We are looking for a Reliability Centred Maintenance Engineer to join our team! As a Reliability Centred Maintenance Engineer you will be using the Infor Enterprise Asset Management (EAM) system to maximise its potential and effect a change in maintenance ethos and approach to increase asset availability, reduce downtime and maintenance costs, whilst maintaining all regulatory requirements. This will also involve the development of EAM to optimise its use in standardising work packages across the business, maintaining the engineering and maintenance aspects of the system and working with the project team responsible for rolling out Infor EAM. Some travel in the UK and weekend working may be required. You can be based anywhere in the UK Key Accountabilities Development of Infor EAM (following training on the system) to optimise engineering and maintenance processes. Use of EAM to conduct RCM analysis and provide evidence and recommendations for improved engineering performance. Using EAM data, conduct analysis of failure mode trends to a granular level sufficient for decisions to be made on improvement measures. Creation of Standard Work Orders within EAM to streamline and standardise repair processes, involving the collation of procedures, parts and codification of engineering tasks across the range of chassis types in the fleet. Development of reports and key performance indicators alongside system SMEs. Conducting maintenance of the system for business as usual activities ensuring that corporate and regulatory compliance is maintained at all times including working with the project team as required. Provide subject matter expert support to the engineering end users, working with the EAM support team and escalating issues that cannot be resolved. Communicating and interacting with end users to fully understand and resolve issues, delivering additional system training where required and explaining the fundamentals of EAM. Skills Experience & Qualifications Have a strong engineering background that can be applied to understand how procedures are converted to workflows and interact within the business rules applied on a digital system. Have demonstrable RCM experience on a digital asset management platform. Strong understanding and experience using failure mode and root cause statistical analysis methods such as SPC/Weibull. Experience working in an industry governed by defined regulations. Be IT literate and fully conversant with Microsoft packages in particular Excel. An extremely high attention to detail and accuracy. Methodical and logical approach to tasks, comfortable working to deadlines. Excellent organisational and administrative skills. The ability to function well independently and as part of a team. Comfortable and confident in speaking to a range of employee roles to impart knowledge and gain information as required. Infor EAM training will be provided. About Us: One of the UK's largest bus operators, our team of 17,000 Journey Makers helps 1.6 million customers every single day to get to where they want to go. Working for First UK Bus you'll find your role varied, rewarding and satisfying. You'll work alongside our great team who all pull together to do a brilliant job - no two days are ever the same. Interested? Click on apply and complete an application form! FirstGroup plc welcomes applications from a diverse range of candidates regardless of background, gender, race, religious beliefs, disability, sexual orientation or age. We aspire to be a diverse and inclusive organisation because we believe that diversity brings benefits for our customers, communities and our people. Valuing our differences and drawing on our collective knowledge and experience helps us develop new services, open up new markets and broaden our customer base.
Jan 17, 2021
Full time
We are looking for a Reliability Centred Maintenance Engineer to join our team! As a Reliability Centred Maintenance Engineer you will be using the Infor Enterprise Asset Management (EAM) system to maximise its potential and effect a change in maintenance ethos and approach to increase asset availability, reduce downtime and maintenance costs, whilst maintaining all regulatory requirements. This will also involve the development of EAM to optimise its use in standardising work packages across the business, maintaining the engineering and maintenance aspects of the system and working with the project team responsible for rolling out Infor EAM. Some travel in the UK and weekend working may be required. You can be based anywhere in the UK Key Accountabilities Development of Infor EAM (following training on the system) to optimise engineering and maintenance processes. Use of EAM to conduct RCM analysis and provide evidence and recommendations for improved engineering performance. Using EAM data, conduct analysis of failure mode trends to a granular level sufficient for decisions to be made on improvement measures. Creation of Standard Work Orders within EAM to streamline and standardise repair processes, involving the collation of procedures, parts and codification of engineering tasks across the range of chassis types in the fleet. Development of reports and key performance indicators alongside system SMEs. Conducting maintenance of the system for business as usual activities ensuring that corporate and regulatory compliance is maintained at all times including