Senior Electronics Engineer Production (AC/DC) Norfolk Permanent £competitive salaries Our research and development client specialises in electric motors, controllers, and inverters for vehicles and equipment. They are looking to recruit a Senior Electronics Engineer Production (AC/DC) to join their Electronics Engineering team. JOB DESCRIPTION Purpose The Senior Electronic Engineer is an integral member of the project team responsible for delivering development projects of varying size and complexity. The Senior Electronics Engineer is responsible for the power electronics hardware design on multiple projects and will be responsible for the control, sensing, communications, and thermal requirements of the design under the direction of the Lead electronics engineer taking designs into production. The role reports to the Lead Electronics Engineer. Duties Working closely with the Engineering team to ensure projects are worked to time and within budget. Assisting the lead electronics engineer with project timelines, budgets, and resource requirements. Liaising with firmware team to ensure that company coding standards are adhered to and that resources are aligned to deliver project functional requirements Designing AC/DC converters, with the application of low voltage battery charging to a written specification. Taking design from concept schematic through to release for manufacture/certification using the company processes Lead all manufacturing requirements and processes required for AC/DC designs, including such processes as FMEA, DFM/DFA and Verification and Validation plans/reports Carrying out feasibility studies for new technical innovations. Supporting test engineers to carry out testing where required. Test, Develop and verify design against specification in accordance with companies values, policies & process. Writing test plans to a high standard and in place before any testing conducted with reports completed aligned with the verification and validation process. Contributing to the ongoing improvement of the standard design process. Accountabilities Ensure company standards are met for hardware designs, both regulatory & practice, both in designs and design methodology Power electronics development aspects of AC/DC converters and their application to battery charging and integration into motor controllers. Ensure deliverables are met in accordance with the project plans, assessing resources required to complete work packages, communicating any problems / updates to leadership team Maintain a safe, clean, and orderly environment reflective of HSE principles Person Specification Process driven with the ability to enhance, improve and develop processes as the business grows and looks to continuously improve Exceptional attention to detail and capable of maintaining high standards even under pressure, produces accurate results Passionate and driven to deliver value to the business Technically strong with a commercial mindset Problem solving and resourceful focuses on cause, not symptom, proactive approach and can identify best use of resources to deliver value Accountable takes responsibility for outputs and actions Constructively challenge able to positively challenge the status quo to realise benefit Support QA and continuous improvement Can do, Will do approach. Will walk the extra mile as required. Qualifications Degree in an engineering related discipline or relevant experience/qualification Ideally working to or achieved a chartered status or equivalent as part of personal development plan. Experience Essential Experience of working within an engineering or manufacturing based organisation. Working experience with full-bridge, push-pull and forward isolated converters for inverter and battery charging systems, 2-5kW+ single phase, good experience of LLC converters, PFC and input filtering Experience of various battery chemistries (Li-ion, Lifepo4, Lead Acid) Simulation experience of complex circuitry using such programs such as Simulink, Matlab, Simetrix or LTSpice Experience using Electronics CAD Software (Preferred Altium) Understanding of thermal management requirements for electronics and working in a multi-disciplinary team to find solutions for thermal design considerations Experience in a product development environment, familiar with New Product Introduction (NPI) Primary Design Review (PDR), Critical Design Review (CDR), First Article Inspection (FAI) Verification and Validation (V&V) In depth knowledge of both theoretical and practical aspects of electronic engineering Understanding of firmware design & control considerations needed when developing hardware which must interface with a programmable block. Analogue design of current and voltage sensing systems and general signal conditioning. Experience in EMC compliance & design considerations Preferred Experience Working experience with additional AC/DC Topologies, i.e. flyback Experience with 3-phase AC to DC systems Experience with bidirectional AC/DC Systems Hands on experience with designing own magnetics. Fundamental understating of proximity losses, skin effect losses, core losses. Deep understanding of material properties in ferromagnetic materials Experience with control loop theory and ability to evaluate system requirements, simulate and work to produce control algorithms Skills/Abilities/Knowledge/Qualities Empathy with the mission, vision, values and ethos of the company Ability to work overseas as required Resilience; ability to cope under pressure Positive about change and continuous improvement Engaging, personable and approachable. Seen to be demonstrably and consistently supportive in working with all staff Process driven; results orientated Can work at pace, with fast changing priorities; shows agility and adaptability Delegation skills Works with a growth mindset Good degree of self- awareness Works in alignment to others, as a default position Planning, organisational and time management skills Team worker with ability to use own initiative IT skills including email, Word, Excel, PowerPoint and MRP software Full driving licence and own vehicle insured for business use To apply please send an MS Word formatted version of your CV for our review and conside JBRP1_UKTJ
Apr 24, 2024
Full time
Senior Electronics Engineer Production (AC/DC) Norfolk Permanent £competitive salaries Our research and development client specialises in electric motors, controllers, and inverters for vehicles and equipment. They are looking to recruit a Senior Electronics Engineer Production (AC/DC) to join their Electronics Engineering team. JOB DESCRIPTION Purpose The Senior Electronic Engineer is an integral member of the project team responsible for delivering development projects of varying size and complexity. The Senior Electronics Engineer is responsible for the power electronics hardware design on multiple projects and will be responsible for the control, sensing, communications, and thermal requirements of the design under the direction of the Lead electronics engineer taking designs into production. The role reports to the Lead Electronics Engineer. Duties Working closely with the Engineering team to ensure projects are worked to time and within budget. Assisting the lead electronics engineer with project timelines, budgets, and resource requirements. Liaising with firmware team to ensure that company coding standards are adhered to and that resources are aligned to deliver project functional requirements Designing AC/DC converters, with the application of low voltage battery charging to a written specification. Taking design from concept schematic through to release for manufacture/certification using the company processes Lead all manufacturing requirements and processes required for AC/DC designs, including such processes as FMEA, DFM/DFA and Verification and Validation plans/reports Carrying out feasibility studies for new technical innovations. Supporting test engineers to carry out testing where required. Test, Develop and verify design against specification in accordance with companies values, policies & process. Writing test plans to a high standard and in place before any testing conducted with reports completed aligned with the verification and validation process. Contributing to the ongoing improvement of the standard design process. Accountabilities Ensure company standards are met for hardware designs, both regulatory & practice, both in designs and design methodology Power electronics development aspects of AC/DC converters and their application to battery charging and integration into motor controllers. Ensure deliverables are met in accordance with the project plans, assessing resources required to complete work packages, communicating any problems / updates to leadership team Maintain a safe, clean, and orderly environment reflective of HSE principles Person Specification Process driven with the ability to enhance, improve and develop processes as the business grows and looks to continuously improve Exceptional attention to detail and capable of maintaining high standards even under pressure, produces accurate results Passionate and driven to deliver value to the business Technically strong with a commercial mindset Problem solving and resourceful focuses on cause, not symptom, proactive approach and can identify best use of resources to deliver value Accountable takes responsibility for outputs and actions Constructively challenge able to positively challenge the status quo to realise benefit Support QA and continuous improvement Can do, Will do approach. Will walk the extra mile as required. Qualifications Degree in an engineering related discipline or relevant experience/qualification Ideally working to or achieved a chartered status or equivalent as part of personal development plan. Experience Essential Experience of working within an engineering or manufacturing based organisation. Working experience with full-bridge, push-pull and forward isolated converters for inverter and battery charging systems, 2-5kW+ single phase, good experience of LLC converters, PFC and input filtering Experience of various battery chemistries (Li-ion, Lifepo4, Lead Acid) Simulation experience of complex