Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection. Work closely with our R&D centers in UK, India and China. Required Qualifications For Consideration: Minimum of 3 years of experience with embedded control systems, such as STM32, AVR, Arduino. Firmware design such as microcontroller programming (MATLAB, C, etc), motor motion control and data processing, experienced with programing software such as IAR Systems and Keil MDK-ARM. Electronic control system design experience utilizing sensors, actuators and microcontrollers. Experienced with electronics circuit design and PCB layout capture, experienced with PCB design software such as Mentor Designer, Altium Designer, etc. Familiar with communication protocol such as USB, Serial, Ethernet, etc. Able to design to obtain CE marking. Ability to set up and carry out tests on various electronics components using oscilloscope etc. and creation of test fixtures to support high volume production. Excellent problem solving and communication skills to sufficiently understand customer requirements and deliver results that meet customer requirements. Proficient in English- Good verbal, written and inter-personal communication skills. Self-motivated, creative and able to work independently. Familiar with working with NPI and operations to move product from development to volume. UK Drivers License would be beneficial. You Will Excite Us If You Have: Master degree in Electronics Engineering is preferred Holding patents would be good to have criteria Why Commscope? CommScope is pushing the boundaries of communications technology. For more than 40 years, we've been leaders in innovating 5G, private networks and Gigabit speeds everywhere - we're always anticipating what's next. Developments such as the Internet of Things, seamless connectivity, Cloud and 5G introduce new requirements and demand creative thinking. With our unmatched expertise in copper, fiber, and wireless infrastructure, our global clients rely on us to outperform today and be ready for the needs of tomorrow. CommScope is an Equal Opportunity Employer, including people with disabilities and veterans. To learn more visit
Apr 25, 2024
Full time
Be one of the bold and engineer advanced networks with us! How You'll Help Us Connect The World: The Electronic Design Engineer will be a member of our RF Engineering team based out of our Scottish office in Fife. You will be responsible for the development of new designs and cost optimization of the existing products for local manufacture. Candidates must be able to provide real time solutions to design issues discovered in the manufacturing process and recommend/document the resolution. Also, must be knowledgeable in manufacturing processes and technologies to support factory and part evaluations. Responsible for the design, development, evaluation and analysis for an antenna control system. Performs component level design and initial testing. Develops and executes product procedures for production testing and supports integration plans for new or updated products. Test/evaluate competing products and technologies. Ability to Investigate and troubleshoot working prototypes/existing products. Stays current with embedded systems technology and research new technology developments. Documents procedures/processes related from initial designs through to final product manufacturing. Support Sales team and Product Line Management by assisting in the preparation of bids, proposals, and Request for Quote for current and potential customers. Under the leadership of more senior engineers, develop technical solutions/product designs to serve customer requirements. Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection. Work closely with our R&D centers in UK, India and China. Required Qualifications For Consideration: Minimum of 3 years of experience with embedded control systems, such as STM32, AVR, Arduino. Firmware design such as microcontroller programming (MATLAB, C, etc), motor motion control and data processing, experienced with programing software such as IAR Systems and Keil MDK-ARM. Electronic control system design experience utilizing sensors, actuators and microcontrollers. Experienced with electronics circuit design and PCB layout capture, experienced with PCB design software such as Mentor Designer, Altium Designer, etc. Familiar with communication protocol such as USB, Serial, Ethernet, etc. Able to design to obtain CE marking. Ability to set up and carry out tests on various electronics components using oscilloscope etc. and creation of test fixtures to support high volume production. Excellent problem solving and communication skills to sufficiently understand customer requirements and deliver results that meet customer requirements. Proficient in English- Good verbal, written and inter-personal communication skills. Self-motivated, creative and able to work independently. Familiar with working with NPI and operations to move product from development to volume. UK Drivers License would be beneficial. You Will Excite Us If You Have: Master degree in Electronics Engineering is preferred Holding patents would be good to have criteria Why Commscope? CommScope is pushing the boundaries of communications technology. For more than 40 years, we've been leaders in innovating 5G, private networks and Gigabit speeds everywhere - we're always anticipating what's next. Developments such as the Internet of Things, seamless connectivity, Cloud and 5G introduce new requirements and demand creative thinking. With our unmatched expertise in copper, fiber, and wireless infrastructure, our global clients rely on us to outperform today and be ready for the needs of tomorrow. CommScope is an Equal Opportunity Employer, including people with disabilities and veterans. To learn more visit
Elevate your career as an Electronics R&D Technician with a dynamic Engineering business located in Woolpit. This role promises to be a stimulating challenge for a skilled individual eager to contribute to groundbreaking projects within a forward-thinking company.Embark on a journey where your expertise will be pivotal in the development of innovative electronic products. The company values the contribution of its staff and offers a supportive environment where creativity and technical prowess are nurtured. Enjoy a competitive salary, comprehensive benefits package, and the chance to work with cutting-edge technology in a state-of-the-art facility.The ideal candidate will possess a robust foundation in electronics, with a proven track record of success in research and development environments. A keen eye for detail and a passion for problem-solving are essential, as the role involves designing, prototyping, and testing new electronic components and systems.Key Responsibilities:- Collaborate with engineers to design and develop electronic circuits and systems.- Construct and evaluate prototypes, providing insightful feedback to enhance performance.- Conduct experiments and analyse data to support the progression of R&D projects.- Troubleshoot and resolve complex technical issues, ensuring reliability and efficiency.- Maintain accurate records of design iterations, test results, and project progress.Essential Skills & Experience:- A degree in Electronics or a related field, or equivalent practical experience.- Proficiency in the use of electronic test equipment and tools.- Strong analytical skills with a methodical approach to problem-solving.- Experience with CAD software for electronic circuit design.- Excellent communication and teamwork abilities, with a flair for innovation.This role is not just another job; it is a chance to make a significant impact in a company that is shaping the future of technology. If you have the skills and the drive to excel in this role, submit your application and join a team where your contributions will be celebrated and your professional growth guaranteed.
Apr 25, 2024
Full time
Elevate your career as an Electronics R&D Technician with a dynamic Engineering business located in Woolpit. This role promises to be a stimulating challenge for a skilled individual eager to contribute to groundbreaking projects within a forward-thinking company.Embark on a journey where your expertise will be pivotal in the development of innovative electronic products. The company values the contribution of its staff and offers a supportive environment where creativity and technical prowess are nurtured. Enjoy a competitive salary, comprehensive benefits package, and the chance to work with cutting-edge technology in a state-of-the-art facility.The ideal candidate will possess a robust foundation in electronics, with a proven track record of success in research and development environments. A keen eye for detail and a passion for problem-solving are essential, as the role involves designing, prototyping, and testing new electronic components and systems.Key Responsibilities:- Collaborate with engineers to design and develop electronic circuits and systems.- Construct and evaluate prototypes, providing insightful feedback to enhance performance.- Conduct experiments and analyse data to support the progression of R&D projects.- Troubleshoot and resolve complex technical issues, ensuring reliability and efficiency.- Maintain accurate records of design iterations, test results, and project progress.Essential Skills & Experience:- A degree in Electronics or a related field, or equivalent practical experience.- Proficiency in the use of electronic test equipment and tools.- Strong analytical skills with a methodical approach to problem-solving.- Experience with CAD software for electronic circuit design.- Excellent communication and teamwork abilities, with a flair for innovation.This role is not just another job; it is a chance to make a significant impact in a company that is shaping the future of technology. If you have the skills and the drive to excel in this role, submit your application and join a team where your contributions will be celebrated and your professional growth guaranteed.