working with the project team as required. Provide subject matter expert support to the engineering end users, working with the EAM support team and escalating issues that cannot be resolved. Communicating and interacting with end users to fully understand and resolve issues, delivering additional system training where required and explaining the fundamentals of EAM. Skills Experience & Qualifications Have a strong engineering background that can be applied to understand how procedures are converted to workflows and interact within the business rules applied on a digital system. Have demonstrable RCM experience on a digital asset management platform. Strong understanding and experience using failure mode and root cause statistical analysis methods such as SPC/Weibull. Experience working in an industry governed by defined regulations. Be IT literate and fully conversant with Microsoft packages in particular Excel. An extremely high attention to detail and accuracy. Methodical and logical approach to tasks, comfortable working to deadlines. Excellent organisational and administrative skills. The ability to function well independently and as part of a team. Comfortable and confident in speaking to a range of employee roles to impart knowledge and gain information as required. Infor EAM training will be provided. About Us: One of the UK's largest bus operators, our team of 17,000 Journey Makers helps 1.6 million customers every single day to get to where they want to go. Working for First UK Bus you'll find your role varied, rewarding and satisfying. You'll work alongside our great team who all pull together to do a brilliant job - no two days are ever the same. Interested? Click on apply and complete an application form! FirstGroup plc welcomes applications from a diverse range of candidates regardless of background, gender, race, religious beliefs, disability, sexual orientation or age. We aspire to be a diverse and inclusive organisation because we believe that diversity brings benefits for our customers, communities and our people. Valuing our differences and drawing on our collective knowledge and experience helps us develop new services, open up new markets and broaden our customer base.
Global Logistics Staff Ltd
Weston-super-mare, Somerset
We have an exciting opportunity to join our Mendips project, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the Project. We require operators who not only have the appropriate experience, but with the right attitude and attention to detail to help deliver a project...... click apply for full job details
Jan 15, 2021
Contractor
We have an exciting opportunity to join our Mendips project, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the Project. We require operators who not only have the appropriate experience, but with the right attitude and attention to detail to help deliver a project...... click apply for full job details
We have exciting opportunities to join our existing team on the M4, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the M4 Project Smart Motorway Upgrade in Reading. We require operators who not only have the appropriate experience, but with the right attitude and a...... click apply for full job details
Jan 15, 2021
Contractor
We have exciting opportunities to join our existing team on the M4, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the M4 Project Smart Motorway Upgrade in Reading. We require operators who not only have the appropriate experience, but with the right attitude and a...... click apply for full job details
Machine Operators Do you want to be a part of something that might just change the world? We are one of the UK's top fruit growers and we're focused on the bigger picture....feeding the nation with high quality fresh produce whilst actively changing the way we do this that will protect the land and our planet for years to come...... click apply for full job details
Jan 15, 2021
Full time
Machine Operators Do you want to be a part of something that might just change the world? We are one of the UK's top fruit growers and we're focused on the bigger picture....feeding the nation with high quality fresh produce whilst actively changing the way we do this that will protect the land and our planet for years to come...... click apply for full job details
Flomatik Network Services are seeking GIS Operators to work in our GIS team based in our new offices in Fort Dunlop (home based initially), Birmingham. Working on major accounts with household telecoms names you'll be working in the team which is responsible for all large-scale telecommunication network infrastructure projects throughout the UK (we have a cross functional teams including Network P...... click apply for full job details
Jan 15, 2021
Full time
Flomatik Network Services are seeking GIS Operators to work in our GIS team based in our new offices in Fort Dunlop (home based initially), Birmingham. Working on major accounts with household telecoms names you'll be working in the team which is responsible for all large-scale telecommunication network infrastructure projects throughout the UK (we have a cross functional teams including Network P...... click apply for full job details
We have an exciting opportunity to join our team on the HS2 project, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the Project throughout the year. We require operators who not only have the appropriate experience, but with the right attitude and attention to deta...... click apply for full job details