circuitry using such programs such as Simulink, Matlab, Simetrix or LTSpice Experience using Electronics CAD Software (Preferred Altium) Understanding of thermal management requirements for electronics and working in a multi-disciplinary team to find solutions for thermal design considerations Experience in a product development environment, familiar with New Product Introduction (NPI) Primary Design Review (PDR), Critical Design Review (CDR), First Article Inspection (FAI) Verification and Validation (V&V) In depth knowledge of both theoretical and practical aspects of electronic engineering Understanding of firmware design & control considerations needed when developing hardware which must interface with a programmable block. Analogue design of current and voltage sensing systems and general signal conditioning. Experience in EMC compliance & design considerations Preferred Experience Working experience with additional AC/DC Topologies, i.e. flyback Experience with 3-phase AC to DC systems Experience with bidirectional AC/DC Systems Hands on experience with designing own magnetics. Fundamental understating of proximity losses, skin effect losses, core losses. Deep understanding of material properties in ferromagnetic materials Experience with control loop theory and ability to evaluate system requirements, simulate and work to produce control algorithms Skills/Abilities/Knowledge/Qualities Empathy with the mission, vision, values and ethos of the company Ability to work overseas as required Resilience; ability to cope under pressure Positive about change and continuous improvement Engaging, personable and approachable. Seen to be demonstrably and consistently supportive in working with all staff Process driven; results orientated Can work at pace, with fast changing priorities; shows agility and adaptability Delegation skills Works with a growth mindset Good degree of self- awareness Works in alignment to others, as a default position Planning, organisational and time management skills Team worker with ability to use own initiative IT skills including email, Word, Excel, PowerPoint and MRP software Full driving licence and own vehicle insured for business use To apply please send an MS Word formatted version of your CV for our review and conside JBRP1_UKTJ
You will be responsible for undertaking the Systems Engineering activities as part of one or more multi-disciplinary project teams, ensuring mechanical, electrical, and software design aspects are coherent and that ultimately the system meets the customer need. You will enjoy the challenges of system complexity and conflicting requirements and have a keen eye for detail. You will be given the opportunity to play a leading role in the delivery of projects with significant levels of responsibility over project risks, cost, and schedule. Key Responsibilities: Requirements Capture and management. Functional and Physical Systems Architecture Design and Definition. System Modelling. Development of Engineering Management Plans (Safety Management, Test Integration & Acceptance, Technical Risk Management). Gathering of verification evidence for System Requirements. Creation of Procurement Specifications for sub-systems and components. Writing test specifications. Conducting Design reviews. Environmental Qualification Plans (EMC, Temperature, Shock & Vibration). Skills & Experience Essential: A good degree in Engineering or physical sciences. Minimum of 5 years' systems engineering experience in a defence engineering (or similar) company. Proficient in the use of requirements management tools (DOORS, Visure or R4J). Work package management in JIRA. Proficient in Report Writing. Desirable: Technical Leadership of project teams with a significant level of responsibility for managing project risks and for delivering on time and on budget. Experience in working closely with internal and external stakeholders. Working in multi-disciplinary teams on projects with a high level of complexity. Safety Management (MIL-STD 882E, DEF-STAN 00-56, ISO 12100:2010). Statutory Compliance (CE Marking). Camera Sensor Technology (InfraRed and visible spectrum, DRI performance). Fault-Tree and Failure Mode Analysis.
Apr 24, 2024
Full time
You will be responsible for undertaking the Systems Engineering activities as part of one or more multi-disciplinary project teams, ensuring mechanical, electrical, and software design aspects are coherent and that ultimately the system meets the customer need. You will enjoy the challenges of system complexity and conflicting requirements and have a keen eye for detail. You will be given the opportunity to play a leading role in the delivery of projects with significant levels of responsibility over project risks, cost, and schedule. Key Responsibilities: Requirements Capture and management. Functional and Physical Systems Architecture Design and Definition. System Modelling. Development of Engineering Management Plans (Safety Management, Test Integration & Acceptance, Technical Risk Management). Gathering of verification evidence for System Requirements. Creation of Procurement Specifications for sub-systems and components. Writing test specifications. Conducting Design reviews. Environmental Qualification Plans (EMC, Temperature, Shock & Vibration). Skills & Experience Essential: A good degree in Engineering or physical sciences. Minimum of 5 years' systems engineering experience in a defence engineering (or similar) company. Proficient in the use of requirements management tools (DOORS, Visure or R4J). Work package management in JIRA. Proficient in Report Writing. Desirable: Technical Leadership of project teams with a significant level of responsibility for managing project risks and for delivering on time and on budget. Experience in working closely with internal and external stakeholders. Working in multi-disciplinary teams on projects with a high level of complexity. Safety Management (MIL-STD 882E, DEF-STAN 00-56, ISO 12100:2010). Statutory Compliance (CE Marking). Camera Sensor Technology (InfraRed and visible spectrum, DRI performance). Fault-Tree and Failure Mode Analysis.
Do you want to play a role in the transition to sustainable energy production? At Aker Solutions we are committed to helping the energy industry and broader society towards a low-carbon future. We are changemakers and problem solvers with more than 180 years of experience. Our ambitions are high. By 2030, renewables and low-carbon solutions for oil and gas will make up two-thirds of our business. Do you want to be a part of driving the transition? Our Front-End department in Londonis now looking for a Senior Engineer to join the team. What will you be doing? Produce Electrical Design Philosophies for both Greenfield and Brownfield projects for both onshore and offshore. Production of Key Overall SLDs designs and drafting of SLDs. Production of Load Lists based on MELs. Input into overall Basis of Design documents. Production of electrical section of design reports. Work to produce layouts of electrical equipment including weight estimates. Input into cost and scheduling estimates. Help produce heat load emissions of electrical equipment for HVA/C and Process requirements. Work closely with other disciplines such as Process, Mechanical, Structural, Control and Instrumentation and Technical Safety, weight control engineers to develop Concept and Pre-Feed solutions. Work closely with Clients including face to face meetings and presentations. Work closely with external Power System Analysis consultants to give requirements of study and to review study results. Checking and review of electrical documents and other disciplines documents. Typical projects are HVDC and HVAC offshore substations, electrification of existing offshore Oil and Gas platforms, green hydrogen plants, Oil and Gas facilities and Carbon Capture plants. We think you should have: Minimum BSc or BEng degree. Minimum 10 years' experience, including: Experience of Concept and Pre-FEED projects Experience of Greenfield and Brownfield projects Use of Power System Analysis software such as ETAP or PowerFactory to carry out short circuit, load flow and motor starting studies. Experience of hazardous area electrical equipment Knowledge of high voltage systems at 110kV and 220kV up to 400kV (desirable) Knowledge of equipment such as GIS, Power Generation, Power Transformers, HV switchgear, MCCs, AC and DC UPS, PMS, cables, motors, NERs, VSDs, soft starters and emergency power generation. Preferable to have both onshore and offshore experience. Knowledge of EMC, earthing and lightning protection. Knowledge of IEC standards and EU Directives. Knowledge of Excel, Word, XaitPorter and CAD programs. More reasons to work with us: Professional development and career opportunities Competitive pay and benefits Healthy work-life balance Immediate proximity to public transportation Join a company committed to becoming a significant player in the energy transition Interested? Contact us. For more information about the position, please contact Lloyd Odili, Regional Lead : email NES Advantage is Aker Solutions' global recruitment services provider responsible for permanent and temporary staffing service. Diversity, Equity and Inclusion Our goal is to make Aker Solutions a place where everyone can perform at their best by creating opportunities for all. We see diversity as a source of creativity, innovation, and as a key competitive advantage. Diversity includes not only gender, ethnicity, or age but also disabilities, religion, sexual orientation, and many other parts of one's identity. We welcome your application no matter who you are or where you come from and encourage you to let us know if you need any supportive adjustments throughout the recruitment process. This is Aker Solutions Aker Solutions delivers integrated solutions, products and services to the global energy industry. We enable low-carbon oil and gas production and develop renewable solutions to meet future energy needs. By combining innovative digital solutions and predictable project execution we accelerate the transition to sustainable energy production. Aker Solutions employs approximately 11,000 people in more than 15 countries.