Our client is one of the world's leading manufacturers of sophisticated software-controlled car park management systems. They have a global presence and their innovative systems provide their customers with a competitive advantage. They now have an opportunity for a Field Service Engineer, to work at customer sites throughout the primarily in West Yorkshire, North Yorkshire , East Riding of Yorkshire and the surrounding counties. Ideally applicants living in or close to West Yorkshire & North Yorkshire such as Huddersfield, Bradford, Wakefield, Leeds, Halifax, Huddersfield, Castleford, Harrogate, York, Pontefract & Goole are invited to apply. THE ROLE Install, commission, service, repair and provide PPM on a range of parking solution technology - cloud / networked electro-mechanical systems. Installation and commissioning of additional equipment such as parking signs and lights, intercom and network equipment including CAT5/6 cabling and testing. Working to response / fix times and dealing with timesheets, service reports, installation reports and control stock levels. Carry out technical upgrades and site surveys and provide telephone technical support for customers. Contribute to a service minded and client oriented approach focused upon the end-user's satisfaction. THE INDIVIDUAL You could perhaps come from the Security Systems - CCTV, Access Control, Alarm or Transportation / Mass Transit - Revenue Collection / Ticketing or ATM, Biometrics or Gaming / Leisure sectors. The ANPR (Automatic Number Plate Recognition) sector, Car Parking / On-Street / Off Street / Pay-on-Foot / Traffic sector, or perhaps a systems integration organisation or capital equipment manufacturer or a technical company who deliver project solutions to the public sector for e.g. NHS, Police, Local Authorities or Retail sectors. To apply you should have experience in a service or field service or site / technical support role, working on electronics, electro-mechanical or PC-controlled capital equipment. Ideally, but not essentially, you will have a technical qualification, such as City & Guilds 224, 236, NVQ / ONC / OND / HNC or HND or Degree in Electronic / Electrical / Mechanical / Systems Engineering or equivalent. You should have strong board level electronics fault finding and service skills. Experience of repairing and installing networked car parking systems / solutions / off street / pay on foot equipment, barriers, gates / gating, ANPR, automatic doors, access control or ticketing / payment machines, note validators, coin mechanisms or fare automation systems is advantageous, but not necessary. You may have worked in the Security Systems - CCTV, Access Control, Alarm or Transportation / Mass Transit - Revenue Collection / Ticketing or ATM, Biometrics, Vending or Leisure / Gaming sectors. The ANPR (Automatic Number Plate Recognition) sector / Traffic sector, or perhaps a Systems Integrator or capital equipment manufacturer or a technical company who deliver project solutions to the public sector for e.g., NHS, Police, Local Authorities or Retail sectors. Full product training will be offered. WHY APPLY? This is an excellent opportunity to join an established, growing company in a stable market sector with customer focus, quality and a workforce excellence, that values its employees and has good team spirit. You will be provided with full product training and support. This is an ideal opportunity to further develop your engineering career with an expanding global organisation with flat hierarchies. A starting salary of £28,000 p.a.- £30,000 p.a. is accompanied by a package that includes paid travelling time, unmarked company vehicle + pension - company pays 5% after probation period+ paid stand-by/call-out & overtime OTE c. £33,000 p.a. + phone + 25 days holidays + PPE.
Apr 25, 2024
Full time
Our client is one of the world's leading manufacturers of sophisticated software-controlled car park management systems. They have a global presence and their innovative systems provide their customers with a competitive advantage. They now have an opportunity for a Field Service Engineer, to work at customer sites throughout the primarily in West Yorkshire, North Yorkshire , East Riding of Yorkshire and the surrounding counties. Ideally applicants living in or close to West Yorkshire & North Yorkshire such as Huddersfield, Bradford, Wakefield, Leeds, Halifax, Huddersfield, Castleford, Harrogate, York, Pontefract & Goole are invited to apply. THE ROLE Install, commission, service, repair and provide PPM on a range of parking solution technology - cloud / networked electro-mechanical systems. Installation and commissioning of additional equipment such as parking signs and lights, intercom and network equipment including CAT5/6 cabling and testing. Working to response / fix times and dealing with timesheets, service reports, installation reports and control stock levels. Carry out technical upgrades and site surveys and provide telephone technical support for customers. Contribute to a service minded and client oriented approach focused upon the end-user's satisfaction. THE INDIVIDUAL You could perhaps come from the Security Systems - CCTV, Access Control, Alarm or Transportation / Mass Transit - Revenue Collection / Ticketing or ATM, Biometrics or Gaming / Leisure sectors. The ANPR (Automatic Number Plate Recognition) sector, Car Parking / On-Street / Off Street / Pay-on-Foot / Traffic sector, or perhaps a systems integration organisation or capital equipment manufacturer or a technical company who deliver project solutions to the public sector for e.g. NHS, Police, Local Authorities or Retail sectors. To apply you should have experience in a service or field service or site / technical support role, working on electronics, electro-mechanical or PC-controlled capital equipment. Ideally, but not essentially, you will have a technical qualification, such as City & Guilds 224, 236, NVQ / ONC / OND / HNC or HND or Degree in Electronic / Electrical / Mechanical / Systems Engineering or equivalent. You should have strong board level electronics fault finding and service skills. Experience of repairing and installing networked car parking systems / solutions / off street / pay on foot equipment, barriers, gates / gating, ANPR, automatic doors, access control or ticketing / payment machines, note validators, coin mechanisms or fare automation systems is advantageous, but not necessary. You may have worked in the Security Systems - CCTV, Access Control, Alarm or Transportation / Mass Transit - Revenue Collection / Ticketing or ATM, Biometrics, Vending or Leisure / Gaming sectors. The ANPR (Automatic Number Plate Recognition) sector / Traffic sector, or perhaps a Systems Integrator or capital equipment manufacturer or a technical company who deliver project solutions to the public sector for e.g., NHS, Police, Local Authorities or Retail sectors. Full product training will be offered. WHY APPLY? This is an excellent opportunity to join an established, growing company in a stable market sector with customer focus, quality and a workforce excellence, that values its employees and has good team spirit. You will be provided with full product training and support. This is an ideal opportunity to further develop your engineering career with an expanding global organisation with flat hierarchies. A starting salary of £28,000 p.a.- £30,000 p.a. is accompanied by a package that includes paid travelling time, unmarked company vehicle + pension - company pays 5% after probation period+ paid stand-by/call-out & overtime OTE c. £33,000 p.a. + phone + 25 days holidays + PPE.
