Redmore Recruitment limited
Penarth, South Glamorgan
Multi Skilled Engineer -Electrical Bias MAIN PURPOSE AND SCOPE OF THE JOB The Engineer is primarily responsible for delivering Preventative, Corrective and Reactive support to the operations team across all aspects of the site assets and infrastructure and to ensure the reliability and efficiency of the manufacturing assets. DUTIES & KEY RESPONSIBILITIES Preventative Maintenance: To complete the designated preventative maintenance tasks, identifying potential failures and through good engineering judgement creation of corrective tasks inclusive of parts needed and time for resolution. Corrective Maintenance: To plan and execute corrective maintenance tasks in line with a first time right approach. Reactive Maintenance: To be the first point of reference in the advent of an asset failure, to apply sound engineering knowledge for its resolution or where relevant escalate providing sufficient information to clearly communicate to the interested stakeholders the plan of action. Continuous Improvement: To identify potential Engineering / Operational solutions to reoccurring failures and to implement and complete resolutions as required. MEASURES & DELIVERABLES To adhere to the priorities set by the Engineering Manager. To use and regularly update the departmental reporting systems, including reporting faults as well as documenting preventative maintenance tasks. GENERAL RESPONSIBILITIES, SAFETY, HEALTH, ENVIRONMENTAL & QUALITY Handle engineering support requests for the operations area and for the factory infrastructure daily. Comply with the company's Health and Safety requirements, it is vital that all colleagues recognise and acknowledge they have responsibility for their own health and safety and that of others that may be affected by their acts or omissions. Demonstrate awareness and commitment to the quality and quality improvements in all aspects of the role. Keep work area clean and tidy, and hazard free. Compliance with company policies and procedures and management instructions. Must be flexible with regards to shift work. CRITERIA SKILLS AND ABILITIES Have proven fault finding experience in a busy manufacturing site. Have experience of working with PLC's, AC and DC Motors and drives. Have experience of working on Pneumatic and Hydraulic systems. Have experience of working with mechanical power transfer systems e.g., drive belts, transfer chains and bearing systems. The ability to interpret and amend technical mechanical and electrical drawings. Strong decision-making skills. Good IT Skills (Word, Excel and Outlook) KNOWLEDGE A minimum of an NVQ Level 3 or equivalent in an Engineering Related subject, ideally Mechatronics. PERSONAL ATTRIBUTES AND OTHER REQUIREMENTS Cover for other members of the engineering team during their absence as required. Job Types: Full-time, Permanent Schedule: 8 hour fixed afternoon shift 2pm-10pm Monday to Friday Job Types: Full-time, Permanent Pay: £40,000.00 per year Benefits: Company pension On-site parking Schedule: 8 hour shift Monday to Friday Work Location: In person Reference ID: EM1
Apr 18, 2024
Full time
Multi Skilled Engineer -Electrical Bias MAIN PURPOSE AND SCOPE OF THE JOB The Engineer is primarily responsible for delivering Preventative, Corrective and Reactive support to the operations team across all aspects of the site assets and infrastructure and to ensure the reliability and efficiency of the manufacturing assets. DUTIES & KEY RESPONSIBILITIES Preventative Maintenance: To complete the designated preventative maintenance tasks, identifying potential failures and through good engineering judgement creation of corrective tasks inclusive of parts needed and time for resolution. Corrective Maintenance: To plan and execute corrective maintenance tasks in line with a first time right approach. Reactive Maintenance: To be the first point of reference in the advent of an asset failure, to apply sound engineering knowledge for its resolution or where relevant escalate providing sufficient information to clearly communicate to the interested stakeholders the plan of action. Continuous Improvement: To identify potential Engineering / Operational solutions to reoccurring failures and to implement and complete resolutions as required. MEASURES & DELIVERABLES To adhere to the priorities set by the Engineering Manager. To use and regularly update the departmental reporting systems, including reporting faults as well as documenting preventative maintenance tasks. GENERAL RESPONSIBILITIES, SAFETY, HEALTH, ENVIRONMENTAL & QUALITY Handle engineering support requests for the operations area and for the factory infrastructure daily. Comply with the company's Health and Safety requirements, it is vital that all colleagues recognise and acknowledge they have responsibility for their own health and safety and that of others that may be affected by their acts or omissions. Demonstrate awareness and commitment to the quality and quality improvements in all aspects of the role. Keep work area clean and tidy, and hazard free. Compliance with company policies and procedures and management instructions. Must be flexible with regards to shift work. CRITERIA SKILLS AND ABILITIES Have proven fault finding experience in a busy manufacturing site. Have experience of working with PLC's, AC and DC Motors and drives. Have experience of working on Pneumatic and Hydraulic systems. Have experience of working with mechanical power transfer systems e.g., drive belts, transfer chains and bearing systems. The ability to interpret and amend technical mechanical and electrical drawings. Strong decision-making skills. Good IT Skills (Word, Excel and Outlook) KNOWLEDGE A minimum of an NVQ Level 3 or equivalent in an Engineering Related subject, ideally Mechatronics. PERSONAL ATTRIBUTES AND OTHER REQUIREMENTS Cover for other members of the engineering team during their absence as required. Job Types: Full-time, Permanent Schedule: 8 hour fixed afternoon shift 2pm-10pm Monday to Friday Job Types: Full-time, Permanent Pay: £40,000.00 per year Benefits: Company pension On-site parking Schedule: 8 hour shift Monday to Friday Work Location: In person Reference ID: EM1
Electronic Technician (Offshore & Onshore) About SLB We are SLB, the leading provider of technology and services to the energy industry. Active in 120 countries globally, we design, develop, and deliver revolutionary technology and services in the energy sector that transforms how work is done. At SLB we create top-notch technology that unlocks access to energy for the benefit of all. That is our purpose. And as innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. We define the boundaries of the industry by unleashing our talented people's energy. We're looking for innovators to join our diverse community of colleagues and develop new solutions and push the limits of what's possible. If you share our passion for discovery and want to find out what you could really do, then here is the place to do it. Are you an Electronic Technician, looking for a new role with unparalleled progression opportunities • Do you have previous experience working in a field role, either on- or offshore • We have an exciting opportunity for an individual to join us and work on a diverse range of electrical, electronic, and computer-based equipment on cementing pumps and blending units. You'll work alongside mechanical technicians to conduct planned maintenance, as well as completing repairs both on and offshore. While previous experience working on cementing equipment is desirable, we are open to applications from a diverse range of backgrounds, comprehensive training is provided. This role could also be highly suited to those with experience in: Servicing/Maintenance of Automation and Controls Systems Aircraft Maintenance and Avionics Servicing and maintenance of industrial machinery What's on offer Future Career Progression: Embrace growth opportunities, where we prioritise employee development and advancement. Industry-Leading Equipment: Work with cutting-edge technology at the forefront of the industry, contributing to ground-breaking advancements. Market-leading package, including health insurance, pension and offshore bonus Role Scope Repair and maintain electric, electronic, and computer-based equipment according to company quality and safety standards Troubleshoot and test electrical and electronic issues on equipment in the workshop, and conduct offshore field repairs Assist mechanical technicians to carry out scheduled maintenance and repair electrical and electronic issues both on and offshore Assist in training and supporting personnel to troubleshoot electrical/electronic systems About you: HND or HNC in Electrical/Electronic engineering, or an equivalent field Previous experience in an electronic/electrical maintenance role COMPEX would be desirable Experience with hydraulic equipment or diesel engines would also be desirable SLB is an equal opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law.