Apr 24, 2024
Full time
Do you want to play a role in the transition to sustainable energy production? At Aker Solutions we are committed to helping the energy industry and broader society towards a low-carbon future. We are changemakers and problem solvers with more than 180 years of experience. Our ambitions are high. By 2030, renewables and low-carbon solutions for oil and gas will make up two-thirds of our business. Do you want to be a part of driving the transition? Our Front-End department in Londonis now looking for a Senior Engineer to join the team. What will you be doing? Produce Electrical Design Philosophies for both Greenfield and Brownfield projects for both onshore and offshore. Production of Key Overall SLDs designs and drafting of SLDs. Production of Load Lists based on MELs. Input into overall Basis of Design documents. Production of electrical section of design reports. Work to produce layouts of electrical equipment including weight estimates. Input into cost and scheduling estimates. Help produce heat load emissions of electrical equipment for HVA/C and Process requirements. Work closely with other disciplines such as Process, Mechanical, Structural, Control and Instrumentation and Technical Safety, weight control engineers to develop Concept and Pre-Feed solutions. Work closely with Clients including face to face meetings and presentations. Work closely with external Power System Analysis consultants to give requirements of study and to review study results. Checking and review of electrical documents and other disciplines documents. Typical projects are HVDC and HVAC offshore substations, electrification of existing offshore Oil and Gas platforms, green hydrogen plants, Oil and Gas facilities and Carbon Capture plants. We think you should have: Minimum BSc or BEng degree. Minimum 10 years' experience, including: Experience of Concept and Pre-FEED projects Experience of Greenfield and Brownfield projects Use of Power System Analysis software such as ETAP or PowerFactory to carry out short circuit, load flow and motor starting studies. Experience of hazardous area electrical equipment Knowledge of high voltage systems at 110kV and 220kV up to 400kV (desirable) Knowledge of equipment such as GIS, Power Generation, Power Transformers, HV switchgear, MCCs, AC and DC UPS, PMS, cables, motors, NERs, VSDs, soft starters and emergency power generation. Preferable to have both onshore and offshore experience. Knowledge of EMC, earthing and lightning protection. Knowledge of IEC standards and EU Directives. Knowledge of Excel, Word, XaitPorter and CAD programs. More reasons to work with us: Professional development and career opportunities Competitive pay and benefits Healthy work-life balance Immediate proximity to public transportation Join a company committed to becoming a significant player in the energy transition Interested? Contact us. For more information about the position, please contact Lloyd Odili, Regional Lead : email NES Advantage is Aker Solutions' global recruitment services provider responsible for permanent and temporary staffing service. Diversity, Equity and Inclusion Our goal is to make Aker Solutions a place where everyone can perform at their best by creating opportunities for all. We see diversity as a source of creativity, innovation, and as a key competitive advantage. Diversity includes not only gender, ethnicity, or age but also disabilities, religion, sexual orientation, and many other parts of one's identity. We welcome your application no matter who you are or where you come from and encourage you to let us know if you need any supportive adjustments throughout the recruitment process. This is Aker Solutions Aker Solutions delivers integrated solutions, products and services to the global energy industry. We enable low-carbon oil and gas production and develop renewable solutions to meet future energy needs. By combining innovative digital solutions and predictable project execution we accelerate the transition to sustainable energy production. Aker Solutions employs approximately 11,000 people in more than 15 countries.
Enterprise Control Systems Limited
Towcester, Northamptonshire
Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. Were a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, Enterprise Control Systems (ECS) is a leading supplier of long range data links that support real time high resolution video transfer between air and ground users. In creating products like RF inhibitors and specialized equipment for military and security purposes, we protect ground forces and infrastructure around the world. How you will make an Impact SPX is a diverse team of unique individuals who all make an impact. As a Senior Hardware Design Engineer for CommTech (Enterprise Control Systems & TCI), you will play a crucial role in New Product Introduction (NPI) and Sustaining Engineering for products within our Battlespace, Datalinks and SMS markets. You will be joining a small dynamic team continually designing and developing world beating products. As a Senior Hardware Design Engineer you will be expected to join our RF and Hardware group and be involved in the full product lifecycle including requirements, design, test, release and support of new digital, analogue and RF designs. This is an opportunity to work in a fast paced but rewarding environment on RF Technologies across a number of exciting markets including defense and aerospace. What you can expect in this role While each day brings new opportunities at SPX, your core responsibilities will be: 1. Design including but not limited to; Design of electronic circuits, subsystems and systems of varying complexity crossing analog, digital and RF (desirable) domains. Complete electronic design including; o Schematic capture. o Layout capture o Footprint/symbol creation Maintenance and update of Altium Library and templates Scoping of new systems and technologies both for feasibility and product design. Managing of external design houses and resource as required 2. Technical Support and Testing Production and Manufacturing assistance as required. Trouble shooting of hardware and system issues seen from all areas of the business Self testing and troubleshooting of your own design and development work. Testing, troubleshooting and updating of existing design and development work produced by other engineers for our products. Complete Design Reviews Verification of designs against requirement Specifications Mentoring of lower grades assigned to your design function as and when needed. 3. Documentation and Communication including but not limited to; Provide task time estimates and risk considerations to the project manager and/or RF and Hardware group manager. Weekly standup meeting to communicate previous weeks achievements and current weeks priorities. Organise and lead technical projects including being the lead of Preliminary, Interim and Critical Design Reviews as dictated by company procedures Participate in Design Reviews and Project meetings being led by others. Contribute to department processes and procedures Creation of design pack documentation Creation of User Information and manuals when required. Assisting Principal Design Engineer and Project leads with project plans. Collaboration and communication with full engineering team including interacting with other Engineering disciplines to achieve department targets. What we are looking for We each bring something to the table, and we are looking for someone who has: Required Experience Solid experience in an equivalent role The following skills and experience will be required. Candidates are not expected to have experience in all areas; o Digital circuit design including micro-processors, FPGAs and associated high speed peripherals. o Analogue circuit design such as power supplies. o RF circuit design o Layout experience. o EMC and CE marking experience. o Design for IPC Practical experience of PCB bring up and test Self-motivated and enthusiastic. Strong team player with good interpersonal skills. Ability to work in a team and interact with other Engineering disciplines. Ability to produce results under pressure Good analytical skills. Preferred Experience, Knowledge, Skills, and Abilities Extensive experience in an equivalent role. An understanding of products aligned with CommTechs portfolio. Experience with Altium Designer The following skills and experience would also be beneficial; o Basic embedded firmware skills used to exercise and test hardware designs. o Experience of designing electronic circuits and sub-assemblies for use in military or airborne applications. o Experience of designing for and test/verification MIL-STDs and DO160. o Test and verification using tools such as JTAG Boundary Scan Testing o Experience of test equipment such as oscilloscopes, analysers and signal generators. Education & Certifications Required is a Bachelors degree in Electronics or related subject (or work experience equivalent to) Masters in Electronics or related subject is desirable. Security British Citizen or ability to obtain required security clearance. Travel & Working Environment Travel unlikely Onsite working including working from home policy. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realise their fullest potential. JBRP1_UKTJ
Apr 24, 2024
Full time
Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. Were a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, Enterprise Control Systems (ECS) is a leading supplier of long range data links that support real time high resolution video transfer between air and ground users. In creating products like RF inhibitors and specialized equipment for military and security purposes, we protect ground forces and infrastructure around the world. How you will make an Impact SPX is a diverse team of unique individuals who all make an impact. As a Senior Hardware Design Engineer for CommTech (Enterprise Control Systems & TCI), you will play a crucial role in New Product Introduction (NPI) and Sustaining Engineering for products within our Battlespace, Datalinks and SMS markets. You will be joining a small dynamic team continually designing and developing world beating products. As a Senior Hardware Design Engineer you will be expected to join our RF and Hardware group and be involved in the full product lifecycle including requirements, design, test, release and support of new digital, analogue and RF designs. This is an opportunity to work in a fast paced but rewarding environment on RF Technologies across a number of exciting markets including defense and aerospace. What you can expect in this role While each day brings new opportunities at SPX, your core responsibilities will be: 1. Design including but not limited to; Design of electronic circuits, subsystems and systems of varying complexity crossing analog, digital and RF (desirable) domains. Complete electronic design including; o Schematic capture. o Layout capture o Footprint/symbol creation Maintenance and update of Altium Library and templates Scoping of new systems and technologies both for feasibility and product design. Managing of external design houses and resource as required 2. Technical Support and Testing Production and Manufacturing assistance as required. Trouble shooting of hardware and system issues seen from all areas of the business Self testing and troubleshooting of your own design and development work. Testing, troubleshooting and updating of existing design and development work produced by other engineers for our products. Complete Design Reviews Verification of designs against requirement Specifications Mentoring of lower grades assigned to your design function as and when needed. 3. Documentation and Communication including but not limited to; Provide task time estimates and risk considerations to the project manager and/or RF and Hardware group manager. Weekly standup meeting to communicate previous weeks achievements and current weeks priorities. Organise and lead technical projects including being the lead of Preliminary, Interim and Critical Design Reviews as dictated by company procedures Participate in Design Reviews and Project meetings being led by others. Contribute to department processes and procedures Creation of design pack documentation Creation of User Information and manuals when required. Assisting Principal Design Engineer and Project leads with project plans. Collaboration and communication with full engineering team including interacting with other Engineering disciplines to achieve department targets. What we are looking for We each bring something to the table, and we are looking for someone who has: Required Experience Solid experience in an equivalent role The following skills and experience will be required. Candidates are not expected to have experience in all areas; o Digital circuit design including micro-processors, FPGAs and associated high speed peripherals. o Analogue circuit design such as power supplies. o RF circuit design o Layout experience. o EMC and CE marking experience. o Design for IPC Practical experience of PCB bring up and test Self-motivated and enthusiastic. Strong team player with good interpersonal skills. Ability to work in a team and interact with other Engineering disciplines. Ability to produce results under pressure Good analytical skills. Preferred Experience, Knowledge, Skills, and Abilities Extensive experience in an equivalent role. An understanding of products aligned with CommTechs portfolio. Experience with Altium Designer The following skills and experience would also be beneficial; o Basic embedded firmware skills used to exercise and test hardware designs. o Experience of designing electronic circuits and sub-assemblies for use in military or airborne applications. o Experience of designing for and test/verification MIL-STDs and DO160. o Test and verification using tools such as JTAG Boundary Scan Testing o Experience of test equipment such as oscilloscopes, analysers and signal generators. Education & Certifications Required is a Bachelors degree in Electronics or related subject (or work experience equivalent to) Masters in Electronics or related subject is desirable. Security British Citizen or ability to obtain required security clearance. Travel & Working Environment Travel unlikely Onsite working including working from home policy. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realise their fullest potential. JBRP1_UKTJ
Earthstream are proud to be recruiting a Senior Electrical/Hardware Design Engineer for a true leader in advanced systems integration with a focus on operational technology & digital transformation for some of the most highly regulated and challenging industrial environments. Job Role: Senior Electrical/Hardware Design Engineer Location: Stone Rate: Negotiable on skills and experience Length of Contract: 6 Months As a Senior Electrical/Hardware Design Engineer your remit will include: The role is to design hardware systems mainly using proprietary hardware components for control panels and primarily focused on PLC's, MCCs, Drives & Controls, and Switchgear. Preparing, reviewing and checking necessary calculations and design. The work may involve limited travel with the possibility of some periods away at customer sites carrying out surveys and designing solutions What you will bring to the company: Requirements (Essential): Knowledge of designing electrical panels containing PLC's and LV distribution systems. Design of electrical cabling and containment systems Educated to at least degree level in relevant subject or HND with additional experience on project implementation Good working knowledge of AutoCAD Electrical, Microsoft office word & excel. Must be able to achieve security clearance to at least SC level, and possibly DV It is essential that candidates have excellent communication skills as client contact and mentoring is required. Ability to mentor and develop engineers and technicians A good working knowledge of related safety and environmental legislation. Able to develop technical solutions to meet project and customer expectations Thorough understanding of, or working towards, BS7671 IEE 18th Edition Wiring Regulations Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Confidence to work within a multidisciplinary design team Working with production to see the design through to completion. Requirements (Desirable): Worked previously in a highly regulated industry. Understanding of EMC practices Will hold or will be working towards Chartered or Incorporated Engineering status MEng qualification Advanced written and verbal communication skills in English Site experience (survey /install) JBRP1_UKTJ
Apr 24, 2024
Full time
Earthstream are proud to be recruiting a Senior Electrical/Hardware Design Engineer for a true leader in advanced systems integration with a focus on operational technology & digital transformation for some of the most highly regulated and challenging industrial environments. Job Role: Senior Electrical/Hardware Design Engineer Location: Stone Rate: Negotiable on skills and experience Length of Contract: 6 Months As a Senior Electrical/Hardware Design Engineer your remit will include: The role is to design hardware systems mainly using proprietary hardware components for control panels and primarily focused on PLC's, MCCs, Drives & Controls, and Switchgear. Preparing, reviewing and checking necessary calculations and design. The work may involve limited travel with the possibility of some periods away at customer sites carrying out surveys and designing solutions What you will bring to the company: Requirements (Essential): Knowledge of designing electrical panels containing PLC's and LV distribution systems. Design of electrical cabling and containment systems Educated to at least degree level in relevant subject or HND with additional experience on project implementation Good working knowledge of AutoCAD Electrical, Microsoft office word & excel. Must be able to achieve security clearance to at least SC level, and possibly DV It is essential that candidates have excellent communication skills as client contact and mentoring is required. Ability to mentor and develop engineers and technicians A good working knowledge of related safety and environmental legislation. Able to develop technical solutions to meet project and customer expectations Thorough understanding of, or working towards, BS7671 IEE 18th Edition Wiring Regulations Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Confidence to work within a multidisciplinary design team Working with production to see the design through to completion. Requirements (Desirable): Worked previously in a highly regulated industry. Understanding of EMC practices Will hold or will be working towards Chartered or Incorporated Engineering status MEng qualification Advanced written and verbal communication skills in English Site experience (survey /install) JBRP1_UKTJ
Earthstream are proud to be recruiting a Senior Electrical/Hardware Design Engineer for a true leader in advanced systems integration with a focus on operational technology & digital transformation for some of the most highly regulated and challenging industrial environments. Job Role: Senior Electrical/Hardware Design Engineer Location: Stone Rate: Negotiable on skills and experience Length of Contract: 6 Months As a Senior Electrical/Hardware Design Engineer your remit will include: The role is to design hardware systems mainly using proprietary hardware components for control panels and primarily focused on PLC's, MCCs, Drives & Controls, and Switchgear. Preparing, reviewing and checking necessary calculations and design. The work may involve limited travel with the possibility of some periods away at customer sites carrying out surveys and designing solutions What you will bring to the company: Requirements (Essential): Knowledge of designing electrical panels containing PLC's and LV distribution systems. Design of electrical cabling and containment systems Educated to at least degree level in relevant subject or HND with additional experience on project implementation Good working knowledge of AutoCAD Electrical, Microsoft office word & excel. Must be able to achieve security clearance to at least SC level, and possibly DV It is essential that candidates have excellent communication skills as client contact and mentoring is required. Ability to mentor and develop engineers and technicians A good working knowledge of related safety and environmental legislation. Able to develop technical solutions to meet project and customer expectations Thorough understanding of, or working towards, BS7671 IEE 18th Edition Wiring Regulations Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Confidence to work within a multidisciplinary design team Working with production to see the design through to completion. Requirements (Desirable): Worked previously in a highly regulated industry. Understanding of EMC practices Will hold or will be working towards Chartered or Incorporated Engineering status MEng qualification Advanced written and verbal communication skills in English Site experience (survey /install) JBRP1_UKTJ