IMMEDIATE START FOR ASSEMBLY AND MACHINE OPERATIVES AVAILABLE Are you a fan of electronics / engineering / manufacturing - are you keen to secure a job within theelectronics industry? Then this may be the perfect opportunity for you to joinan established electronics company based in Dartford. My client is currently looking for a trainee PCB tester, assembly machine operative to join their team, in their busy manufacturing and production area and will be based in their Dartford factory. The Assembly & Machine Operative role will involve: Testing printed circuit boards / metal fabrication of panel boards / handling metal materials Checking and testing manufactured products Fault finding Setting machinery and assembly You will be required to: Meetspecific departmental and company targets Follow systems / procedures within the department, following all health and safety regulations, housekeeping, work instructions and quality checking. Assembly work and machine operating roles and PCB tester Skills & Experience required: Computer literate with basic mathematics Ability to work as part of a team Working to tight deadlines with a high level of accuracy and previous experience of working in a manufacturing environment is desirable. Experience using similar machinery - preferred but not essential as full training provided Able to understand mechanical drawings / artwork - preferred not essential Hours of Work Mon - Friday 2- 10pm (training will be provided on day shift 8-4:30pm first 2 weeks) Paying a competitive hourly rate of £11.89per hour To apply for this position, please send an up-to-date CV to Alice Tanner. Please note that due to the high level of applicants we are not able to respond to unsuccessful candidates, and if you have not been contacted within seven days assume you have not been selected on this occasion. Zoom Recruitment Services Ltd is a specialist agency supplying permanent, temporary and contractual staff within Commercial, Logistical, Industrial and Technical sectors. We are also accredited members of the Recruitment and Employment Confederation (REC) and follow professional and ethical working procedures JBRP1_UKTJ
Apr 25, 2024
Full time
IMMEDIATE START FOR ASSEMBLY AND MACHINE OPERATIVES AVAILABLE Are you a fan of electronics / engineering / manufacturing - are you keen to secure a job within theelectronics industry? Then this may be the perfect opportunity for you to joinan established electronics company based in Dartford. My client is currently looking for a trainee PCB tester, assembly machine operative to join their team, in their busy manufacturing and production area and will be based in their Dartford factory. The Assembly & Machine Operative role will involve: Testing printed circuit boards / metal fabrication of panel boards / handling metal materials Checking and testing manufactured products Fault finding Setting machinery and assembly You will be required to: Meetspecific departmental and company targets Follow systems / procedures within the department, following all health and safety regulations, housekeeping, work instructions and quality checking. Assembly work and machine operating roles and PCB tester Skills & Experience required: Computer literate with basic mathematics Ability to work as part of a team Working to tight deadlines with a high level of accuracy and previous experience of working in a manufacturing environment is desirable. Experience using similar machinery - preferred but not essential as full training provided Able to understand mechanical drawings / artwork - preferred not essential Hours of Work Mon - Friday 2- 10pm (training will be provided on day shift 8-4:30pm first 2 weeks) Paying a competitive hourly rate of £11.89per hour To apply for this position, please send an up-to-date CV to Alice Tanner. Please note that due to the high level of applicants we are not able to respond to unsuccessful candidates, and if you have not been contacted within seven days assume you have not been selected on this occasion. Zoom Recruitment Services Ltd is a specialist agency supplying permanent, temporary and contractual staff within Commercial, Logistical, Industrial and Technical sectors. We are also accredited members of the Recruitment and Employment Confederation (REC) and follow professional and ethical working procedures JBRP1_UKTJ
Senior Electronics Engineer Production (AC/DC) Norfolk Permanent £competitive salaries Our research and development client specialises in electric motors, controllers, and inverters for vehicles and equipment. They are looking to recruit a Senior Electronics Engineer Production (AC/DC) to join their Electronics Engineering team. JOB DESCRIPTION Purpose The Senior Electronic Engineer is an integral member of the project team responsible for delivering development projects of varying size and complexity. The Senior Electronics Engineer is responsible for the power electronics hardware design on multiple projects and will be responsible for the control, sensing, communications, and thermal requirements of the design under the direction of the Lead electronics engineer taking designs into production. The role reports to the Lead Electronics Engineer. Duties Working closely with the Engineering team to ensure projects are worked to time and within budget. Assisting the lead electronics engineer with project timelines, budgets, and resource requirements. Liaising with firmware team to ensure that company coding standards are adhered to and that resources are aligned to deliver project functional requirements Designing AC/DC converters, with the application of low voltage battery charging to a written specification. Taking design from concept schematic through to release for manufacture/certification using the company processes Lead all manufacturing requirements and processes required for AC/DC designs, including such processes as FMEA, DFM/DFA and Verification and Validation plans/reports Carrying out feasibility studies for new technical innovations. Supporting test engineers to carry out testing where required. Test, Develop and verify design against specification in accordance with companies values, policies & process. Writing test plans to a high standard and in place before any testing conducted with reports completed aligned with the verification and validation process. Contributing to the ongoing improvement of the standard design process. Accountabilities Ensure company standards are met for hardware designs, both regulatory & practice, both in designs and design methodology Power electronics development aspects of AC/DC converters and their application to battery charging and integration into motor controllers. Ensure deliverables are met in accordance with the project plans, assessing resources required to complete work packages, communicating any problems / updates to leadership team Maintain a safe, clean, and orderly environment reflective of HSE principles Person Specification Process driven with the ability to enhance, improve and develop processes as the business grows and looks to continuously improve Exceptional attention to detail and capable of maintaining high standards even under pressure, produces accurate results Passionate and driven to deliver value to the business Technically strong with a commercial mindset Problem solving and resourceful focuses on cause, not symptom, proactive approach and can identify best use of resources to deliver value Accountable takes responsibility for outputs and actions Constructively challenge able to positively challenge the status quo to realise benefit Support QA and continuous improvement Can do, Will do approach. Will walk the extra mile as required. Qualifications Degree in an engineering related discipline or relevant experience/qualification Ideally working to or achieved a chartered status or equivalent as part of personal development plan. Experience Essential Experience of working within an engineering or manufacturing based organisation. Working experience with full-bridge, push-pull and forward isolated converters for inverter and battery charging systems, 2-5kW+ single phase, good experience of LLC converters, PFC and input filtering Experience of various battery chemistries (Li-ion, Lifepo4, Lead Acid) Simulation experience of complex circuitry using such programs such as Simulink, Matlab, Simetrix or LTSpice Experience using Electronics CAD Software (Preferred Altium) Understanding of thermal management requirements for electronics and working in a multi-disciplinary team to find solutions for thermal design considerations Experience in a product development environment, familiar with New Product Introduction (NPI) Primary Design Review (PDR), Critical Design Review (CDR), First Article Inspection (FAI) Verification and Validation (V&V) In depth knowledge of both theoretical and practical aspects of electronic engineering Understanding of firmware design & control considerations needed when developing hardware which must interface with a programmable block. Analogue design of current and voltage sensing systems and general signal conditioning. Experience in EMC compliance & design considerations Preferred Experience Working experience with additional AC/DC Topologies, i.e. flyback Experience with 3-phase AC to DC systems Experience with bidirectional AC/DC Systems Hands on experience with designing own magnetics. Fundamental understating of proximity losses, skin effect losses, core losses. Deep understanding of material properties in ferromagnetic materials Experience with control loop theory and ability to evaluate system requirements, simulate and work to produce control algorithms Skills/Abilities/Knowledge/Qualities Empathy with the mission, vision, values and ethos of the company Ability to work overseas as required Resilience; ability to cope under pressure Positive about change and continuous improvement Engaging, personable and approachable. Seen to be demonstrably and consistently supportive in working with all staff Process driven; results orientated Can work at pace, with fast changing priorities; shows agility and adaptability Delegation skills Works with a growth mindset Good degree of self- awareness Works in alignment to others, as a default position Planning, organisational and time management skills Team worker with ability to use own initiative IT skills including email, Word, Excel, PowerPoint and MRP software Full driving licence and own vehicle insured for business use To apply please send an MS Word formatted version of your CV for our review and conside JBRP1_UKTJ
Apr 24, 2024
Full time