Apr 18, 2024
Full time
Electronic Technician (Offshore & Onshore) About SLB We are SLB, the leading provider of technology and services to the energy industry. Active in 120 countries globally, we design, develop, and deliver revolutionary technology and services in the energy sector that transforms how work is done. At SLB we create top-notch technology that unlocks access to energy for the benefit of all. That is our purpose. And as innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. We define the boundaries of the industry by unleashing our talented people's energy. We're looking for innovators to join our diverse community of colleagues and develop new solutions and push the limits of what's possible. If you share our passion for discovery and want to find out what you could really do, then here is the place to do it. Are you an Electronic Technician, looking for a new role with unparalleled progression opportunities • Do you have previous experience working in a field role, either on- or offshore • We have an exciting opportunity for an individual to join us and work on a diverse range of electrical, electronic, and computer-based equipment on cementing pumps and blending units. You'll work alongside mechanical technicians to conduct planned maintenance, as well as completing repairs both on and offshore. While previous experience working on cementing equipment is desirable, we are open to applications from a diverse range of backgrounds, comprehensive training is provided. This role could also be highly suited to those with experience in: Servicing/Maintenance of Automation and Controls Systems Aircraft Maintenance and Avionics Servicing and maintenance of industrial machinery What's on offer Future Career Progression: Embrace growth opportunities, where we prioritise employee development and advancement. Industry-Leading Equipment: Work with cutting-edge technology at the forefront of the industry, contributing to ground-breaking advancements. Market-leading package, including health insurance, pension and offshore bonus Role Scope Repair and maintain electric, electronic, and computer-based equipment according to company quality and safety standards Troubleshoot and test electrical and electronic issues on equipment in the workshop, and conduct offshore field repairs Assist mechanical technicians to carry out scheduled maintenance and repair electrical and electronic issues both on and offshore Assist in training and supporting personnel to troubleshoot electrical/electronic systems About you: HND or HNC in Electrical/Electronic engineering, or an equivalent field Previous experience in an electronic/electrical maintenance role COMPEX would be desirable Experience with hydraulic equipment or diesel engines would also be desirable SLB is an equal opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law.
Job Title: PSV Technician / Bus Mechanic / HGV Fitter Pay: 48,000 - 55,000 Per Annum (Enhanced Overtime Rates) Type: Permanent Location: Hull, United Kingdom Are you a skilled and experienced PSV Technician / Bus Mechanic / HGV Fitter with a passion for keeping the wheels of public transportation turning? If so, we want to hear from you! We are currently seeking a dedicated Bus Mechanic to join our client and play a crucial role in maintaining the reliability and safety of their national fleet of buses. PSV Technician / Bus Mechanic / HGV Fitter Key Responsibilities: Conduct routine maintenance and inspections on buses to ensure they meet safety and performance standards. Diagnose and repair mechanical, electrical, and hydraulic issues. Perform scheduled servicing and preventive maintenance tasks. Collaborate with the maintenance team to address any arising issues promptly. Keep accurate records of maintenance activities and report any major faults or defects. PSV Technician / Bus Mechanic / HGV Fitter Qualifications and Skills: Proven experience as a mechanic, preferably with a focus on buses or heavy-duty vehicles. Relevant technical qualifications (NVQ, City & Guilds, or equivalent). Strong diagnostic and problem-solving skills. Ability to work independently and as part of a team. Good communication skills and the ability to explain technical issues to non-technical staff. PSV Technician / Bus Mechanic / HGV Fitter Benefits: Competitive salary Opportunities for ongoing training and professional development. Pension scheme. Employee assistance program. A positive and inclusive working environment. How to Apply for PSV Technician / Bus Mechanic / HGV Fitter Role : If you are ready to take on a rewarding role as a PSV Technician / Bus Mechanic / HGV Fitter , please apply now, submit your CV to (url removed) or call me on (phone number removed)
Apr 18, 2024
Full time
Job Title: PSV Technician / Bus Mechanic / HGV Fitter Pay: 48,000 - 55,000 Per Annum (Enhanced Overtime Rates) Type: Permanent Location: Hull, United Kingdom Are you a skilled and experienced PSV Technician / Bus Mechanic / HGV Fitter with a passion for keeping the wheels of public transportation turning? If so, we want to hear from you! We are currently seeking a dedicated Bus Mechanic to join our client and play a crucial role in maintaining the reliability and safety of their national fleet of buses. PSV Technician / Bus Mechanic / HGV Fitter Key Responsibilities: Conduct routine maintenance and inspections on buses to ensure they meet safety and performance standards. Diagnose and repair mechanical, electrical, and hydraulic issues. Perform scheduled servicing and preventive maintenance tasks. Collaborate with the maintenance team to address any arising issues promptly. Keep accurate records of maintenance activities and report any major faults or defects. PSV Technician / Bus Mechanic / HGV Fitter Qualifications and Skills: Proven experience as a mechanic, preferably with a focus on buses or heavy-duty vehicles. Relevant technical qualifications (NVQ, City & Guilds, or equivalent). Strong diagnostic and problem-solving skills. Ability to work independently and as part of a team. Good communication skills and the ability to explain technical issues to non-technical staff. PSV Technician / Bus Mechanic / HGV Fitter Benefits: Competitive salary Opportunities for ongoing training and professional development. Pension scheme. Employee assistance program. A positive and inclusive working environment. How to Apply for PSV Technician / Bus Mechanic / HGV Fitter Role : If you are ready to take on a rewarding role as a PSV Technician / Bus Mechanic / HGV Fitter , please apply now, submit your CV to (url removed) or call me on (phone number removed)
- Senior Process Engineer - OLGA Permanent Salary: Circa £60,000 and flex fund of £1175 Remote with travel to Aberdeen Applicants must have the right to work in the UK We are currently looking for Process Engineers (ideally with OLGA Software knowledge) looking for the next step to Senior to be based in Aberdeen, Hybrid. Main Purpose of Role: To undertake the delivery of proposal and engineering activities from feasibility through to detailed design, including the generation of process deliverables, as assigned by the lead engineer or project engineering manager in accordance with Penspen's quality and engineering practice and procedures. In addition to requirement to support all of Penspen's current process engineering activities, in both facilities and pipelines, will be expected and encouraged to develop capability or expertise in specialist process areas, such as HYSYS simulation or flow assurance. Responsibilities: • Actively plans and manages own work load and the work load of individuals under their supervision to ensure all deliverables and associated work activities are issued in accordance with the project schedule and are compliant with Penspen QA procedures. • In addition to general process engineering deliverables is responsible for development of key basis of design and design philosophies. • Must ensure all project work is compliant with applicable client requirements and specifications, international codes and standards, and internal company standards. • Review and checking of process deliverables (with emphasis on checking). Approval of process engineering deliverables may be required in specific circumstances subject to granting of formal approvals authority by the CDE. • Supports the lead engineer in estimation, planning, management and delivery of process deliverables as per the process scope of work and assigned project role. May be required to lead all or part of project process scope of work. • Assumes responsibility for supervising and ensuring high quality work output from less experienced process engineers, including coordination of workload, and provides training of these individuals where required. • Takes initiative to identify, develop and follow-up recommendations to enhance own performance and wider process engineering practices, methods and tools. • Attends other Penspen office, client facilities or other locations as required to assist in proposal and project execution. • Participate in and take a lead role where required in key project safety and design reviews, including P&ID design reviews, HAZID, HAZOP and SIL studies, and model reviews. • Provide expertise as practitioner in application of specialist process software applications eg HYSYS and flow assurance software. Qualifications/Knowledge / Experience (Skills): • An engineering degree (or equivalent) in Chemical and/or Process Engineering • Chartered Engineer (Member or Fellow of Professional Institute) • Must possess an excellent technical background in the design of onshore/offshore oil & gas • process facilities, pipelines and associated pipeline facilities and be able to demonstrate • excellent general process engineering knowledge of and experience in development of typical process engineering deliverables such as PFDs, P&IDs, equipment, line and control valve sizing calcs, datasheets and functional specifications. • Must have significant experience in delivery of feasibility, concept selection and Pre-FEED • studies and in execution of FEED and detailed engineering activities. • Must be able to demonstrate good working knowledge of specialist process software, in • particular HYSYS & Promax for process simulation. Ideally must also be conversant with other commonly used software tools such as Flare System Analyser for flare network design; ERD for heat exchanger thermal rating; Flaresim/FRED for flare radiation and dispersion modeling; and Pipenet for hydraulic network and fire water deluge system design. • Must have a rigorous knowledge of relief and blow-down study work including PSV and • blowdown sizing calcs and the HAZOP study process • Must be able to communicate effectively with strong written and verbal communication skills, in particular with respect to technical report writing and the delivery of presentations. • Should be able to demonstrate comprehensive knowledge and experience of the national and international standards and codes of practice as commonly applied to the design of • onshore/offshore oil & gas process facilities, pipelines and associated pipeline facilities. • Must have working knowledge of or specialist capability in application of flow assurance tools including OLGA, TGNet, Pipesim etc • Must have good knowledge of workflow required to generate and develop process • deliverables, including key interdependencies with, and inputs from, other disciplines • Will be expected to actively expand knowledge and capabilities to support development of • Penspen's process offering and capability in new areas such as LNG. • Is committed to personal and professional development, and is pro-active in remaining up to date with job related technical requirements and actively seeking to improve subject matter knowledge and expertise Benefits: • Company pension • Flexitime • Work from home Schedule: • Monday to Friday Supplemental pay types: • Bonus scheme • Performance bonus Experience: • Process Engineer: 10 years (required) Licence/Certification: • Driving Licence (required)