Apr 24, 2024
Full time
Earthstream are proud to be recruiting a Senior Electrical/Hardware Design Engineer for a true leader in advanced systems integration with a focus on operational technology & digital transformation for some of the most highly regulated and challenging industrial environments. Job Role: Senior Electrical/Hardware Design Engineer Location: Stone Rate: Negotiable on skills and experience Length of Contract: 6 Months As a Senior Electrical/Hardware Design Engineer your remit will include: The role is to design hardware systems mainly using proprietary hardware components for control panels and primarily focused on PLC's, MCCs, Drives & Controls, and Switchgear. Preparing, reviewing and checking necessary calculations and design. The work may involve limited travel with the possibility of some periods away at customer sites carrying out surveys and designing solutions What you will bring to the company: Requirements (Essential): Knowledge of designing electrical panels containing PLC's and LV distribution systems. Design of electrical cabling and containment systems Educated to at least degree level in relevant subject or HND with additional experience on project implementation Good working knowledge of AutoCAD Electrical, Microsoft office word & excel. Must be able to achieve security clearance to at least SC level, and possibly DV It is essential that candidates have excellent communication skills as client contact and mentoring is required. Ability to mentor and develop engineers and technicians A good working knowledge of related safety and environmental legislation. Able to develop technical solutions to meet project and customer expectations Thorough understanding of, or working towards, BS7671 IEE 18th Edition Wiring Regulations Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies Confidence to work within a multidisciplinary design team Working with production to see the design through to completion. Requirements (Desirable): Worked previously in a highly regulated industry. Understanding of EMC practices Will hold or will be working towards Chartered or Incorporated Engineering status MEng qualification Advanced written and verbal communication skills in English Site experience (survey /install) JBRP1_UKTJ
Are you seeking an opportunity that offers both hands-on work with cutting-edge technology and a collaborative working environment? Do you want the ability to work in a company that still has a start-up feel but is owned by a well-established organisation meaning you get the best of both worlds (the most engaging work and stability)? In this position youll be designing electronics for an Aero-Technologies Innovator. Youll work within a team of 4 electronics engineers who form part of an engineering team of around 50-engineers and counting. Its a reasonably fast paced environment in which youll get to work on multiple projects throughout the entirety of their lifecycle. Youll be working in a top notch facility that has custom built offices within, all glass to give a really nice feel of open plan working with the added bonus of still being able to get your head down when needed. All of the design, development, and testing is done on-site so you will be able to see your work in action before it leaves site. You'll utilise your broad level electronics design experience that includes high-speed, low power (not always), microcontroller based PCBs. This is full life cycle design work that includes lots of new work (not just rejigging off the shelf), schematics, layout, prototype, EMC etc. Youll gain some exceptionally rewarding experience in this position, that will enable you to work on multiple projects and contribute to the company's continued success, meaning good progression opportunities for you moving forward. To excel in this position you will have: Multiple years of experience in electronics design of systems that are microcontroller based, low power and high-speed Experience developing and testing prototypes Your starting salary will be UP TO £75,000 depending on the value you can bring to the team. Benefits package is due to be improved upon imminently but currently offers 25 days holiday + bank holidays, pension, good working environment and amenities etc You should apply now for more information! JBRP1_UKTJ
Apr 24, 2024
Full time
Are you seeking an opportunity that offers both hands-on work with cutting-edge technology and a collaborative working environment? Do you want the ability to work in a company that still has a start-up feel but is owned by a well-established organisation meaning you get the best of both worlds (the most engaging work and stability)? In this position youll be designing electronics for an Aero-Technologies Innovator. Youll work within a team of 4 electronics engineers who form part of an engineering team of around 50-engineers and counting. Its a reasonably fast paced environment in which youll get to work on multiple projects throughout the entirety of their lifecycle. Youll be working in a top notch facility that has custom built offices within, all glass to give a really nice feel of open plan working with the added bonus of still being able to get your head down when needed. All of the design, development, and testing is done on-site so you will be able to see your work in action before it leaves site. You'll utilise your broad level electronics design experience that includes high-speed, low power (not always), microcontroller based PCBs. This is full life cycle design work that includes lots of new work (not just rejigging off the shelf), schematics, layout, prototype, EMC etc. Youll gain some exceptionally rewarding experience in this position, that will enable you to work on multiple projects and contribute to the company's continued success, meaning good progression opportunities for you moving forward. To excel in this position you will have: Multiple years of experience in electronics design of systems that are microcontroller based, low power and high-speed Experience developing and testing prototypes Your starting salary will be UP TO £75,000 depending on the value you can bring to the team. Benefits package is due to be improved upon imminently but currently offers 25 days holiday + bank holidays, pension, good working environment and amenities etc You should apply now for more information! JBRP1_UKTJ
We are seeking a candidate to manage a team of diverse experts in various specialisations on a daily basis, while also handling their own development workload. The ideal candidate should possess outstanding management and technical skills, fostering a collaborative environment within the team. They will play a pivotal role in driving design and innovation, not only within our organisation but also across the Electric Vehicle Charging Industry. This position requires close collaboration so is office-based.Key Responsibilities include supervising and developing the team, ensuring adherence to detailed documentation and reporting standards for new features and releases.Requirements:Bachelor's degree in Electronics Engineering or equivalentProficiency in circuit design, schematic capture, and PCB layoutExperience in board bring-up for digital and analog circuitsFamiliarity and proficiency with Altium 365 and Altium DesignerKnowledge of EMC design principles, industry regulations, and best practicesExperience with lab testing and measurement equipment such as oscilloscopes, power supplies, AC and DC loads, and near-field probesProficiency in C, Embedded C, and C++Familiarity with agile product development practices, project management tools, tool chains, and unit testing softwareExperience with standard tools like compilers and debuggers, especially ARM-basedExperience with micro controllers including ST Microelectronics SM32 series, Espressif, and Atmega, particularly 32-bit variantsStrong problem-solving skillsMinimum of 4 years' experience in a managerial role within an electronics development environment.Piper Maddox is acting as an Employment Agency in relation to this vacancy.
Apr 23, 2024
Full time
We are seeking a candidate to manage a team of diverse experts in various specialisations on a daily basis, while also handling their own development workload. The ideal candidate should possess outstanding management and technical skills, fostering a collaborative environment within the team. They will play a pivotal role in driving design and innovation, not only within our organisation but also across the Electric Vehicle Charging Industry. This position requires close collaboration so is office-based.Key Responsibilities include supervising and developing the team, ensuring adherence to detailed documentation and reporting standards for new features and releases.Requirements:Bachelor's degree in Electronics Engineering or equivalentProficiency in circuit design, schematic capture, and PCB layoutExperience in board bring-up for digital and analog circuitsFamiliarity and proficiency with Altium 365 and Altium DesignerKnowledge of EMC design principles, industry regulations, and best practicesExperience with lab testing and measurement equipment such as oscilloscopes, power supplies, AC and DC loads, and near-field probesProficiency in C, Embedded C, and C++Familiarity with agile product development practices, project management tools, tool chains, and unit testing softwareExperience with standard tools like compilers and debuggers, especially ARM-basedExperience with micro controllers including ST Microelectronics SM32 series, Espressif, and Atmega, particularly 32-bit variantsStrong problem-solving skillsMinimum of 4 years' experience in a managerial role within an electronics development environment.Piper Maddox is acting as an Employment Agency in relation to this vacancy.