Senior Electronics Engineer Production (AC/DC) Norfolk Permanent £competitive salaries Our research and development client specialises in electric motors, controllers, and inverters for vehicles and equipment. They are looking to recruit a Senior Electronics Engineer Production (AC/DC) to join their Electronics Engineering team. JOB DESCRIPTION Purpose The Senior Electronic Engineer is an integral member of the project team responsible for delivering development projects of varying size and complexity. The Senior Electronics Engineer is responsible for the power electronics hardware design on multiple projects and will be responsible for the control, sensing, communications, and thermal requirements of the design under the direction of the Lead electronics engineer taking designs into production. The role reports to the Lead Electronics Engineer. Duties Working closely with the Engineering team to ensure projects are worked to time and within budget. Assisting the lead electronics engineer with project timelines, budgets, and resource requirements. Liaising with firmware team to ensure that company coding standards are adhered to and that resources are aligned to deliver project functional requirements Designing AC/DC converters, with the application of low voltage battery charging to a written specification. Taking design from concept schematic through to release for manufacture/certification using the company processes Lead all manufacturing requirements and processes required for AC/DC designs, including such processes as FMEA, DFM/DFA and Verification and Validation plans/reports Carrying out feasibility studies for new technical innovations. Supporting test engineers to carry out testing where required. Test, Develop and verify design against specification in accordance with companies values, policies & process. Writing test plans to a high standard and in place before any testing conducted with reports completed aligned with the verification and validation process. Contributing to the ongoing improvement of the standard design process. Accountabilities Ensure company standards are met for hardware designs, both regulatory & practice, both in designs and design methodology Power electronics development aspects of AC/DC converters and their application to battery charging and integration into motor controllers. Ensure deliverables are met in accordance with the project plans, assessing resources required to complete work packages, communicating any problems / updates to leadership team Maintain a safe, clean, and orderly environment reflective of HSE principles Person Specification Process driven with the ability to enhance, improve and develop processes as the business grows and looks to continuously improve Exceptional attention to detail and capable of maintaining high standards even under pressure, produces accurate results Passionate and driven to deliver value to the business Technically strong with a commercial mindset Problem solving and resourceful focuses on cause, not symptom, proactive approach and can identify best use of resources to deliver value Accountable takes responsibility for outputs and actions Constructively challenge able to positively challenge the status quo to realise benefit Support QA and continuous improvement Can do, Will do approach. Will walk the extra mile as required. Qualifications Degree in an engineering related discipline or relevant experience/qualification Ideally working to or achieved a chartered status or equivalent as part of personal development plan. Experience Essential Experience of working within an engineering or manufacturing based organisation. Working experience with full-bridge, push-pull and forward isolated converters for inverter and battery charging systems, 2-5kW+ single phase, good experience of LLC converters, PFC and input filtering Experience of various battery chemistries (Li-ion, Lifepo4, Lead Acid) Simulation experience of complex circuitry using such programs such as Simulink, Matlab, Simetrix or LTSpice Experience using Electronics CAD Software (Preferred Altium) Understanding of thermal management requirements for electronics and working in a multi-disciplinary team to find solutions for thermal design considerations Experience in a product development environment, familiar with New Product Introduction (NPI) Primary Design Review (PDR), Critical Design Review (CDR), First Article Inspection (FAI) Verification and Validation (V&V) In depth knowledge of both theoretical and practical aspects of electronic engineering Understanding of firmware design & control considerations needed when developing hardware which must interface with a programmable block. Analogue design of current and voltage sensing systems and general signal conditioning. Experience in EMC compliance & design considerations Preferred Experience Working experience with additional AC/DC Topologies, i.e. flyback Experience with 3-phase AC to DC systems Experience with bidirectional AC/DC Systems Hands on experience with designing own magnetics. Fundamental understating of proximity losses, skin effect losses, core losses. Deep understanding of material properties in ferromagnetic materials Experience with control loop theory and ability to evaluate system requirements, simulate and work to produce control algorithms Skills/Abilities/Knowledge/Qualities Empathy with the mission, vision, values and ethos of the company Ability to work overseas as required Resilience; ability to cope under pressure Positive about change and continuous improvement Engaging, personable and approachable. Seen to be demonstrably and consistently supportive in working with all staff Process driven; results orientated Can work at pace, with fast changing priorities; shows agility and adaptability Delegation skills Works with a growth mindset Good degree of self- awareness Works in alignment to others, as a default position Planning, organisational and time management skills Team worker with ability to use own initiative IT skills including email, Word, Excel, PowerPoint and MRP software Full driving licence and own vehicle insured for business use To apply please send an MS Word formatted version of your CV for our review and conside JBRP1_UKTJ
ELECTRONICS TEST EQUIPMENT MANAGER - INSIDE IR35 - VIA UMBRELLA - 65 PER HOUR - SC (BUT CAN START ON BPSS) - STEVENAGE - 6 MONTHS - SINGLE STAGE INTERVIEW PROCESS Yolk Recruitment are recruiting for an Electronics Test Equipment Manager to work an initial 6 month deal working from Stevenage. Responsibilities: As the appointed Test Equipment Project Manager, you will play a crucial role in defining and executing the project test equipment strategy. Your responsibilities include: Developing the project test equipment strategy, including a commonality approach, TE quantities, and use cases. Defining TE Technical Requirements, soliciting input from stakeholders, and managing conflicting requirements. Proposing and recommending test trade-offs to the Chief Design Engineer (coverage vs cost, etc.). Overseeing the TE Statement of Work. Managing TE Design trades. Acting as the sole point of contact between the project and the internal TE design team, tracking and reporting progress and issues. Ensuring the delivery of TE to time, cost, and quality. Managing TE integration with facilities, obsolescence, upgrade strategy, and continuous improvement. Skillset/Experience Required: The successful candidate will ideally: Be educated to degree level with substantial experience in test, electrical, or electronic engineering. Have experience in at least one of the following: Digital electronics and microprocessor systems, Analogue electronics, Electronics testing, Test equipment design. Have a good understanding of requirements capture, project management, and planning. Other Attributes: The ideal candidate will possess: The ability to influence stakeholders across the company. Determination and a desire to succeed. Strong interpersonal and well-developed communication skills (written & verbal). Willingness to travel when required.
Apr 24, 2024
Contractor
ELECTRONICS TEST EQUIPMENT MANAGER - INSIDE IR35 - VIA UMBRELLA - 65 PER HOUR - SC (BUT CAN START ON BPSS) - STEVENAGE - 6 MONTHS - SINGLE STAGE INTERVIEW PROCESS Yolk Recruitment are recruiting for an Electronics Test Equipment Manager to work an initial 6 month deal working from Stevenage. Responsibilities: As the appointed Test Equipment Project Manager, you will play a crucial role in defining and executing the project test equipment strategy. Your responsibilities include: Developing the project test equipment strategy, including a commonality approach, TE quantities, and use cases. Defining TE Technical Requirements, soliciting input from stakeholders, and managing conflicting requirements. Proposing and recommending test trade-offs to the Chief Design Engineer (coverage vs cost, etc.). Overseeing the TE Statement of Work. Managing TE Design trades. Acting as the sole point of contact between the project and the internal TE design team, tracking and reporting progress and issues. Ensuring the delivery of TE to time, cost, and quality. Managing TE integration with facilities, obsolescence, upgrade strategy, and continuous improvement. Skillset/Experience Required: The successful candidate will ideally: Be educated to degree level with substantial experience in test, electrical, or electronic engineering. Have experience in at least one of the following: Digital electronics and microprocessor systems, Analogue electronics, Electronics testing, Test equipment design. Have a good understanding of requirements capture, project management, and planning. Other Attributes: The ideal candidate will possess: The ability to influence stakeholders across the company. Determination and a desire to succeed. Strong interpersonal and well-developed communication skills (written & verbal). Willingness to travel when required.
Location: Stevenage (site based) Duration: 6 month contract Rate: 21ph UMB to 36ph UMB DOE (Inside IR35) Role: Our client, a well known defence company, is looking for a Product Assurance Engineer to join their team on a contract basis. This role supports within their Electronics team, who work with key stakeholders across the business, preventing/minimising product non-conformance, supporting smooth Equipment delivery, assuring reliable products and increasing Customer satisfaction. Responsibilities: Review, contribute and maintain Equipment Quality planning documentation. Ensure compliance to Electronic Engineering BMS procedures is maintained. Ensure Product Life Cycle reviews are planned, carried out and actions managed appropriately. Manage Product Non-Conformance. Facilitate implementation of Non-conformance process. Support design and manufacturing defect investigations. Provide Non-Conformance data analysis and summary reports into Major Equipment and senior management reviews. Proactively identify, communicate and mitigate Quality risks and issues for in house equipment's with the aim of reducing risk and increasing customer satisfaction. Participate in engineering process improvement and facilitate local flash audits providing compliance and process improvement ideas. Perform Hardware Acceptance activities ensuring products conform to customer expected requirements. Skillset/experience required: Ideally minimum HNC/HND in Engineering or Quality Assurance Experienced quality professionals, preferably within Electronic Engineering with a proven track record in Product Assurance. Practitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.) Good knowledge of the product lifecycle - specifically in development Strong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness and ability to use own initiative to deliver improvements Apply today via the link provided!