Jan 15, 2021
Contractor
We have an exciting opportunity to join our team on the HS2 project, working for one of the largest infrastructure groups in Europe. Working in partnership with the Earth Moving contract, we are looking to recruit additional operators to partner us on the Project throughout the year. We require operators who not only have the appropriate experience, but with the right attitude and attention to deta...... click apply for full job details
Goodwin International Ltd
Stoke-on-trent, Staffordshire
Goodwin International now have immediate opportunities for experienced and skilled CNC Setter Operators to join our permanent night shift. We would be particularly interested in hearing from CNC Setter/Operators who have set and operated Large Vertical Turning machines and be familiar with Fanuc OT controls. Applicants will ideally need at least 5 years machining experience and be capable of producin...... click apply for full job details
Jan 15, 2021
Full time
Goodwin International now have immediate opportunities for experienced and skilled CNC Setter Operators to join our permanent night shift. We would be particularly interested in hearing from CNC Setter/Operators who have set and operated Large Vertical Turning machines and be familiar with Fanuc OT controls. Applicants will ideally need at least 5 years machining experience and be capable of producin...... click apply for full job details
Staff365 are actively seeking a number of CNC operators for our client in Sheffield S26. Ideal candidates will have experience of operating more than one machine in sequence and be competent at measuring parts using micrometers. You will be working within a manufactur... ..... click apply for full job details
Jan 15, 2021
Seasonal
Staff365 are actively seeking a number of CNC operators for our client in Sheffield S26. Ideal candidates will have experience of operating more than one machine in sequence and be competent at measuring parts using micrometers. You will be working within a manufactur... ..... click apply for full job details
Machine Operators Weekend Night Shift £14.24 per hour 37 hours per week Due to increased orders my client is looking to recruit 2 machine operators Knowledge of turning You... ..... click apply for full job details
Jan 15, 2021
Seasonal
Machine Operators Weekend Night Shift £14.24 per hour 37 hours per week Due to increased orders my client is looking to recruit 2 machine operators Knowledge of turning You... ..... click apply for full job details
Erdington Based Flexographic Printing Firm has vacancies for machine operators and print finishers. This is a full time job 40 hours a week, Experience not necessary as training can be provided. pay will start at minimum wage rate for UK, Higher rates may be considered dependi... ...... click apply for full job details
Jan 14, 2021
Full time
Erdington Based Flexographic Printing Firm has vacancies for machine operators and print finishers. This is a full time job 40 hours a week, Experience not necessary as training can be provided. pay will start at minimum wage rate for UK, Higher rates may be considered dependi... ...... click apply for full job details
SHAPE are looking for experienced CNC machine operators to join our growing team and work within our existing composite machine shop. You will enjoy working in a modern patternshop environment, to tight deadlines and working to exacting customer requirements. RESPONSIBILITIES •Operating CMS Antares 5-axis milling machines with Fanuc controllers •Perform general day to day workshop duties •Working to a...... click apply for full job details
Jan 13, 2021
Full time
SHAPE are looking for experienced CNC machine operators to join our growing team and work within our existing composite machine shop. You will enjoy working in a modern patternshop environment, to tight deadlines and working to exacting customer requirements. RESPONSIBILITIES •Operating CMS Antares 5-axis milling machines with Fanuc controllers •Perform general day to day workshop duties •Working to a...... click apply for full job details
We are looking for a number of experienced CNC Machine Operators to join our busy and growing Operations team, producing machined components on a range of high-quality Heller, Grob and Matsuura CNC machine tools! Do you have previous experience as a CNC machine tool operator, or a very hands-on engineering role in a similar manufacturing environment? Then we want to hear from you! We are interviewi...... click apply for full job details
Jan 12, 2021
Full time
We are looking for a number of experienced CNC Machine Operators to join our busy and growing Operations team, producing machined components on a range of high-quality Heller, Grob and Matsuura CNC machine tools! Do you have previous experience as a CNC machine tool operator, or a very hands-on engineering role in a similar manufacturing environment? Then we want to hear from you! We are interviewi...... click apply for full job details