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
Apr 23, 2024
Full time
Senior Analog Electronics Engineer - Unleash Your Creativity and Innovation Are you a passionate and skilled analog electronics engineer looking for an opportunity to make a real impact? Lynx is representing a leading technology company seeking a Senior Analog Electronics Engineer to join the team and drive the development of cutting-edge products. In this pivotal role, you will have the freedom to apply your expertise in analog electronics engineering to plan, lead, and execute design tasks with a high degree of independence. Our client encourages creativity and ingenuity in developing technical solutions to complex problems, and you will have the opportunity to work on a wide range of exciting projects. As a Senior Analog Electronics Engineer, you will: Be recognised as an expert in the field of analog electronics Independently formulate technically innovative ideas and approaches Advise and coach less senior engineers, reviewing work for technical accuracy and adequacy Plan and execute work packages, either individually or as a work package owner Collaborate with cross-functional teams and oversee work with development partners To excel in this role, you should possess: Strong expertise in analog design, including low noise amplifiers, op-amp selection, loop stability, discrete transistor circuits, power amplifiers, and filter design Experience with switch mode power supplies, focusing on low noise/EMI, high efficiency, and low power Proficiency in measurement and testing using oscilloscopes, spectrum analysers, vector network analysers, and thermal cameras Knowledge of EMC, radio, and safety regulations (eg, EN 300220, EN61000, EN55011, EN55022) Extensive experience in product development and schematic capture & circuit simulation Additional advantageous skills include: Processor interfacing (USB, I2C, SPI, RS232/485) Digital Signal Processing and mathematical modelling Understanding of ADC/DAC types, usage, and design Experience with battery-powered devices and chargers PCB layout skills and the ability to lead technical teams Qualifications: BSc, BEng, or HND (or equivalent) in analog electronics engineering or a related field MSc, CEng, MIET (or equivalent) is preferred To apply, please submit your CV highlighting your relevant experience and accomplishments. Our client offers competitive compensation, comprehensive benefits, and opportunities for growth and development. Don't miss this exciting opportunity to make your mark in the world of analog electronics engineering Apply now!
Are you looking to join the EV revolution? At ANDERSEN-EV, we're on a mission to make Electric Vehicle (EV) charging as simple and smart as possible. By creating truly intuitive products that allow EV drivers to charge their vehicles at home and work, we are changing the game in the industry as it enters the mass market. Based in Stewartby (between Milton Keynes and Bedford), ANDERSEN-EV Plc operates a unique premier brand of residential and workplace charging points. Our Andersen-EV range of stylish charge points for electric vehicles are a blend of Scandinavian inspired design with cutting edge innovation. Our unique design features, such as a patented solution which hides the cable and plug from sight, have helped us win partnerships with vehicle manufacturers such as Jaguar-Land Rover and Porsche UK. All our intelligent EV charging points are IoT enabled, so customers can track things like their energy usage using our very own mobile applications. We're looking to grow our Product and Technology team by bringing on some of the best and brightest developers to help us expand our development capabilities. This will necessitate increasing our Technical Leadership. We are therefore seeking an experienced, qualified, and multi-skilled deputy to our Director of Engineering. Summary As the Deputy Head of Engineering, you will work alongside our engineering team, reporting to the Director of Engineering. You will hold a Degree in Electronics Engineering and will be multiskilled in the disciplines of Electronics Hardware Design, Firmware Development, Cloud Servers, Smartphone Applications and Website implementation. You will be involved in the day-to-day management of a team of cross skilled experts in these specialities and will also be expected to carry your own development workload. We are seeking someone who is a team player having first class management and technical skills. You will be outgoing, hardworking, and enthusiastic and will spread these attributes throughout the development team. You will be at the forefront of design and innovation, not only in our company but also within the Electric Vehicle Charging Industry as a whole. This is an office-based role as you will be expected to work very closely with the Director of Engineering, other senior management, and the development team. Alongside your supervision and development work, you'll be expected to uphold the detailed level of documentation and reporting that all our development team deliver in support of new features and releases. You Will Need A passion for technology Degree level education in the field of Electronics Engineering Fully experienced in designing circuits, schematic capture, PCB layout Board bring-up for both digital and analogue circuits You will be familiar and fully competent with Altium 365 and Altium Designer Knowledge of EMC design principles and best practices and designing to industry regulations Experienced with lab testing and measurement equipment such as power supplies, AC and DC loads, oscilloscopes, and near-field probes A thorough knowledge of C, Embedded C and C++ A knowledge of agile product development practices, project management tools, toolchains, and unit testing software Knowledge of standard tools such as compilers and debuggers, especially ARM based Experience with ST Microelectronics SM32 series of microcontrollers, Espressif and Atmega microcontrollers, particularly 32 bit Experience with developing Smartphone Applications and Websites An aptitude for problem solving To be fully computer literate Excellent verbal communication skills and a strong command of the English language At least 4 years' experience as a manager in an electronics development environment Ideally, you will: Have a keen interest in electric vehicles and the energy industry Excellent verbal communication skills and a strong command of the English language Have extensive industry experience as an Electronics Developer with significant management experience. Your Key Responsibilities To fully support the Director of Engineering in all activities To be involved in the day-to-day activities of the development team To have an active role in project planning To ensure that projects run to time To report any issues and deviations To carry your own development workload To carry out the duties of the Director of Engineering during absences and leave Support production operations, including end of line testing and problem investigations To act as an educator to other areas of the business, including sales, marketing, and customer services Advantageous Skills/Experience Experience of developing IoT / Smart Products both mains powered Experience of Open EVSE / RAPI / EV Charging technologies
Apr 22, 2024
Full time
Are you looking to join the EV revolution? At ANDERSEN-EV, we're on a mission to make Electric Vehicle (EV) charging as simple and smart as possible. By creating truly intuitive products that allow EV drivers to charge their vehicles at home and work, we are changing the game in the industry as it enters the mass market. Based in Stewartby (between Milton Keynes and Bedford), ANDERSEN-EV Plc operates a unique premier brand of residential and workplace charging points. Our Andersen-EV range of stylish charge points for electric vehicles are a blend of Scandinavian inspired design with cutting edge innovation. Our unique design features, such as a patented solution which hides the cable and plug from sight, have helped us win partnerships with vehicle manufacturers such as Jaguar-Land Rover and Porsche UK. All our intelligent EV charging points are IoT enabled, so customers can track things like their energy usage using our very own mobile applications. We're looking to grow our Product and Technology team by bringing on some of the best and brightest developers to help us expand our development capabilities. This will necessitate increasing our Technical Leadership. We are therefore seeking an experienced, qualified, and multi-skilled deputy to our Director of Engineering. Summary As the Deputy Head of Engineering, you will work alongside our engineering team, reporting to the Director of Engineering. You will hold a Degree in Electronics Engineering and will be multiskilled in the disciplines of Electronics Hardware Design, Firmware Development, Cloud Servers, Smartphone Applications and Website implementation. You will be involved in the day-to-day management of a team of cross skilled experts in these specialities and will also be expected to carry your own development workload. We are seeking someone who is a team player having first class management and technical skills. You will be outgoing, hardworking, and enthusiastic and will spread these attributes throughout the development team. You will be at the forefront of design and innovation, not only in our company but also within the Electric Vehicle Charging Industry as a whole. This is an office-based role as you will be expected to work very closely with the Director of Engineering, other senior management, and the development team. Alongside your supervision and development work, you'll be expected to uphold the detailed level of documentation and reporting that all our development team deliver in support of new features and releases. You Will Need A passion for technology Degree level education in the field of Electronics Engineering Fully experienced in designing circuits, schematic capture, PCB layout Board bring-up for both digital and analogue circuits You will be familiar and fully competent with Altium 365 and Altium Designer Knowledge of EMC design principles and best practices and designing to industry regulations Experienced with lab testing and measurement equipment such as power supplies, AC and DC loads, oscilloscopes, and near-field probes A thorough knowledge of C, Embedded C and C++ A knowledge of agile product development practices, project management tools, toolchains, and unit testing software Knowledge of standard tools such as compilers and debuggers, especially ARM based Experience with ST Microelectronics SM32 series of microcontrollers, Espressif and Atmega microcontrollers, particularly 32 bit Experience with developing Smartphone Applications and Websites An aptitude for problem solving To be fully computer literate Excellent verbal communication skills and a strong command of the English language At least 4 years' experience as a manager in an electronics development environment Ideally, you will: Have a keen interest in electric vehicles and the energy industry Excellent verbal communication skills and a strong command of the English language Have extensive industry experience as an Electronics Developer with significant management experience. Your Key Responsibilities To fully support the Director of Engineering in all activities To be involved in the day-to-day activities of the development team To have an active role in project planning To ensure that projects run to time To report any issues and deviations To carry your own development workload To carry out the duties of the Director of Engineering during absences and leave Support production operations, including end of line testing and problem investigations To act as an educator to other areas of the business, including sales, marketing, and customer services Advantageous Skills/Experience Experience of developing IoT / Smart Products both mains powered Experience of Open EVSE / RAPI / EV Charging technologies