Apr 18, 2024
Full time
- Senior Process Engineer - OLGA Permanent Salary: Circa £60,000 and flex fund of £1175 Remote with travel to Aberdeen Applicants must have the right to work in the UK We are currently looking for Process Engineers (ideally with OLGA Software knowledge) looking for the next step to Senior to be based in Aberdeen, Hybrid. Main Purpose of Role: To undertake the delivery of proposal and engineering activities from feasibility through to detailed design, including the generation of process deliverables, as assigned by the lead engineer or project engineering manager in accordance with Penspen's quality and engineering practice and procedures. In addition to requirement to support all of Penspen's current process engineering activities, in both facilities and pipelines, will be expected and encouraged to develop capability or expertise in specialist process areas, such as HYSYS simulation or flow assurance. Responsibilities: • Actively plans and manages own work load and the work load of individuals under their supervision to ensure all deliverables and associated work activities are issued in accordance with the project schedule and are compliant with Penspen QA procedures. • In addition to general process engineering deliverables is responsible for development of key basis of design and design philosophies. • Must ensure all project work is compliant with applicable client requirements and specifications, international codes and standards, and internal company standards. • Review and checking of process deliverables (with emphasis on checking). Approval of process engineering deliverables may be required in specific circumstances subject to granting of formal approvals authority by the CDE. • Supports the lead engineer in estimation, planning, management and delivery of process deliverables as per the process scope of work and assigned project role. May be required to lead all or part of project process scope of work. • Assumes responsibility for supervising and ensuring high quality work output from less experienced process engineers, including coordination of workload, and provides training of these individuals where required. • Takes initiative to identify, develop and follow-up recommendations to enhance own performance and wider process engineering practices, methods and tools. • Attends other Penspen office, client facilities or other locations as required to assist in proposal and project execution. • Participate in and take a lead role where required in key project safety and design reviews, including P&ID design reviews, HAZID, HAZOP and SIL studies, and model reviews. • Provide expertise as practitioner in application of specialist process software applications eg HYSYS and flow assurance software. Qualifications/Knowledge / Experience (Skills): • An engineering degree (or equivalent) in Chemical and/or Process Engineering • Chartered Engineer (Member or Fellow of Professional Institute) • Must possess an excellent technical background in the design of onshore/offshore oil & gas • process facilities, pipelines and associated pipeline facilities and be able to demonstrate • excellent general process engineering knowledge of and experience in development of typical process engineering deliverables such as PFDs, P&IDs, equipment, line and control valve sizing calcs, datasheets and functional specifications. • Must have significant experience in delivery of feasibility, concept selection and Pre-FEED • studies and in execution of FEED and detailed engineering activities. • Must be able to demonstrate good working knowledge of specialist process software, in • particular HYSYS & Promax for process simulation. Ideally must also be conversant with other commonly used software tools such as Flare System Analyser for flare network design; ERD for heat exchanger thermal rating; Flaresim/FRED for flare radiation and dispersion modeling; and Pipenet for hydraulic network and fire water deluge system design. • Must have a rigorous knowledge of relief and blow-down study work including PSV and • blowdown sizing calcs and the HAZOP study process • Must be able to communicate effectively with strong written and verbal communication skills, in particular with respect to technical report writing and the delivery of presentations. • Should be able to demonstrate comprehensive knowledge and experience of the national and international standards and codes of practice as commonly applied to the design of • onshore/offshore oil & gas process facilities, pipelines and associated pipeline facilities. • Must have working knowledge of or specialist capability in application of flow assurance tools including OLGA, TGNet, Pipesim etc • Must have good knowledge of workflow required to generate and develop process • deliverables, including key interdependencies with, and inputs from, other disciplines • Will be expected to actively expand knowledge and capabilities to support development of • Penspen's process offering and capability in new areas such as LNG. • Is committed to personal and professional development, and is pro-active in remaining up to date with job related technical requirements and actively seeking to improve subject matter knowledge and expertise Benefits: • Company pension • Flexitime • Work from home Schedule: • Monday to Friday Supplemental pay types: • Bonus scheme • Performance bonus Experience: • Process Engineer: 10 years (required) Licence/Certification: • Driving Licence (required)
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Apr 18, 2024
Full time
About Us We are the International Division of our client, quoted on the LSE. Our client provides innovative and high-quality engineered components for the fenestration industry. The Division operates in Europe, Africa, Asia, Australia and Latin America. It is headquartered in Bologna and besides in Italy, it has manufacturing operations in the UK, China and Australia, along with sales and distribution units with light assembly facilities in Argentina, France, Greece, India, Spain, Turkey, Brasil, Germany and the United Arab Emirates. Our client's products are sold into residential and commercial applications all over the world under the Schlegel brand for sealing solutions to aluminium, PVCu and timber applications, the Giesse brand for hardware systems in aluminium doors and windows and the Reguitti brand for doors and windows handles. What You'll Do For our plant located in Henlow, we are looking for a Maintenance Engineer to join our team. Your main tasks & responsibilities Maintain and service all production machinery, using a multi-skilled approach, in accordance with manufacturers OEM'S Provide frontline engineering support Assist the Engineering Supervisor in minimising machine down time by proposing and introducing improved maintenance programmes and continuous improvement ideas Execute DPM/PPM systems Carry out property/facility maintenance duties as required Carry out routine statutory checks as required Complete a breakdown/fault log on a daily basis Liaise with the cell leaders on a daily basis providing engineering support Liaise with contracted service providers when on site, sign on/off in line with the companies site visitor/"permit to work" procedures Ensure TDI Monitoring system is operating correctly at all times Monitor engineering stock usage, order spares as required to provide continuous production support Participate in continuous improvement programmes Complete additional skills training as required by the company To provide out of hours "call-out" service Carry out such other duties as the management team may reasonably require To adhere to all Health, Safety and Environmental procedures To report any unsafe acts or Health, Safety and Environmental incidents Key Contacts Engineering Manager Engineering Supervisor Plant Manager Production Manager Shift Supervisors Key Outputs Contribute to smooth operation of production plant and site facilities. Key Skills Ideally Electrically Biased Multi Skilled Apprenticeship and NVQ level 3 Electrical 18th Edition qualification desirable Technically competent Knowledge of electrical/mechanical DPM/PPM procedures an advantage Knowledge of hydraulic and pneumatic systems an advantage Conversant with electrical/PLC control systems desirable Conversant with H&S rules, regulations and best practices (LOTO) Ability to prioritise workload and concisely record information Basic IT Knowledge Be able to work independently and part of a team "Hands on" and "can do" approach Additional Information Competitive Salary Immediate start
Job Role: Field Service Engineer Location: Leatherhead, Surrey (accepting applications from surrounding areas) Salary: £33,000-£35,000 base salary (OTE £48,000+)Hours: Monday-Friday 08.00-16.00 + Door to Door Paid + Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation based in the Surrey area to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The package: 33 days holiday including bank holidays Full & Comprehensive Training Scheme surrounding electrical and mechanical fault finding+ repair on specific Industrial cleaning products Wider group company pension scheme Paycare health plan (inclusive of dentists, Opticians, Health screening etc - private) Internal and external training + development both on products and the electrical mechanical certificates A 4 day structured induction/welcoming process to support you joining the team.Laptop, Company Vehicle, Fuel CardOvertime available at 1.5X Birthdays are all yours! Extra day annual leave for you birthday or closest working day. Annual Bonus - £1000 All Travel Time, Expenses paid from home to/from site. A fantastic Earning Potential with scope to progress The Duties: To attend breakdowns, service and installations on an array of industrial cleaning equipment, operating in a 30 mile radius of your area. The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) To carry out electrical, electronic, mechanical fault finding and repairs on industrial cleaning equipment, IG Engines (Petrol, Diesel, LPG). To manage your time effectively to ensure work is carried out to a high standard in a timely manner. Update job reports and order parts when necessary. Ensure Health & Safety Procedures are followed The Requirements: Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous. A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. Relevant qualifications NVQ or City and Guilds in mechanical/electrical engineering- not essential but would be an advantage. Experience using electrical & mechanical tools. Previous experience as a mechanical, electrical or field based engineer. Any experience surrounding Industrial Batteries, IC Engines or Industrial floor cleaning would be advantageous. Full UK Drivers LicenseInteraction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Connor on , or email Thank you for taking the time, we hope to speak in the near future&E