Apr 24, 2024
Contractor
Location: Stevenage (site based) Duration: 6 month contract Rate: 21ph UMB to 36ph UMB DOE (Inside IR35) Role: Our client, a well known defence company, is looking for a Product Assurance Engineer to join their team on a contract basis. This role supports within their Electronics team, who work with key stakeholders across the business, preventing/minimising product non-conformance, supporting smooth Equipment delivery, assuring reliable products and increasing Customer satisfaction. Responsibilities: Review, contribute and maintain Equipment Quality planning documentation. Ensure compliance to Electronic Engineering BMS procedures is maintained. Ensure Product Life Cycle reviews are planned, carried out and actions managed appropriately. Manage Product Non-Conformance. Facilitate implementation of Non-conformance process. Support design and manufacturing defect investigations. Provide Non-Conformance data analysis and summary reports into Major Equipment and senior management reviews. Proactively identify, communicate and mitigate Quality risks and issues for in house equipment's with the aim of reducing risk and increasing customer satisfaction. Participate in engineering process improvement and facilitate local flash audits providing compliance and process improvement ideas. Perform Hardware Acceptance activities ensuring products conform to customer expected requirements. Skillset/experience required: Ideally minimum HNC/HND in Engineering or Quality Assurance Experienced quality professionals, preferably within Electronic Engineering with a proven track record in Product Assurance. Practitioner of current QA problem solving and improvement methods (8D, RCA, DMAIC, etc.) Good knowledge of the product lifecycle - specifically in development Strong analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools Continuous improvement awareness and ability to use own initiative to deliver improvements Apply today via the link provided!
Overview Important: Due to the level of security clearance required, all applicants must be eligible to obtain UKEYES ONLY clearance, and therefore be a Sole UK National. Working: This role is full time office based with possible flexible working hours. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Onsite Caf , Free parking, Table Tennis and more! Full range of company benefits, flexible working, training, development and clear career progression! The Principal / Lead Systems Engineer with be working within the Project/Systems Engineering function which provides expertise to all projects through the bid and full development lifecycle. Main responsibilities: Represents the Systems discipline for the totality of the Systems assigned work packages and tasking to deliver obligations and commitments on time and budget. Support the Engineering Project Lead (EPL) in delivering the engineering obligations of a project, to the agreed plans, budget and schedule. Accepts and delivers delegates EPL responsibilities applicable to the Systems assigned work packages. Is responsible for all aspects of the development of technical solutions to large and complex engineering problems, following Systems Engineering processes, to ensure customer requirements are satisfied. Develop Systems Engineering artefacts, as required, across the product development lifecycle, to result in a positive project outcome. Provide technical direction and exert technical influence across numerous project work packages, or projects, such that the optimal approach, architecture, design, and implementation are selected. Work closely with the system, hardware, firmware and software architects to ensure consistency, design for modularity and re-use, and technical excellence. Plan, co-ordinate and present at internal and external design reviews, to senior management and customers, to ensure a successful event. Lead, manages and reports on defined aspects of the project to achieve optimal balance between requirements, schedule and cost. Manage customers and external suppliers to ensure compliance with agreed processes and achievement of project objectives. Work closely with other discipline lead/s, project management and engineering project leads to create bids and proposals, leading to contract awards Estimate time and effort required for systems activities and deliver to these time and effort estimates to ensure cost and schedule adherence. Reviews and signs off significant technical documents. Explain technically complex concepts clearly to less technical/involved parties. Manage security of information as defined in the Security manual to ensure compliance with Government regulations. Become recognised as the company expert, in a specific subject matter. Accepts Line Management duties, proactively leading and coaching reports, aid the creation of development plans and manages their execution, whilst measuring and supporting continuous improvement in others. As required supports recruitment, early careers development and STEM engagement. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience and a full understanding of Systems Engineering, the V-Model and associated processes/lifecycle. Significant experience of developing high quality requirements and establishing a fully compliant systems design. Technical and Line management experience of a team of systems engineers Experience in writing high quality technical documentation and the formal technical review of such material. Substantial knowledge of System Engineering practices, methodologies, processes, techniques and technology trends. Experience of DOORS, UML, SEBoK, Enterprise Architect and SysML. Experience of hands-on development of either hardware, software or firmware development, particularly in an embedded environment. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. INCOSE recognition ASEP or CSEP Experience working as a technical Subject Matter Expert (SME) and developing new areas of expertise as and when required.
Apr 24, 2024
Full time
Overview Important: Due to the level of security clearance required, all applicants must be eligible to obtain UKEYES ONLY clearance, and therefore be a Sole UK National. Working: This role is full time office based with possible flexible working hours. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Onsite Caf , Free parking, Table Tennis and more! Full range of company benefits, flexible working, training, development and clear career progression! The Principal / Lead Systems Engineer with be working within the Project/Systems Engineering function which provides expertise to all projects through the bid and full development lifecycle. Main responsibilities: Represents the Systems discipline for the totality of the Systems assigned work packages and tasking to deliver obligations and commitments on time and budget. Support the Engineering Project Lead (EPL) in delivering the engineering obligations of a project, to the agreed plans, budget and schedule. Accepts and delivers delegates EPL responsibilities applicable to the Systems assigned work packages. Is responsible for all aspects of the development of technical solutions to large and complex engineering problems, following Systems Engineering processes, to ensure customer requirements are satisfied. Develop Systems Engineering artefacts, as required, across the product development lifecycle, to result in a positive project outcome. Provide technical direction and exert technical influence across numerous project work packages, or projects, such that the optimal approach, architecture, design, and implementation are selected. Work closely with the system, hardware, firmware and software architects to ensure consistency, design for modularity and re-use, and technical excellence. Plan, co-ordinate and present at internal and external design reviews, to senior management and customers, to ensure a successful event. Lead, manages and reports on defined aspects of the project to achieve optimal balance between requirements, schedule and cost. Manage customers and external suppliers to ensure compliance with agreed processes and achievement of project objectives. Work closely with other discipline lead/s, project management and engineering project leads to create bids and proposals, leading to contract awards Estimate time and effort required for systems activities and deliver to these time and effort estimates to ensure cost and schedule adherence. Reviews and signs off significant technical documents. Explain technically complex concepts clearly to less technical/involved parties. Manage security of information as defined in the Security manual to ensure compliance with Government regulations. Become recognised as the company expert, in a specific subject matter. Accepts Line Management duties, proactively leading and coaching reports, aid the creation of development plans and manages their execution, whilst measuring and supporting continuous improvement in others. As required supports recruitment, early careers development and STEM engagement. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience and a full understanding of Systems Engineering, the V-Model and associated processes/lifecycle. Significant experience of developing high quality requirements and establishing a fully compliant systems design. Technical and Line management experience of a team of systems engineers Experience in writing high quality technical documentation and the formal technical review of such material. Substantial knowledge of System Engineering practices, methodologies, processes, techniques and technology trends. Experience of DOORS, UML, SEBoK, Enterprise Architect and SysML. Experience of hands-on development of either hardware, software or firmware development, particularly in an embedded environment. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. INCOSE recognition ASEP or CSEP Experience working as a technical Subject Matter Expert (SME) and developing new areas of expertise as and when required.