Job Description EMC Elite Engineering Services Limited.Company Location: West Horndon, Essex, United Kingdom. EMC Elite Engineering Services Ltd. Permanent Position - We are currently seeking an experienced and qualified HSE Manager. Job role; based from our EMC Head Office in West Horndon, and visiting various key customer sites across the U.K. • Candidate must have a minimum of 5 years' experience within the heavy engineering sectors such as Power & Energy, Petro-Chemical and Aggregate. • Experienced Health and Safety professional with a proven track record in high hazard and heavily regulated environments. • Knowledge and expertise working with and continually improving recognised management systems such as ISO 45001, 14001 and 9001. Package: • £40,000 to £50,000 inclusive of travel depending on qualifications and experience . • Opportunity for overtime when supporting large projects and outages. • Annual bonus. • Company van + fuel card. • 25 days annual holidays + statutory/ bank holidays. • 40-hour week during normal office hours Monday - Friday. • Company uniform, PPE, laptop and phone will be provided • Statutory Pension Scheme. • Training and development opportunities. The successful applicant will have the following profile: • A full driving license, preferably clean. • Relevant Health and Safety Advisory experience working within the heavy engineering sectors. • NEBOSH Diploma in Occupational Safety & Health, or equivalent CSCS card holder. • A qualified internal health & safety auditor with demonstrable experience of completing internal audits. • Minimum Grad IOSH. • Ability to engage and communicate with all levels of employees, build rapport and good relationships and rapport with clients and possessing strong influencing and negotiating skills. • A pragmatic approach to the management of Health, Safety, Environment and Quality Assurance. • Experience and knowledge of management systems such as ISO 45001, 14001 and 9001. Ideal personality traits: • Able to influence with gravitas and gain buy in at all levels. • Positive and proactive approach to HSE. • Confident, self-motivated and ambitious. Responsibilities and Duties: • Supports the top management in the HSE Policy and Guidelines issue. • Supports the top management in the organization roles and responsibilities definition, for what concerns safety aspects. • Supports the top management in the HSE Management System standard issue. • Ensures, in accordance with the company guidelines, the implementation, updating, review and auditing of the company HSE Systems. • Monitors the effective implementation of appropriate safety and environment system procedures and provide for their updating in line with changes in legislation and company directives. • Provides for motivation and familiarization of all company personnel respecting the importance of complying with company system procedures and all Safety equipment provided. • Assists the Commercial, Engineering and Operations Department in their dealings with clients in all issues concerned with Health and Safety at work. • Conducts safety audits both internal and external. • Takes part and where required lead in accident / incident investigation. • Carries out analysis of accident / incident statistics, identifying trends and suggesting improvement plans. • Provides technical support to senior management on any safety related subjects. • Carries out any in-house safety training. • Carries out safety audits on Sub-contractors. • Liaises between clients on safety related issues. • Safeties related engineering input into new projects and modification programs. • Participates to HAZOP meetings prior to procurement and installation activities. • Performs risk assessment. • Supports outages and projects at customers sites, must be flexible to travel and work away. During outages the HSE Manager shall be required to manage EMC Health and Safety processes. • Preparation of Health and Safety documentation for new tenders. • Provides Safety support and advice, including supervision on preparation of plans and procedures for initial contract start up activities. EMC Elite Engineering Services has combined power and heavy engineering & process industry expertise. Our highly skilled operatives are able to support all your business needs. We provide support in project management and labour/resources and during high activity periods such as shut-downs or outages EMC can produce project plans detailing work scopes with quality documentation to include witness and hold points at critical stages, providing supervision along with site support. It begins with conception, then on to execution, and finally job completion. The types of projects we undertake can range from a single Engineering task, large or small, for example; a Pump Motor overhaul, right through to a complete Power Station outage event.
Apr 22, 2024
Full time
Job Description EMC Elite Engineering Services Limited.Company Location: West Horndon, Essex, United Kingdom. EMC Elite Engineering Services Ltd. Permanent Position - We are currently seeking an experienced and qualified HSE Manager. Job role; based from our EMC Head Office in West Horndon, and visiting various key customer sites across the U.K. • Candidate must have a minimum of 5 years' experience within the heavy engineering sectors such as Power & Energy, Petro-Chemical and Aggregate. • Experienced Health and Safety professional with a proven track record in high hazard and heavily regulated environments. • Knowledge and expertise working with and continually improving recognised management systems such as ISO 45001, 14001 and 9001. Package: • £40,000 to £50,000 inclusive of travel depending on qualifications and experience . • Opportunity for overtime when supporting large projects and outages. • Annual bonus. • Company van + fuel card. • 25 days annual holidays + statutory/ bank holidays. • 40-hour week during normal office hours Monday - Friday. • Company uniform, PPE, laptop and phone will be provided • Statutory Pension Scheme. • Training and development opportunities. The successful applicant will have the following profile: • A full driving license, preferably clean. • Relevant Health and Safety Advisory experience working within the heavy engineering sectors. • NEBOSH Diploma in Occupational Safety & Health, or equivalent CSCS card holder. • A qualified internal health & safety auditor with demonstrable experience of completing internal audits. • Minimum Grad IOSH. • Ability to engage and communicate with all levels of employees, build rapport and good relationships and rapport with clients and possessing strong influencing and negotiating skills. • A pragmatic approach to the management of Health, Safety, Environment and Quality Assurance. • Experience and knowledge of management systems such as ISO 45001, 14001 and 9001. Ideal personality traits: • Able to influence with gravitas and gain buy in at all levels. • Positive and proactive approach to HSE. • Confident, self-motivated and ambitious. Responsibilities and Duties: • Supports the top management in the HSE Policy and Guidelines issue. • Supports the top management in the organization roles and responsibilities definition, for what concerns safety aspects. • Supports the top management in the HSE Management System standard issue. • Ensures, in accordance with the company guidelines, the implementation, updating, review and auditing of the company HSE Systems. • Monitors the effective implementation of appropriate safety and environment system procedures and provide for their updating in line with changes in legislation and company directives. • Provides for motivation and familiarization of all company personnel respecting the importance of complying with company system procedures and all Safety equipment provided. • Assists the Commercial, Engineering and Operations Department in their dealings with clients in all issues concerned with Health and Safety at work. • Conducts safety audits both internal and external. • Takes part and where required lead in accident / incident investigation. • Carries out analysis of accident / incident statistics, identifying trends and suggesting improvement plans. • Provides technical support to senior management on any safety related subjects. • Carries out any in-house safety training. • Carries out safety audits on Sub-contractors. • Liaises between clients on safety related issues. • Safeties related engineering input into new projects and modification programs. • Participates to HAZOP meetings prior to procurement and installation activities. • Performs risk assessment. • Supports outages and projects at customers sites, must be flexible to travel and work away. During outages the HSE Manager shall be required to manage EMC Health and Safety processes. • Preparation of Health and Safety documentation for new tenders. • Provides Safety support and advice, including supervision on preparation of plans and procedures for initial contract start up activities. EMC Elite Engineering Services has combined power and heavy engineering & process industry expertise. Our highly skilled operatives are able to support all your business needs. We provide support in project management and labour/resources and during high activity periods such as shut-downs or outages EMC can produce project plans detailing work scopes with quality documentation to include witness and hold points at critical stages, providing supervision along with site support. It begins with conception, then on to execution, and finally job completion. The types of projects we undertake can range from a single Engineering task, large or small, for example; a Pump Motor overhaul, right through to a complete Power Station outage event.