Apr 18, 2024
Full time
Job Role: Field Service Engineer Location: Leatherhead, Surrey (accepting applications from surrounding areas) Salary: £33,000-£35,000 base salary (OTE £48,000+)Hours: Monday-Friday 08.00-16.00 + Door to Door Paid + Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation based in the Surrey area to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The package: 33 days holiday including bank holidays Full & Comprehensive Training Scheme surrounding electrical and mechanical fault finding+ repair on specific Industrial cleaning products Wider group company pension scheme Paycare health plan (inclusive of dentists, Opticians, Health screening etc - private) Internal and external training + development both on products and the electrical mechanical certificates A 4 day structured induction/welcoming process to support you joining the team.Laptop, Company Vehicle, Fuel CardOvertime available at 1.5X Birthdays are all yours! Extra day annual leave for you birthday or closest working day. Annual Bonus - £1000 All Travel Time, Expenses paid from home to/from site. A fantastic Earning Potential with scope to progress The Duties: To attend breakdowns, service and installations on an array of industrial cleaning equipment, operating in a 30 mile radius of your area. The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) To carry out electrical, electronic, mechanical fault finding and repairs on industrial cleaning equipment, IG Engines (Petrol, Diesel, LPG). To manage your time effectively to ensure work is carried out to a high standard in a timely manner. Update job reports and order parts when necessary. Ensure Health & Safety Procedures are followed The Requirements: Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous. A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. Relevant qualifications NVQ or City and Guilds in mechanical/electrical engineering- not essential but would be an advantage. Experience using electrical & mechanical tools. Previous experience as a mechanical, electrical or field based engineer. Any experience surrounding Industrial Batteries, IC Engines or Industrial floor cleaning would be advantageous. Full UK Drivers LicenseInteraction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Connor on , or email Thank you for taking the time, we hope to speak in the near future&E
Hydrasun is a recognised market leader in the provision of integrated fluid transfer, power and control solutions. We are focused on supporting the energy transition through our work in the oil and gas, renewable energy, general industrial and marine industries worldwide. We are recruiting for an experienced Process Engineers to develop and execute Hydrogen and Clean Energy projects with a focus on design, build, installation and commissioning of mechanical, instrumentation and electrical packages. Hydrogen engineering capability is an integral strategic initiative within the Hydrasun business and this role will focus primarily on the management of Hydrogen projects from project development through concept selection, engineering, tendering, construction and commissioning. In parallel to Hydrogen this role will also oversee the engineering management of Hydraulic and Instrumentation engineered projects already carried out within the Hydrasun portfolio. Essential Experience, Qualifications and Competencies Degree qualified BSc or BEng in Engineering (or equivalent) Experienced Process & Systems Engineer (at a Senior/lead/principal level - NOTE this is Essential) Experienced in an engineering environment with design experience in a relevant area Experience in the following areas:- H2 technology, product engineering, capital project engineering, project development engineering and Cl capabilities Expereinced in the use of Microsoft Office Excellent HSE & QA awareness Excellent written and verbal communication skills Ability to maintain a professional and focused approach at all times, in particular, in customer facing situations Keen and effective attention to detail. Desirable Experience, Qualifications and Competencies Chartered Engineer or working towards or Chartered Status Experience in Project management would be advantageous Business development experience Design of control panels Design of small-bore tubing systems Product and process development Fabrication/welding design/codes and standards Active participation in engineering reviews and/or investigations with customer Knowledge of UK & EU regulatory frameworks, type approval, written schemes of examination and/or certification, considering Machinery Directive, ADR, TPED,PED,PSSR,PERl ATEX, DSEAR & EPS and COMAH Experience of Risk based design and functional safety methodologies including: FMEA, HAZID, HAZOP, HAZAN, LOPA Mathcad and FEA programmes experience . Responsibilities include but are not limited to: Development of strategic engineering concepts and solutions in relation to the Hydrogen and Clean Energy market. Implementation of product development programs, technical and economic evaluations, cost and schedule improvements, work process improvements and bid/project team support through engineered solutions to meet customer/market requirements. Work with the entire engineering team to deliver concept and design projects that provide safe, economic, engineered solutions to our customers, in compliance with all relevant codes and/or standards. Development of bespoke engineered solutions to meet customer requirements in line with or exceeding their needs. Develop and implement company engineering operational goals for product and service development within defined business objectives. Provide engineering support, advice and assistance to all divisions within the company. Communicate and coordinate with all company stakeholders (customer, inhouse manufacture, sales etc) to ensure their needs and expectations are met. Ensure the management and implementation of the required engineering standards across the business. Please note: Applicants must have a strong combination of commercial acumen and product engineering innovation to drive the correct balance between product development, cost reduction and performance. We kindly request no Agency support for this role.
Apr 18, 2024
Full time
Hydrasun is a recognised market leader in the provision of integrated fluid transfer, power and control solutions. We are focused on supporting the energy transition through our work in the oil and gas, renewable energy, general industrial and marine industries worldwide. We are recruiting for an experienced Process Engineers to develop and execute Hydrogen and Clean Energy projects with a focus on design, build, installation and commissioning of mechanical, instrumentation and electrical packages. Hydrogen engineering capability is an integral strategic initiative within the Hydrasun business and this role will focus primarily on the management of Hydrogen projects from project development through concept selection, engineering, tendering, construction and commissioning. In parallel to Hydrogen this role will also oversee the engineering management of Hydraulic and Instrumentation engineered projects already carried out within the Hydrasun portfolio. Essential Experience, Qualifications and Competencies Degree qualified BSc or BEng in Engineering (or equivalent) Experienced Process & Systems Engineer (at a Senior/lead/principal level - NOTE this is Essential) Experienced in an engineering environment with design experience in a relevant area Experience in the following areas:- H2 technology, product engineering, capital project engineering, project development engineering and Cl capabilities Expereinced in the use of Microsoft Office Excellent HSE & QA awareness Excellent written and verbal communication skills Ability to maintain a professional and focused approach at all times, in particular, in customer facing situations Keen and effective attention to detail. Desirable Experience, Qualifications and Competencies Chartered Engineer or working towards or Chartered Status Experience in Project management would be advantageous Business development experience Design of control panels Design of small-bore tubing systems Product and process development Fabrication/welding design/codes and standards Active participation in engineering reviews and/or investigations with customer Knowledge of UK & EU regulatory frameworks, type approval, written schemes of examination and/or certification, considering Machinery Directive, ADR, TPED,PED,PSSR,PERl ATEX, DSEAR & EPS and COMAH Experience of Risk based design and functional safety methodologies including: FMEA, HAZID, HAZOP, HAZAN, LOPA Mathcad and FEA programmes experience . Responsibilities include but are not limited to: Development of strategic engineering concepts and solutions in relation to the Hydrogen and Clean Energy market. Implementation of product development programs, technical and economic evaluations, cost and schedule improvements, work process improvements and bid/project team support through engineered solutions to meet customer/market requirements. Work with the entire engineering team to deliver concept and design projects that provide safe, economic, engineered solutions to our customers, in compliance with all relevant codes and/or standards. Development of bespoke engineered solutions to meet customer requirements in line with or exceeding their needs. Develop and implement company engineering operational goals for product and service development within defined business objectives. Provide engineering support, advice and assistance to all divisions within the company. Communicate and coordinate with all company stakeholders (customer, inhouse manufacture, sales etc) to ensure their needs and expectations are met. Ensure the management and implementation of the required engineering standards across the business. Please note: Applicants must have a strong combination of commercial acumen and product engineering innovation to drive the correct balance between product development, cost reduction and performance. We kindly request no Agency support for this role.