Want to join a trusted and reputable company with a broad portfolio of capabilities across the Maritime domain? Overview Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK for 5 years. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! The Health & Safety function is responsible for maintaining and continually improving the Safety Management System and for ensuring that all statutory and legislative requirements are met. The function supports the business in the identification and delivery of all H&S training for employees and managers and manages the internal audit programme. An individual at this grade leads large teams to input into the plans of the function. Will be responsible for implementing policy and ensuring delivery within area of responsibility, linking with other parts of the function or business. Key Responsibilities: Health, Safety, Environment and Energy Oversight of the implementation/operation of the Health and Safety, Environmental and Energy Management Systems Coaching and influencing site leadership and teams to achieve SBU certification aspirations (e.g., ISO 14001, 45001 and 50001) Ensure an HSE programme is in place in to implement EHS + E management systems to include risk assessments, safety tours, hazard identification, accident/near miss/incident investigation/reporting, internal/external auditing, waste stream and emissions management, Energy Profile management, regulatory compliance management Agreeing meaningful and stretching HSE objectives and targets and challenging progress of associated programme plans, aligned to Energy's strategy. Preparation/analysis of monthly HSE management reports (including KPI data) Engage and motivate site leadership and teams through HSE events, communications, and safety walls. Professional oversight of HSE statutory and legislative requirements and liaising with relevant authorities Management of HSE training coverage and completion. Site level implementation of an SBU internal governance and management assurance programmes Facilities Management Management of the facilities services provision at the three sites. Oversight of planned preventative maintenance schedules covering all statutory and non-statutory tasks at 3 Location across the UK. Appointment and management of key service providers for FM activities and monitoring performance against SLA's/KPI's Liaise and negotiate with landlords, agents, local authorities, approved contractors, utilities and other service providers. Prepare annual facilities plans and budgets and delivery of plans to budget maximising value for money without detriment to quality or scope of service provision. Preparation/Analysis of facilities management KPIs and performance reports for business management Project management or professional FM support to site related project and capital expenditure works including development, planning, costing, site moves and delivery, working closely with related supporting functions and management of subcontractor. Ensure delivery of facilities priorities to meet special security requirements and compliance. Management and delivery of facilities contingencies and emergency procedures in line with the incident management plan Lead point of contact for stakeholder and group requirements in relation to facilities/property Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Proven HSE-FM experience in a manufacturing environment Professional level knowledge of Facilities, Health, Safety, Environmental and Energy Legislation, statutory compliance for all SBU jurisdictions and HSE best practice thinking. Team management/leadership competencies for direct reporting teams, contract teams and dotted line teams Good written and verbal communication and influencing skills. Good IT user skills (MS Office/MS Project/Visio) Ability to continually and constructively challenge and influence stakeholders to prioritize and delivery safety excellence. Ability to obtain a UKSV security clearance. Understanding FM Foundation Course NEBOSH (National Examination Board in Occupational Safety and Health) General Certificate (NGC1 & NGC2) and NEBOSH Diploma NEBOSH Fire safety & Risk Management (FC1 & FC2) IEMA (Institute of Environmental Management) Associate Certificate in Environmental Management Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch:
Apr 24, 2024
Full time
Want to join a trusted and reputable company with a broad portfolio of capabilities across the Maritime domain? Overview Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK for 5 years. Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. Office site presence, anticipated 2-3 days onsite, depending on project needs. Want to work for a successful business, who develop advanced specialist systems to deliver warfighting edge in the modern maritime and underwater battlespace? The company have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! The Health & Safety function is responsible for maintaining and continually improving the Safety Management System and for ensuring that all statutory and legislative requirements are met. The function supports the business in the identification and delivery of all H&S training for employees and managers and manages the internal audit programme. An individual at this grade leads large teams to input into the plans of the function. Will be responsible for implementing policy and ensuring delivery within area of responsibility, linking with other parts of the function or business. Key Responsibilities: Health, Safety, Environment and Energy Oversight of the implementation/operation of the Health and Safety, Environmental and Energy Management Systems Coaching and influencing site leadership and teams to achieve SBU certification aspirations (e.g., ISO 14001, 45001 and 50001) Ensure an HSE programme is in place in to implement EHS + E management systems to include risk assessments, safety tours, hazard identification, accident/near miss/incident investigation/reporting, internal/external auditing, waste stream and emissions management, Energy Profile management, regulatory compliance management Agreeing meaningful and stretching HSE objectives and targets and challenging progress of associated programme plans, aligned to Energy's strategy. Preparation/analysis of monthly HSE management reports (including KPI data) Engage and motivate site leadership and teams through HSE events, communications, and safety walls. Professional oversight of HSE statutory and legislative requirements and liaising with relevant authorities Management of HSE training coverage and completion. Site level implementation of an SBU internal governance and management assurance programmes Facilities Management Management of the facilities services provision at the three sites. Oversight of planned preventative maintenance schedules covering all statutory and non-statutory tasks at 3 Location across the UK. Appointment and management of key service providers for FM activities and monitoring performance against SLA's/KPI's Liaise and negotiate with landlords, agents, local authorities, approved contractors, utilities and other service providers. Prepare annual facilities plans and budgets and delivery of plans to budget maximising value for money without detriment to quality or scope of service provision. Preparation/Analysis of facilities management KPIs and performance reports for business management Project management or professional FM support to site related project and capital expenditure works including development, planning, costing, site moves and delivery, working closely with related supporting functions and management of subcontractor. Ensure delivery of facilities priorities to meet special security requirements and compliance. Management and delivery of facilities contingencies and emergency procedures in line with the incident management plan Lead point of contact for stakeholder and group requirements in relation to facilities/property Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Proven HSE-FM experience in a manufacturing environment Professional level knowledge of Facilities, Health, Safety, Environmental and Energy Legislation, statutory compliance for all SBU jurisdictions and HSE best practice thinking. Team management/leadership competencies for direct reporting teams, contract teams and dotted line teams Good written and verbal communication and influencing skills. Good IT user skills (MS Office/MS Project/Visio) Ability to continually and constructively challenge and influence stakeholders to prioritize and delivery safety excellence. Ability to obtain a UKSV security clearance. Understanding FM Foundation Course NEBOSH (National Examination Board in Occupational Safety and Health) General Certificate (NGC1 & NGC2) and NEBOSH Diploma NEBOSH Fire safety & Risk Management (FC1 & FC2) IEMA (Institute of Environmental Management) Associate Certificate in Environmental Management Experience in the following would be desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch:
AWE is currently recruiting for a Shift-based Facility Engineer to be responsible for delivering professional engineering services to enable the Principal Asset Engineer in fulfilment of the strategy for the upkeep of all assets and equipment AWE needs in order to deliver the Programme. The hiring manager is willing to consider Engineers with mechanical, electrical or electronics/C&I backgrounds. Location: Reading/Basingstoke area Package: 35,720- 49,000 per annum - Shift allowances apply once on shift rotation. This role will initially be standard working hours until the completion of training and attachment to a control room (or support) shift. AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Market leading contributory pension scheme AWE Life Insurance Salary sacrifice benefits scheme Relocation allowance Working for one of the area's largest employers and enjoying an excellent work/life balance, our engineers gain experience on a wide variety of equipment and projects and can make a direct and visible contribution to the successful running of the business. We currently have excellent opportunities for Facility Engineers at all levels and disciplines to work within our engineering function on a variety of projects. You could be providing professional mechanical engineering services in support of operational requirements, which include professionally advising planned preventative and reactive maintenance to all key plant and equipment to help enable the crucial work we do at AWE, and completing engineering tasks to schedule, budget and quality requirements, optimising the delivery of operations engineering. What you will be responsible for: Apply technical knowledge for engineered systems and structures Interpret and deliver requirements from the order book which may include troubleshooting, quoting, reporting, design, commissioning and handover as required Identify and escalate business risk where applicable to plant and engineered systems Make evidence-based engineering decisions to solve technical problems Deliver shift engineering services for the Facility Control Room. May be required to undertake additional roles required for the delivery of the core role (including but not limited to: Risk Assessor, AP, NP, On-Call, shift). To be successful in this role you will need to have: HNC/HND with suitable additional experience Proven ability to deliver engineering across similar manufacturing/research environment incorporating infrastructure facilities, plant and equipment Experience of delivering facilities engineering and maintenance services across the life of an asset You will be required to partake in an additional SQEP training and assessment phase for the shift role and will not attract the appropriate allowances until released by task management to undertake those roles and attached to a specific shift team. If assessed as unsuitable to undertake Control Room duties, you will revert to Facility Engineer duties by suitable discipline, in line with the core role described above. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Apr 24, 2024