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Apr 19, 2024
Full time
A Senior Electronic Design Engineer is now needed to join a company who are expanding their Electronics team. The company are owned by a very stable global business but operate as an SME and work on a variety of projects around intrinsically safe products. As their Senior Electronics Engineer you will be working throughout the full product life cycle and joining at time when they are at the start of projects to see them all the way through to manufacturing as they also manufacture all of their products. The great thing about this company is that they are involved in many different industries giving you excellent exposure to different projects and developing your skills. The company operate on a flexible working policy 3 days on site and 2 from home + Benefits. Core skills for this role include:- 5+ years in designing in both Analogue and Digital Design Schematic Capture PCB Design Microcontrollers PCB Design Layout Alitum or similar Desirable Power supply design High speed digital design Wireless modules/RF experience (eg Wifi, BLE/Bluetooth, RFID) EMC testing, failure analysis Do not worry if you don't have every skill listed the company are really interested in passionate Engineers so please do not hesitate to get in touch, as it would be great to hear from you. I appreciate that you may not have all of the skills listed but if you feel this may be suitable lets have a chat and go from there. Please send your CV to (see below). Alternatively if you know someone who would be ideal for this role help them out and point them in my direction as we do offer referral fees WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.
Job title: Power Supply Design Engineer Location: Stonehouse Technology Center, UK About Schlumberger: We are Schlumberger, the leading provider of technology and services to the energy industry. Throughout much of the oil and gas lifecycle in over 120 countries; we design, develop, and deliver technology and services that transforms how work is done. We define the boundaries of the industry by unleashing our talented people's energy. We're looking for innovators to join our diverse community of colleagues and develop new solutions and push the limits of what's possible. If you share our passion for discovery and want to find out what you could really do, then here is the place to do it. Job Summary: The Power Supply Design Engineer is responsible for assisting in providing innovative and cost-effective solutions requiring the development or sustaining of new or improved techniques, procedures or products related to power electronics (power conversion, motor control and motor drive). The Power Supply Design Engineer also assists in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion. Essential Responsibilities and Duties: Assist in identifying and organizing requirements for power electronics applications. Apply relevant usability procedures and principles. In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure. Analyze, design, develop and maintain products and assist in their commercialization. Product commercialization include but not limited to full system integration, full environmental qualification and successful field test. Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,....) Design magnetics with associated simulation. Magnetics needs to be outsourced using "built to print" manufacturing file methodology (to allow double sourcing) Design for test and for manufacturing with the support of the concurrent team Build prototypes, products and systems suitable for testing. Set up and run lab experiments. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects. Release test reports of all prototypes built using the standard Power CPE engineering test platform. Get familiar with SLB environmental qualification process and associated machines/equipment (aging test, ATV, hot shock,...) Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use. Create and maintain product documentation. Provide support to field and customers through InTouch. Provide user training as required. Assign, direct and review work of technicians and provide guidance to engineers. With seniority, mentor junior engineers. Develop project plan by continually evaluate engineering approaches/concepts with associated risks. Author technical reports, papers, articles, patents and presentations. Share expertise via Eureka and special interest groups. Expand informal network throughout the organization. Keep abreast of novel technical concepts and markets. Adopt new practices readily in order to develop innovative and low-cost products. Maintain familiarity with company technology, organization and business. Help develop a power module building block library for high temperature applications not only for D&M applications but also Wireline - Expansion in OneSea applications need also to be taken into account. Interact directly with internal customers to understand their needs and translate them into requirements using the Product Maturity Tracker Get familiar with SLB Root Cause Analysis methodology (5 WHY or fishbone) including FMEA process Qualification: Minimum BSc in Electrical Engineering 10+ years of power supply design experience Competencies: Strong lab experience in debugging complex power modules (hand-on experience) Familiar with multiple power supply topologies (flyback, half bridge, full bridge,...) Candidate needs to be customer oriented since the Power CPE is providing insourcing capability ("start-up") Strong in experience in design for cost, manufacturability, testability and reliability Experience in project management is a big plus (each power supply is managed as a minim project) Experience in firmware development is a big plus (digitalization migration) Schlumberger is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Jan 04, 2022
Full time
Job title: Power Supply Design Engineer Location: Stonehouse Technology Center, UK About Schlumberger: We are Schlumberger, the leading provider of technology and services to the energy industry. Throughout much of the oil and gas lifecycle in over 120 countries; we design, develop, and deliver technology and services that transforms how work is done. We define the boundaries of the industry by unleashing our talented people's energy. We're looking for innovators to join our diverse community of colleagues and develop new solutions and push the limits of what's possible. If you share our passion for discovery and want to find out what you could really do, then here is the place to do it. Job Summary: The Power Supply Design Engineer is responsible for assisting in providing innovative and cost-effective solutions requiring the development or sustaining of new or improved techniques, procedures or products related to power electronics (power conversion, motor control and motor drive). The Power Supply Design Engineer also assists in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion. Essential Responsibilities and Duties: Assist in identifying and organizing requirements for power electronics applications. Apply relevant usability procedures and principles. In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure. Analyze, design, develop and maintain products and assist in their commercialization. Product commercialization include but not limited to full system integration, full environmental qualification and successful field test. Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,....) Design magnetics with associated simulation. Magnetics needs to be outsourced using "built to print" manufacturing file methodology (to allow double sourcing) Design for test and for manufacturing with the support of the concurrent team Build prototypes, products and systems suitable for testing. Set up and run lab experiments. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects. Release test reports of all prototypes built using the standard Power CPE engineering test platform. Get familiar with SLB environmental qualification process and associated machines/equipment (aging test, ATV, hot shock,...) Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use. Create and maintain product documentation. Provide support to field and customers through InTouch. Provide user training as required. Assign, direct and review work of technicians and provide guidance to engineers. With seniority, mentor junior engineers. Develop project plan by continually evaluate engineering approaches/concepts with associated risks. Author technical reports, papers, articles, patents and presentations. Share expertise via Eureka and special interest groups. Expand informal network throughout the organization. Keep abreast of novel technical concepts and markets. Adopt new practices readily in order to develop innovative and low-cost products. Maintain familiarity with company technology, organization and business. Help develop a power module building block library for high temperature applications not only for D&M applications but also Wireline - Expansion in OneSea applications need also to be taken into account. Interact directly with internal customers to understand their needs and translate them into requirements using the Product Maturity Tracker Get familiar with SLB Root Cause Analysis methodology (5 WHY or fishbone) including FMEA process Qualification: Minimum BSc in Electrical Engineering 10+ years of power supply design experience Competencies: Strong lab experience in debugging complex power modules (hand-on experience) Familiar with multiple power supply topologies (flyback, half bridge, full bridge,...) Candidate needs to be customer oriented since the Power CPE is providing insourcing capability ("start-up") Strong in experience in design for cost, manufacturability, testability and reliability Experience in project management is a big plus (each power supply is managed as a minim project) Experience in firmware development is a big plus (digitalization migration) Schlumberger is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.