Job Role: Field Service Engineer Location: Gravesend, Kent (accepting applications from surrounding areas) Salary: £33,000-£35,000 base salary (OTE £48,000+) Hours: Monday-Friday 08.00-16.00 + Door to Door Paid + Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation based in the Kent areas to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The package: 33 days holiday including bank holidays Full & Comprehensive Training Scheme surrounding electrical and mechanical fault finding+ repair on specific Industrial cleaning products Wider group company pension scheme Paycare health plan (inclusive of dentists, Opticians, Health screening etc - private) Internal and external training + development both on products and the electrical mechanical certificates A 4 day structured induction/welcoming process to support you joining the team. Laptop, Company Vehicle, Fuel Card Overtime available at 1.5X Birthdays are all yours! Extra day annual leave for you birthday or closest working day. Annual Bonus - £1000 All Travel Time, Expenses paid from home to/from site. A fantastic Earning Potential with scope to progress The Duties: To attend breakdowns, service and installations on an array of industrial cleaning equipment, operating in a 30 mile radius of your area. The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) To carry out electrical, electronic, mechanical fault finding and repairs on industrial cleaning equipment, IG Engines (Petrol, Diesel, LPG). To manage your time effectively to ensure work is carried out to a high standard in a timely manner. Update job reports and order parts when necessary. Ensure Health & Safety Procedures are followed The Requirements: Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous. A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. Relevant qualifications NVQ or City and Guilds in mechanical/electrical engineering- not essential but would be an advantage. Experience using electrical & mechanical tools. Previous experience as a mechanical, electrical or field based engineer. Any experience surrounding Industrial Batteries, IC Engines or Industrial floor cleaning would be advantageous. Full UK Drivers License Interaction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Sam on , Thank you for taking the time, we hope to speak in the near future
Apr 18, 2024
Full time
Job Role: Field Service Engineer Location: Gravesend, Kent (accepting applications from surrounding areas) Salary: £33,000-£35,000 base salary (OTE £48,000+) Hours: Monday-Friday 08.00-16.00 + Door to Door Paid + Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation based in the Kent areas to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The package: 33 days holiday including bank holidays Full & Comprehensive Training Scheme surrounding electrical and mechanical fault finding+ repair on specific Industrial cleaning products Wider group company pension scheme Paycare health plan (inclusive of dentists, Opticians, Health screening etc - private) Internal and external training + development both on products and the electrical mechanical certificates A 4 day structured induction/welcoming process to support you joining the team. Laptop, Company Vehicle, Fuel Card Overtime available at 1.5X Birthdays are all yours! Extra day annual leave for you birthday or closest working day. Annual Bonus - £1000 All Travel Time, Expenses paid from home to/from site. A fantastic Earning Potential with scope to progress The Duties: To attend breakdowns, service and installations on an array of industrial cleaning equipment, operating in a 30 mile radius of your area. The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) To carry out electrical, electronic, mechanical fault finding and repairs on industrial cleaning equipment, IG Engines (Petrol, Diesel, LPG). To manage your time effectively to ensure work is carried out to a high standard in a timely manner. Update job reports and order parts when necessary. Ensure Health & Safety Procedures are followed The Requirements: Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous. A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter. Relevant qualifications NVQ or City and Guilds in mechanical/electrical engineering- not essential but would be an advantage. Experience using electrical & mechanical tools. Previous experience as a mechanical, electrical or field based engineer. Any experience surrounding Industrial Batteries, IC Engines or Industrial floor cleaning would be advantageous. Full UK Drivers License Interaction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Sam on , Thank you for taking the time, we hope to speak in the near future
Electrical Maintenance Engineer Salary: £40,000- £44,000+Overtime Location: Letchworth, Shefford, Henlow We are currently recruiting for an experienced Electrical Maintenance Engineer to join a fast paced manufacturing facility based near Henlow. The Electrical Maintenance Engineer will be involved in all site planned and reactive maintenance and fault finding on production machinery. The Electrical Maintenance Engineer will assist with TPM, training and development of new staff, managing on site contractors and deputise for the engineering manager. This is a fantastic opportunity for a truly multi skilled maintenance engineer to join a very well established company who are offering long term career development. Skills required for the Electrical Maintenance Engineer: Apprentice Trained Electrical Qualfication Experience working in manufacturing environment or heavy industrial environment Mechanical experience with hydraulics, pneumatics, gearboxes, belts, bearings, chains Electrical experience with motors, contactors, relays, sensors and fault finding Proactive attitude and willing to learn new skills The Electrical Maintenance Engineer will benefit from: Competitive benefits and pension package Training and development Progression Chances to progress into senior engineering roles Benefits: Overtime, pension, health care If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details
Apr 18, 2024
Full time
Electrical Maintenance Engineer Salary: £40,000- £44,000+Overtime Location: Letchworth, Shefford, Henlow We are currently recruiting for an experienced Electrical Maintenance Engineer to join a fast paced manufacturing facility based near Henlow. The Electrical Maintenance Engineer will be involved in all site planned and reactive maintenance and fault finding on production machinery. The Electrical Maintenance Engineer will assist with TPM, training and development of new staff, managing on site contractors and deputise for the engineering manager. This is a fantastic opportunity for a truly multi skilled maintenance engineer to join a very well established company who are offering long term career development. Skills required for the Electrical Maintenance Engineer: Apprentice Trained Electrical Qualfication Experience working in manufacturing environment or heavy industrial environment Mechanical experience with hydraulics, pneumatics, gearboxes, belts, bearings, chains Electrical experience with motors, contactors, relays, sensors and fault finding Proactive attitude and willing to learn new skills The Electrical Maintenance Engineer will benefit from: Competitive benefits and pension package Training and development Progression Chances to progress into senior engineering roles Benefits: Overtime, pension, health care If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details
Department: Maintenance - will be based across 5 sites, all within a close proximity to each other in Rochdale, Greater Manchester, United Kingdom. Working hours: 8.00am to 5.00pm Monday to Thursday & 8.00am to 1.00pm Friday. Benefits: 25 days' holiday + Bank Holidays. Summer & Christmas shutdown periods. Company pension contribution. Early finish Fridays. Potential for career development in a supportive & collaborative environment. Mileage usage reimbursement. Discretionary Christmas award. Free, on-site parking at every site. Main responsibilities: Ensuring that all plant and equipment are functioning correctly and optimised. Continual improvement of equipment Keep up to date with new regulations Ensure that all standards are kept up to date Ensure that all equipment meets European machinery standards Essential skills: Self-development with maintaining knowledge of current regulations. Good fault finding abilities and resolving issues in a breakdown environment. Knowledge of hydraulics, pneumatics, mechanical machinery and polyurethane processing equipment Knowledge and fault finding with PLC systems Required qualifications: Electrical Engineering Qualifications
Apr 18, 2024
Full time
Department: Maintenance - will be based across 5 sites, all within a close proximity to each other in Rochdale, Greater Manchester, United Kingdom. Working hours: 8.00am to 5.00pm Monday to Thursday & 8.00am to 1.00pm Friday. Benefits: 25 days' holiday + Bank Holidays. Summer & Christmas shutdown periods. Company pension contribution. Early finish Fridays. Potential for career development in a supportive & collaborative environment. Mileage usage reimbursement. Discretionary Christmas award. Free, on-site parking at every site. Main responsibilities: Ensuring that all plant and equipment are functioning correctly and optimised. Continual improvement of equipment Keep up to date with new regulations Ensure that all standards are kept up to date Ensure that all equipment meets European machinery standards Essential skills: Self-development with maintaining knowledge of current regulations. Good fault finding abilities and resolving issues in a breakdown environment. Knowledge of hydraulics, pneumatics, mechanical machinery and polyurethane processing equipment Knowledge and fault finding with PLC systems Required qualifications: Electrical Engineering Qualifications
Department: Maintenance - will be based across 5 sites, all within a close proximity to each other in Rochdale, Greater Manchester, United Kingdom. Working hours: 8.00am to 5.00pm Monday to Thursday & 8.00am to 1.00pm Friday. Benefits: 25 days' holiday + Bank Holidays. Summer & Christmas shutdown periods. Company pension contribution. Early finish Fridays. Potential for career development in a supportive & collaborative environment. Mileage usage reimbursement. Discretionary Christmas award. Free, on-site parking at every site. Main responsibilities: Ensuring that all plant and equipment are functioning correctly and optimised. Continual improvement of equipment Keep up to date with new regulations Ensure that all standards are kept up to date Ensure that all equipment meets European machinery standards Essential skills: Self-development with maintaining knowledge of current regulations. Good fault finding abilities and resolving issues in a breakdown environment. Knowledge of hydraulics, pneumatics, mechanical machinery and polyurethane processing equipment Knowledge and fault finding with PLC systems Required qualifications: Electrical Engineering Qualifications