Full time
AWE is currently recruiting for a Shift-based Facility Engineer to be responsible for delivering professional engineering services to enable the Principal Asset Engineer in fulfilment of the strategy for the upkeep of all assets and equipment AWE needs in order to deliver the Programme. The hiring manager is willing to consider Engineers with mechanical, electrical or electronics/C&I backgrounds. Location: Reading/Basingstoke area Package: 35,720- 49,000 per annum - Shift allowances apply once on shift rotation. This role will initially be standard working hours until the completion of training and attachment to a control room (or support) shift. AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Market leading contributory pension scheme AWE Life Insurance Salary sacrifice benefits scheme Relocation allowance Working for one of the area's largest employers and enjoying an excellent work/life balance, our engineers gain experience on a wide variety of equipment and projects and can make a direct and visible contribution to the successful running of the business. We currently have excellent opportunities for Facility Engineers at all levels and disciplines to work within our engineering function on a variety of projects. You could be providing professional mechanical engineering services in support of operational requirements, which include professionally advising planned preventative and reactive maintenance to all key plant and equipment to help enable the crucial work we do at AWE, and completing engineering tasks to schedule, budget and quality requirements, optimising the delivery of operations engineering. What you will be responsible for: Apply technical knowledge for engineered systems and structures Interpret and deliver requirements from the order book which may include troubleshooting, quoting, reporting, design, commissioning and handover as required Identify and escalate business risk where applicable to plant and engineered systems Make evidence-based engineering decisions to solve technical problems Deliver shift engineering services for the Facility Control Room. May be required to undertake additional roles required for the delivery of the core role (including but not limited to: Risk Assessor, AP, NP, On-Call, shift). To be successful in this role you will need to have: HNC/HND with suitable additional experience Proven ability to deliver engineering across similar manufacturing/research environment incorporating infrastructure facilities, plant and equipment Experience of delivering facilities engineering and maintenance services across the life of an asset You will be required to partake in an additional SQEP training and assessment phase for the shift role and will not attract the appropriate allowances until released by task management to undertake those roles and attached to a specific shift team. If assessed as unsuitable to undertake Control Room duties, you will revert to Facility Engineer duties by suitable discipline, in line with the core role described above. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role This is a very exciting opportunity for a motivated and experienced individual to thrive in a fast-paced and innovative environment. The engineer will be confident in their abilities to research and identify cutting-edge solutions for novel and challenging problems, whilst taking pride in their attention to detail and design integrity. The role seeks an engineer with a good understanding of powertrain architectures, power distribution systems, and experience with the design and test of various power supply topologies. Familiarity in the field of wide-bandgap semiconductors like Silicon Carbide (SiC) and Gallium Nitride (GaN) is desired but not essential. All of our engineers from time to time are required to manage projects, the successful candidate will therefore show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills for working across all departments within the organisation. Essentials: Create new electronics designs from first principle, through the development lifecycle to production release Power supply design AD-DC, DC-DC, Inversion Experience with one or more of the following topologies: Phase-Shift Full-Bridge, Resonant LLC Half/Full-Bridge, Flyback, Buck/Boost, 3-Phase Inverter (up to 100kW) General knowledge of power switching devices - MOSFETs, Si-IGBT (Wide-Bandgap desired) Experience with the design and optimisation of gate-drive circuitry High Frequency Transformer and Magnetics design A good understanding of thermal management techniques for through-hole and surface mount devices The ability to use modelling and simulation to facilitate design and prototyping Good knowledge in both digital and analogue design concepts Design for LVD/EMC Compliance Development of requirements specifications and test procedures System level integration and testing Experience of filter design and implementation Desirables: High Voltage Experience up to 5kV Thermal modelling experience Motor design and control (BLDC, PMSM, Induction, Axial/Radial Flux) Embedded, FPGA, CPLD Serial Comms Protocol: Ethernet, SPI, I2C, CAN, CAN-FD General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
Apr 24, 2024
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role This is a very exciting opportunity for a motivated and experienced individual to thrive in a fast-paced and innovative environment. The engineer will be confident in their abilities to research and identify cutting-edge solutions for novel and challenging problems, whilst taking pride in their attention to detail and design integrity. The role seeks an engineer with a good understanding of powertrain architectures, power distribution systems, and experience with the design and test of various power supply topologies. Familiarity in the field of wide-bandgap semiconductors like Silicon Carbide (SiC) and Gallium Nitride (GaN) is desired but not essential. All of our engineers from time to time are required to manage projects, the successful candidate will therefore show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills for working across all departments within the organisation. Essentials: Create new electronics designs from first principle, through the development lifecycle to production release Power supply design AD-DC, DC-DC, Inversion Experience with one or more of the following topologies: Phase-Shift Full-Bridge, Resonant LLC Half/Full-Bridge, Flyback, Buck/Boost, 3-Phase Inverter (up to 100kW) General knowledge of power switching devices - MOSFETs, Si-IGBT (Wide-Bandgap desired) Experience with the design and optimisation of gate-drive circuitry High Frequency Transformer and Magnetics design A good understanding of thermal management techniques for through-hole and surface mount devices The ability to use modelling and simulation to facilitate design and prototyping Good knowledge in both digital and analogue design concepts Design for LVD/EMC Compliance Development of requirements specifications and test procedures System level integration and testing Experience of filter design and implementation Desirables: High Voltage Experience up to 5kV Thermal modelling experience Motor design and control (BLDC, PMSM, Induction, Axial/Radial Flux) Embedded, FPGA, CPLD Serial Comms Protocol: Ethernet, SPI, I2C, CAN, CAN-FD General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
Important: Due to the nature of the role, all candidates will need to be prepared to undertake DV clearance and therefore as a minimum be living in the UK 10 years. Working: Possible Flexible and some remote working potentials. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Full range of company benefits, flexible working, training, development and clear career progression! The Opportunity We protect highly sensitive information, working with nations worldwide to help ensure their information is secure as possible. Our engineers work on the most difficult cybersecurity challenges to protect our national security and critical infrastructure; we strive to protect what matters. Carrying out Safety and Reliability activities associated with Cyber UK products as part of our engineering team, within the Cyber UK Business Unit, delivering multiple concurrent research, development and production programmes ranging from tens of k to several m. Responsible for / Key responsibilities Perform requirements and design assessments to ensure that hazards are identified, assessed, eliminated and/or controlled in a systematic way through the development life cycle. Carry out safety and reliability activities (hazard analysis, safety assessment analysis, failure mode analysis, generating FMEA/FMECA) with the goal of prevention, detection and correction of design anomalies, weak parts and workmanship, thereby influencing the design and development of Cyber UK products. As this role covers a wide range of experience the successful candidate will have a good foundation in Safety and Reliability engineering and is passionate about furthering their learning and development within the Safety and Reliability discipline. Produce safety and reliability documentation, including planning documents, in line with company standards to meet project requirements. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used by engineering development and propose changes. Experience with the following Defence standards: Def Stan 00-56, 00-40, 00-45, 00-45, MIL-STD 1629, MIL-HDB 217F, ARP4761 (for Airbourne Products) Manage security of information as defined in the Security manual. Experience in some of the following areas would be advantageous, but not mandatory to be considered for this role. Capability to review electronic design and development within a Safety and Reliability context. Understanding and experience of data capture in terms of Technical Publications, Training, Contractor Logistic Support (CLS), Integrated Logistics Support (ILS), Logistic Support Analysis (LSA) and WLC/LCC Awareness of supportability aspects of a programme. Essential Qualifications / Skills Degree in an engineering, mathematical or science-based subject or equivalent experience Proficient in the full life cycle development demonstrated multiple projects. Proficient in safety & reliability tools e.g. for developing FMEA / FMECA. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Pro-active and self-motivated with good problem solving experience. Learns quickly, willing to think "outside the box" using rigorous logic and methods to solve complex problems Helpful and assistive approach to resolution of technical challenges and understands the need to change where necessary and adjusts accordingly. Desirable Qualifications / Skills Experience of/exposure to best practice development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For full information, please get in touch.