Apr 18, 2024
Full time
Department: Maintenance - will be based across 5 sites, all within a close proximity to each other in Rochdale, Greater Manchester, United Kingdom. Working hours: 8.00am to 5.00pm Monday to Thursday & 8.00am to 1.00pm Friday. Benefits: 25 days' holiday + Bank Holidays. Summer & Christmas shutdown periods. Company pension contribution. Early finish Fridays. Potential for career development in a supportive & collaborative environment. Mileage usage reimbursement. Discretionary Christmas award. Free, on-site parking at every site. Main responsibilities: Ensuring that all plant and equipment are functioning correctly and optimised. Continual improvement of equipment Keep up to date with new regulations Ensure that all standards are kept up to date Ensure that all equipment meets European machinery standards Essential skills: Self-development with maintaining knowledge of current regulations. Good fault finding abilities and resolving issues in a breakdown environment. Knowledge of hydraulics, pneumatics, mechanical machinery and polyurethane processing equipment Knowledge and fault finding with PLC systems Required qualifications: Electrical Engineering Qualifications
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 18, 2024
Contractor
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 18, 2024
Contractor
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight in Barrow 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 18, 2024
Contractor
Fluid Systems Engineers Initial 12 Month Contract - 2 days per fortnight in Barrow 65.98 per hour (Inside IR35) A leading global defense, security, and aerospace company. They design, manufacture, and support complex naval platforms and maritime systems, including submarines. Their commitment to innovation and excellence ensures that they deliver cutting-edge solutions to customers worldwide. Position Overview: We are seeking a numbe of talented and motivated Fluid Systems Engineers to join a dynamic team. As a Fluid Systems Engineer, you will play a critical role in the design, development, and integration of fluid systems within submarine platforms. You will work on a variety of projects, collaborating with cross-functional teams to ensure the performance, reliability, and safety of fluid systems onboard submarines. Key Responsibilities: Design and analyse fluid systems, including hydraulic, pneumatic, and cooling systems, to meet technical requirements and performance objectives. Develop detailed engineering designs, specifications, and drawings for fluid systems components and subsystems. Conduct engineering analyses, simulations, and calculations to assess fluid dynamics, thermal management, and system performance. Collaborate with other engineering disciplines, including mechanical, electrical, and structural engineers, to integrate fluid systems into overall submarine designs. Participate in design reviews, risk assessments, and technical meetings to identify and resolve issues related to fluid systems. Support the procurement, installation, and testing of fluid systems components and equipment onboard submarines. Provide technical expertise and guidance to junior engineers and support staff as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Naval Architecture, or a related field. Master's degree preferred. Proven experience (5+ years) in the design, analysis, and integration of fluid systems in marine, aerospace, or defense applications. Proficiency in engineering software tools such as CAD, CFD, and FEA for fluid dynamics and thermal analysis. Strong knowledge of fluid mechanics, thermodynamics, and heat transfer principles. Familiarity with relevant industry standards, regulations, and best practices for fluid systems design and safety. Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and stakeholders. Demonstrated problem-solving abilities and attention to detail. Eligibility for security clearance. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Service Engineer required for my client based in Barnsley who work within the polyurethane manufacturing equipment industry of engineering and manufacturing. The successful service engineer would currently be in the workshop with occasional site visits but this will change once the work load changes and then the successful service engineer will be on site 3days a week but it will be planned breakdowns / schedules. Service Engineer Position Overview Working on new equipment builds and commissioning Servicing and testing of old new equipment - both on and off site. Working on-site at various locations in the UK and potentially worldwide. Provide installations of new equipment, provide rapid response to breakdown repairs. Perform and assist with fault finding / diagnostics, repairs and service of polyurethane metering machines. Service Engineer Position Requirements Good working knowledge of electrical and mechanical systems. A solid engineering background - with knowledge of pneumatic and hydraulic systems. A logical mind to fulfil fault finding and problem solving within the role. Knowledge of PLC control systems. Manage and lead on-site requirements. Willing to work and travel away from home when required. Based within a commutable distance of Barnsley. Full UK driving licence. Service Engineer Position Remuneration Salary - £30,000 to £35,000 - dependent upon experience Full time position Holiday package - 20 days + bank holidays. Company pension scheme. Company van on completion of in-house training. Other company benefits. Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Apr 18, 2024
Full time
Service Engineer required for my client based in Barnsley who work within the polyurethane manufacturing equipment industry of engineering and manufacturing. The successful service engineer would currently be in the workshop with occasional site visits but this will change once the work load changes and then the successful service engineer will be on site 3days a week but it will be planned breakdowns / schedules. Service Engineer Position Overview Working on new equipment builds and commissioning Servicing and testing of old new equipment - both on and off site. Working on-site at various locations in the UK and potentially worldwide. Provide installations of new equipment, provide rapid response to breakdown repairs. Perform and assist with fault finding / diagnostics, repairs and service of polyurethane metering machines. Service Engineer Position Requirements Good working knowledge of electrical and mechanical systems. A solid engineering background - with knowledge of pneumatic and hydraulic systems. A logical mind to fulfil fault finding and problem solving within the role. Knowledge of PLC control systems. Manage and lead on-site requirements. Willing to work and travel away from home when required. Based within a commutable distance of Barnsley. Full UK driving licence. Service Engineer Position Remuneration Salary - £30,000 to £35,000 - dependent upon experience Full time position Holiday package - 20 days + bank holidays. Company pension scheme. Company van on completion of in-house training. Other company benefits. Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Multi-Skilled Maintenance Engineer - Lisburn - Continental Shifts - Market Leading Package Multi-Skilled Maintenance Engineer (electrical bias) - Lisburn - Continental Shifts - Market Leading Package Your New Company Our client is iconic the world over and this is your opportunity to join a family of over 36000 people! Your New Role As a Multi-Skilled Maintenance Engineer / Technician (electrical bias), you will be a key member of the engineering team, working across all shifts where your actions will directly impact our overall site performance. You will carry out maintenance tasks as required, including both attending to breakdowns and routine preventative maintenance programmes in order to minimise machinery downtime. Whilst on shift your key duties will include, but are not limited to: Solving reasons for breakdown and undertaking corrective and preventative actions to resolve • Repairs and maintenance of PLC controlled machinery • The recording and reporting of maintenance activities • Conducting equipment inspections and determine appropriate job work scopes and standards • Creating and maintaining plant history and other technical files to include information in current job plans to anticipate and avoid job delays • Providing technical assistance as required to improve the reliability and performance of the plant's machinery • Complying with company policies and procedures, inc. Health & Safety Standards • Utilising a computer-based maintenance management system to support the maintenance function. What You'll Need To Succeed You will require the following: NVQ Level 3 mechanical / engineering qualification or equivalent • (Essential) Minimum 4 GCSEs including English and Maths at grade C or above, or equivalent • Must be time/skill-served mechanically, electrically advantageous, with Industrial Experience • Experience of fault-finding on automated machinery • Minimum 3 year's FMCG experience • Ability to read, interpret and apply information from files, mechanical drawings, catalogues, reports, and manuals • Experience of both the installation of new equipment and overhaul of existing equipment • A sound knowledge of control systems, conveyors, mechanical drives, pneumatic and hydraulic systems is essential • Experience of tig welding, turning, milling and fabrication. (Desirable) Knowledge of methods, materials, tools, and equipment in the maintenance of a modern plant • Computer literacy • 5 years experience in a similar role. What You'll Get In Return For working a continental shift pattern you will be in receipt of a highly competitive salary which is enhanced with a comprehensive OT rate, a market-leading benefits package inclusive of share scheme, health cover and excellent pension scheme and comprehensive learning and development opportunities. What You Need To Do Now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Apr 18, 2024
Full time
Multi-Skilled Maintenance Engineer - Lisburn - Continental Shifts - Market Leading Package Multi-Skilled Maintenance Engineer (electrical bias) - Lisburn - Continental Shifts - Market Leading Package Your New Company Our client is iconic the world over and this is your opportunity to join a family of over 36000 people! Your New Role As a Multi-Skilled Maintenance Engineer / Technician (electrical bias), you will be a key member of the engineering team, working across all shifts where your actions will directly impact our overall site performance. You will carry out maintenance tasks as required, including both attending to breakdowns and routine preventative maintenance programmes in order to minimise machinery downtime. Whilst on shift your key duties will include, but are not limited to: Solving reasons for breakdown and undertaking corrective and preventative actions to resolve • Repairs and maintenance of PLC controlled machinery • The recording and reporting of maintenance activities • Conducting equipment inspections and determine appropriate job work scopes and standards • Creating and maintaining plant history and other technical files to include information in current job plans to anticipate and avoid job delays • Providing technical assistance as required to improve the reliability and performance of the plant's machinery • Complying with company policies and procedures, inc. Health & Safety Standards • Utilising a computer-based maintenance management system to support the maintenance function. What You'll Need To Succeed You will require the following: NVQ Level 3 mechanical / engineering qualification or equivalent • (Essential) Minimum 4 GCSEs including English and Maths at grade C or above, or equivalent • Must be time/skill-served mechanically, electrically advantageous, with Industrial Experience • Experience of fault-finding on automated machinery • Minimum 3 year's FMCG experience • Ability to read, interpret and apply information from files, mechanical drawings, catalogues, reports, and manuals • Experience of both the installation of new equipment and overhaul of existing equipment • A sound knowledge of control systems, conveyors, mechanical drives, pneumatic and hydraulic systems is essential • Experience of tig welding, turning, milling and fabrication. (Desirable) Knowledge of methods, materials, tools, and equipment in the maintenance of a modern plant • Computer literacy • 5 years experience in a similar role. What You'll Get In Return For working a continental shift pattern you will be in receipt of a highly competitive salary which is enhanced with a comprehensive OT rate, a market-leading benefits package inclusive of share scheme, health cover and excellent pension scheme and comprehensive learning and development opportunities. What You Need To Do Now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. #
Morgan Jones Recruitment Consultants
Rochester, Kent
CNC Setter Location Rochester Salary - £28,080 to £32,280 per annum Hours - Core hours are 8 am to 4:30 pm Monday to Friday with overtime available on weekends Permanent Are you an experienced CNC setter/operator/programmer? Do you have experience of operating CNC Lathe machines? Are you familiar with ISO (Fanuc) programming language? My client a High-end hydraulic manufacturing and repair company with clients across a variety of industries is seeking an experienced CNC Setter to join their team in Rochester. Responsibilities for the role of CNC Setter Operate and set lathe operation in a safety-conscious manner Collaborate with the existing team to optimise production workflows and procedures Competently operate and set machines with multi-station head tooling Operate and use manual milling machinery in an efficient and safe manner Plan workloads and requirements for completion of orders to a deadline Ensure compliance with safety regulations and company standards Other duties as deemed reasonable Skills and Experience required for the role of CNC Setter Must be fully conversant in ISO Fanuc programming language Proven experience in production engineering, preferably in a manufacturing environment Strong knowledge of general mechanical engineering principles Must have a sound footing in workload management and order completion to deadlines Excellent interpersonal skills and ability to work effectively in a team Detail-oriented with a proactive approach to problem-solving Strong communication skills, both verbal and written Ability to thrive in a fast-paced, deadline-driven environment Benefits Company pension Free parking On-site parking To find out more about the position, please apply and we will be in touch to discuss the role in more detail. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
Apr 18, 2024
Full time
CNC Setter Location Rochester Salary - £28,080 to £32,280 per annum Hours - Core hours are 8 am to 4:30 pm Monday to Friday with overtime available on weekends Permanent Are you an experienced CNC setter/operator/programmer? Do you have experience of operating CNC Lathe machines? Are you familiar with ISO (Fanuc) programming language? My client a High-end hydraulic manufacturing and repair company with clients across a variety of industries is seeking an experienced CNC Setter to join their team in Rochester. Responsibilities for the role of CNC Setter Operate and set lathe operation in a safety-conscious manner Collaborate with the existing team to optimise production workflows and procedures Competently operate and set machines with multi-station head tooling Operate and use manual milling machinery in an efficient and safe manner Plan workloads and requirements for completion of orders to a deadline Ensure compliance with safety regulations and company standards Other duties as deemed reasonable Skills and Experience required for the role of CNC Setter Must be fully conversant in ISO Fanuc programming language Proven experience in production engineering, preferably in a manufacturing environment Strong knowledge of general mechanical engineering principles Must have a sound footing in workload management and order completion to deadlines Excellent interpersonal skills and ability to work effectively in a team Detail-oriented with a proactive approach to problem-solving Strong communication skills, both verbal and written Ability to thrive in a fast-paced, deadline-driven environment Benefits Company pension Free parking On-site parking To find out more about the position, please apply and we will be in touch to discuss the role in more detail. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership in the UK and Ireland, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group As a Rebuild Repair Engineer you will be based in one of Finning's workshops, your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary -£35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background in materials handling Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you would like to work for a global organisation offering industry leading training and a competitive package then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Apr 18, 2024
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: Working within an industry leading organisation at Finning, and the largest CAT dealership in the UK and Ireland, your role as Rebuild Repair Engineer will be carrying out reconditioning and maintenance on Caterpillar products and supporting 2nd life overhauls to products within the Construction Equipment product group As a Rebuild Repair Engineer you will be based in one of Finning's workshops, your role to ensure that the refurbishment of Caterpillar products are carried out to Finning standards and customer requirements Job Description: We are looking for a highly experienced and motivated individual with a track record of strong electrical, hydraulic and engine troubleshooting skills who would be suited to a role in a large workshop environment supporting the repair and maintenance of CAT machinery. As a Finning Engineer you will receive: Salary -£35,000 - £39,800 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension (matched by company) life insurance Laptop and phone, Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. Major Job Functions Undertake a detailed inspection of the machine to confirm or expand on any initial field inspection report so that a commercial assessment of the likely repair, replacement refurbishment work can be made. Carry out standard diagnosis tests on machine components to enable more accurate cost evaluations or for the issue of condition and warranty agreements to customers. Produce a comprehensive list of parts and materials required for the proposed machine preparation work. Undertake overhaul, repair or refurbishment work on the machine to the agreed work plan, removing and dispatching components for specialist attention, re-installing the original or replacement part or repairing original parts. Inspect and test completed machine to ensure unit is operating to expected performance levels. Specific Skills Flexibility, organisational and time management skills Excellent attention to detail, work accuracy/numeracy and quality orientated Work autonomously on own initiative and also well as part of a team Strong communication and interpersonal skills and ability to build positive relationships across all levels of the business Motivated and dynamic self-starter Strong planning and organisational skills with the ability to work under pressure to tight deadlines Effective problem-solver with strong analytical skills A committed and positive attitude along with an obvious customer focus and the ability to build a positive rapport with customers Knowledge Deep understanding of the use of general service manuals and computerised Service Information System (SIS) from the OEM Practical knowledge of tooling and specialised equipment to conduct repairs on difficult and heavy machinery Practical knowledge of rigging, slinging and jacking procedures Electrical, hydraulic and mechanical fitting knowledge Accountability Adhere to agreed job times. Ensure the highest quality of finished machines. Maintain availability of machines ready to hire and presentation of machine stock parked in yard. Ensure positive feedback/nil customer complaints. Constant awareness of SHEQ obligations and zero accidents by maintaining a tidy and safe working area. Education and Experience Preferably with a background in materials handling Either apprentice trained or minimum 5 years' experience in quality service environment within a similar industry A licence to drive reach trucks is required Practical experience in operating construction equipment in confined spaces and mechanical fitting work on large-scale machines If you would like to work for a global organisation offering industry leading training and a competitive package then apply online today At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter.