Apr 24, 2024
Full time
Important: Due to the nature of the role, all candidates will need to be prepared to undertake DV clearance and therefore as a minimum be living in the UK 10 years. Working: Possible Flexible and some remote working potentials. Want to Join a business who's capabilities address the highest classification levels of High Grade and Type 1 National Security, across a growing and thriving sector? A reputable business who, have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Brand new site for 2023! Full range of company benefits, flexible working, training, development and clear career progression! The Opportunity We protect highly sensitive information, working with nations worldwide to help ensure their information is secure as possible. Our engineers work on the most difficult cybersecurity challenges to protect our national security and critical infrastructure; we strive to protect what matters. Carrying out Safety and Reliability activities associated with Cyber UK products as part of our engineering team, within the Cyber UK Business Unit, delivering multiple concurrent research, development and production programmes ranging from tens of k to several m. Responsible for / Key responsibilities Perform requirements and design assessments to ensure that hazards are identified, assessed, eliminated and/or controlled in a systematic way through the development life cycle. Carry out safety and reliability activities (hazard analysis, safety assessment analysis, failure mode analysis, generating FMEA/FMECA) with the goal of prevention, detection and correction of design anomalies, weak parts and workmanship, thereby influencing the design and development of Cyber UK products. As this role covers a wide range of experience the successful candidate will have a good foundation in Safety and Reliability engineering and is passionate about furthering their learning and development within the Safety and Reliability discipline. Produce safety and reliability documentation, including planning documents, in line with company standards to meet project requirements. Accurately estimates work of self and others; identifies cost-effective solutions in terms of both development time and materials; delivers predictably and increases team's ability to do the same. Requires only general direction to perform effectively; is not subject to supervision or close management. Generate inputs required for product level design reviews. Reviews and signs off significant technical documents. Provides specialist knowledge and support to the wider engineering team; recognised as a domain expert inside the company, and possibly with external bodies. Mentors and coaches less experienced engineers; shares knowledge willingly and constructively. Proposes and champions ideas for improvement that support innovation and make the engineering organisation more efficient. Actively look for opportunities to improve processes used by engineering development and propose changes. Experience with the following Defence standards: Def Stan 00-56, 00-40, 00-45, 00-45, MIL-STD 1629, MIL-HDB 217F, ARP4761 (for Airbourne Products) Manage security of information as defined in the Security manual. Experience in some of the following areas would be advantageous, but not mandatory to be considered for this role. Capability to review electronic design and development within a Safety and Reliability context. Understanding and experience of data capture in terms of Technical Publications, Training, Contractor Logistic Support (CLS), Integrated Logistics Support (ILS), Logistic Support Analysis (LSA) and WLC/LCC Awareness of supportability aspects of a programme. Essential Qualifications / Skills Degree in an engineering, mathematical or science-based subject or equivalent experience Proficient in the full life cycle development demonstrated multiple projects. Proficient in safety & reliability tools e.g. for developing FMEA / FMECA. Has a variety of engineering methods and techniques; applies and adapts these as necessary to create solutions. Proven experience with Engineering design methodologies. For example, the 'V' Model - Requirements, architecture, detailed design, Implementation, Integration, Test, Validation & Verification. Ability to read, interpret and understand hardware schematics. Experience of version control, change control and bug tracking tools and systems. Pro-active and self-motivated with good problem solving experience. Learns quickly, willing to think "outside the box" using rigorous logic and methods to solve complex problems Helpful and assistive approach to resolution of technical challenges and understands the need to change where necessary and adjusts accordingly. Desirable Qualifications / Skills Experience of/exposure to best practice development processes/lifecycles. Experience of/exposure to continuous integration and automated test tools and frameworks. Experience of DOORS and Enterprise Architect. Experience in Digital Electronics and Digital Logic Design. Experience in developing military equipment. Experience in developing UK High Grade Crypto products. For full information, please get in touch.
Electronics Engineer 12 Month contract Bolton based Offering 35ph Inside IR35 Are you an experienced Electronics Engineer? Do you have experience in calibrating test equipment? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! You will be an Electronics Engineer working with a leading Defence and Aerospace company where you will be involved with the Calibration & Maintenance team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). Due to the nature of the role SC clearance will be required. What you will be involved in: Calibrating test/measuring equipment to defined instructions, handbooks, drawings, or specifications and providing technical advice/guidance on C&M measurement. Provide technical support to Operators/Technicians within the C&M department. Maintain and repair test/measuring equipment to component level. Generating clear and comprehensive calibration/maintenance records for traceability purposes. Safety systems testing of Test and measuring equipment in line with documented procedures. Test facility commissioning and acceptance ensuring configuration control of equipment and facilities. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Assessment of related equipment issues and directing support services to resolve equipment failures. Represent the Calibration department at Integrated Production Team meetings to provide technical information/advice when requested Skillset/experience required: Minimum qualification: HNC in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to the component level. Good understanding of calibration principles and processes. Able to deal with multiple issues, tasks, and priorities concurrently. Analytical and problem-solving skills. Good communication skills with the ability to tailor communication to the relevant audience. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electronics Engineer 12 Month contract Bolton based Offering 35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Apr 24, 2024
Contractor
Electronics Engineer 12 Month contract Bolton based Offering 35ph Inside IR35 Are you an experienced Electronics Engineer? Do you have experience in calibrating test equipment? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! You will be an Electronics Engineer working with a leading Defence and Aerospace company where you will be involved with the Calibration & Maintenance team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). Due to the nature of the role SC clearance will be required. What you will be involved in: Calibrating test/measuring equipment to defined instructions, handbooks, drawings, or specifications and providing technical advice/guidance on C&M measurement. Provide technical support to Operators/Technicians within the C&M department. Maintain and repair test/measuring equipment to component level. Generating clear and comprehensive calibration/maintenance records for traceability purposes. Safety systems testing of Test and measuring equipment in line with documented procedures. Test facility commissioning and acceptance ensuring configuration control of equipment and facilities. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Assessment of related equipment issues and directing support services to resolve equipment failures. Represent the Calibration department at Integrated Production Team meetings to provide technical information/advice when requested Skillset/experience required: Minimum qualification: HNC in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to the component level. Good understanding of calibration principles and processes. Able to deal with multiple issues, tasks, and priorities concurrently. Analytical and problem-solving skills. Good communication skills with the ability to tailor communication to the relevant audience. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electronics Engineer 12 Month contract Bolton based Offering 35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.