Morgan Jones Recruitment Consultants
Rochester, Kent
CNC Setter Location Rochester Salary - £28,080 to £32,280 per annum Hours - Core hours are 8 am to 4:30 pm Monday to Friday with overtime available on weekends Permanent Are you an experienced CNC setter/operator/programmer? Do you have experience of operating CNC Lathe machines? Are you familiar with ISO (Fanuc) programming language? My client a High-end hydraulic manufacturing and repair company with clients across a variety of industries is seeking an experienced CNC Setter to join their team in Rochester. Responsibilities for the role of CNC Setter Operate and set lathe operation in a safety-conscious manner Collaborate with the existing team to optimise production workflows and procedures Competently operate and set machines with multi-station head tooling Operate and use manual milling machinery in an efficient and safe manner Plan workloads and requirements for completion of orders to a deadline Ensure compliance with safety regulations and company standards Other duties as deemed reasonable Skills and Experience required for the role of CNC Setter Must be fully conversant in ISO Fanuc programming language Proven experience in production engineering, preferably in a manufacturing environment Strong knowledge of general mechanical engineering principles Must have a sound footing in workload management and order completion to deadlines Excellent interpersonal skills and ability to work effectively in a team Detail-oriented with a proactive approach to problem-solving Strong communication skills, both verbal and written Ability to thrive in a fast-paced, deadline-driven environment Benefits Company pension Free parking On-site parking To find out more about the position, please apply and we will be in touch to discuss the role in more detail. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
Apr 18, 2024
Full time
CNC Setter Location Rochester Salary - £28,080 to £32,280 per annum Hours - Core hours are 8 am to 4:30 pm Monday to Friday with overtime available on weekends Permanent Are you an experienced CNC setter/operator/programmer? Do you have experience of operating CNC Lathe machines? Are you familiar with ISO (Fanuc) programming language? My client a High-end hydraulic manufacturing and repair company with clients across a variety of industries is seeking an experienced CNC Setter to join their team in Rochester. Responsibilities for the role of CNC Setter Operate and set lathe operation in a safety-conscious manner Collaborate with the existing team to optimise production workflows and procedures Competently operate and set machines with multi-station head tooling Operate and use manual milling machinery in an efficient and safe manner Plan workloads and requirements for completion of orders to a deadline Ensure compliance with safety regulations and company standards Other duties as deemed reasonable Skills and Experience required for the role of CNC Setter Must be fully conversant in ISO Fanuc programming language Proven experience in production engineering, preferably in a manufacturing environment Strong knowledge of general mechanical engineering principles Must have a sound footing in workload management and order completion to deadlines Excellent interpersonal skills and ability to work effectively in a team Detail-oriented with a proactive approach to problem-solving Strong communication skills, both verbal and written Ability to thrive in a fast-paced, deadline-driven environment Benefits Company pension Free parking On-site parking To find out more about the position, please apply and we will be in touch to discuss the role in more detail. About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy which can be found on our website. Due to the high volume of applicants we see, if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on your favourite social networks Facebook, Instagram, Twitter, or LinkedIn.
SMT GB have an exciting opportunity for an experienced heavy plant engineer or fitter who is passionate about engineering excellence and sustainability. Position: Workshop Engineer Location: Warrington Responsibilities: Service, maintenance, and repair heavy Volvo construction equipment Identify mechanical problems using technical knowledge and computerized systems Work within a workshop environment Benefits: Great base salary with annual pay reviews 38.5 hours per week with enhanced overtime rates 33 days annual leave (including bank holidays) 5% company pension contribution Company profit share bonus paid twice per annum Annual OEM training Healthshield medical and dental cash plan Yulife discounts across major UK retailers Refer a friend cash incentive Choice of SMT branded clothing/uniform Overalls provided and laundered weekly Requirements: Must hold an NVQ Level 3 in Plant Maintenance or Land Based Engineering Mechanical experience with construction or heavy plant machinery Comprehensive understanding of hydraulics and electronics Ability to work independently to a high standard of competence Full UK Driving Licence Right to work in the UK Company: Services, Machinery and Trucks (SMT) GB Internationally recognized market-leading distributor of Volvo Construction Equipment Dedicated to attracting, inspiring, growing, engaging, and retaining talented employees Interested candidates can apply by clicking below or contacting Dee Gregory at (phone number removed). This opportunity offers a chance to be part of a dynamic team shaping the future of construction equipment engineering while enjoying competitive benefits and opportunities for professional development.
Apr 18, 2024
Full time
SMT GB have an exciting opportunity for an experienced heavy plant engineer or fitter who is passionate about engineering excellence and sustainability. Position: Workshop Engineer Location: Warrington Responsibilities: Service, maintenance, and repair heavy Volvo construction equipment Identify mechanical problems using technical knowledge and computerized systems Work within a workshop environment Benefits: Great base salary with annual pay reviews 38.5 hours per week with enhanced overtime rates 33 days annual leave (including bank holidays) 5% company pension contribution Company profit share bonus paid twice per annum Annual OEM training Healthshield medical and dental cash plan Yulife discounts across major UK retailers Refer a friend cash incentive Choice of SMT branded clothing/uniform Overalls provided and laundered weekly Requirements: Must hold an NVQ Level 3 in Plant Maintenance or Land Based Engineering Mechanical experience with construction or heavy plant machinery Comprehensive understanding of hydraulics and electronics Ability to work independently to a high standard of competence Full UK Driving Licence Right to work in the UK Company: Services, Machinery and Trucks (SMT) GB Internationally recognized market-leading distributor of Volvo Construction Equipment Dedicated to attracting, inspiring, growing, engaging, and retaining talented employees Interested candidates can apply by clicking below or contacting Dee Gregory at (phone number removed). This opportunity offers a chance to be part of a dynamic team shaping the future of construction equipment engineering while enjoying competitive benefits and opportunities for professional development.