We are looking for a Data Support (Engineering) to join our team! As Data Support you will be the support for the Engineering elements of the EAM (Enterprise Asset Management System) rollout, by using extracted data from SAP R3 and Business Warehouse (this will be provided), converting it through a series of processes and preparing it for upload to Infor EAM. You will be hosting conference calls to explain and demonstrate some areas of data preparation to end users to enable load sheets to be built. Assist with development of EAM to standardised procedures. As Data Support you will provide initial remote end user support to the engineering end users working with the Infor EAM support team. Key Points: The successful candidate can be based anywhere in the UK There may be a requirement to work occasional weekends and some travel within the UK. We are looking for the successful candidate to start in February. This is a 9-month fixed term contract Key Accountabilities Work alongside the Infor EAM project team to develop the Engineering Maintenance Workstream as required. Following / developing processes to convert and prepare data accurately, completely and work with other team members and end users to validate as far as possible accepting and understanding the importance and responsibility of this task. Host conference calls to explain and demonstrate the build of shift pattern load sheets and then collect, validate and upload to test and live EAM environment. Provide initial customer support to the engineering users working with the EAM support team and escalating issues that cannot be resolved to the Engineering and Maintenance Manager. Supporting elements of business as usual activities as required. Skills Experience & Qualifications Have an engineering background that can be applied to understand how procedures are converted to workflows and interact within business rules applied on a digital system. IT literate and fully conversant with Microsoft packages especially Excel. An extremely high attention to detail and accuracy. Methodical and logical approach to tasks, comfortable working to deadlines. Excellent organisational and administrative skills. The ability to function well independently and as part of a team. Experience in delivering support and confidence in speaking to a range of employee roles to impart knowledge and gain required information. Experience of a digital asset management system would be an advantage. About Us: One of the UK's largest bus operators, our team of 17,000 Journey Makers helps 1.6 million customers every single day to get to where they want to go. Working for First UK Bus you'll find your role varied, rewarding and satisfying. You'll work alongside our great team who all pull together to do a brilliant job - no two days are ever the same. Interested? Click on apply and complete an application form! FirstGroup plc welcomes applications from a diverse range of candidates regardless of background, gender, race, religious beliefs, disability, sexual orientation or age. We aspire to be a diverse and inclusive organisation because we believe that diversity brings benefits for our customers, communities and our people. Valuing our differences and drawing on our collective knowledge and experience helps us develop new services, open up new markets and broaden our customer base.
Jan 11, 2021
Full time
We are looking for a Data Support (Engineering) to join our team! As Data Support you will be the support for the Engineering elements of the EAM (Enterprise Asset Management System) rollout, by using extracted data from SAP R3 and Business Warehouse (this will be provided), converting it through a series of processes and preparing it for upload to Infor EAM. You will be hosting conference calls to explain and demonstrate some areas of data preparation to end users to enable load sheets to be built. Assist with development of EAM to standardised procedures. As Data Support you will provide initial remote end user support to the engineering end users working with the Infor EAM support team. Key Points: The successful candidate can be based anywhere in the UK There may be a requirement to work occasional weekends and some travel within the UK. We are looking for the successful candidate to start in February. This is a 9-month fixed term contract Key Accountabilities Work alongside the Infor EAM project team to develop the Engineering Maintenance Workstream as required. Following / developing processes to convert and prepare data accurately, completely and work with other team members and end users to validate as far as possible accepting and understanding the importance and responsibility of this task. Host conference calls to explain and demonstrate the build of shift pattern load sheets and then collect, validate and upload to test and live EAM environment. Provide initial customer support to the engineering users working with the EAM support team and escalating issues that cannot be resolved to the Engineering and Maintenance Manager. Supporting elements of business as usual activities as required. Skills Experience & Qualifications Have an engineering background that can be applied to understand how procedures are converted to workflows and interact within business rules applied on a digital system. IT literate and fully conversant with Microsoft packages especially Excel. An extremely high attention to detail and accuracy. Methodical and logical approach to tasks, comfortable working to deadlines. Excellent organisational and administrative skills. The ability to function well independently and as part of a team. Experience in delivering support and confidence in speaking to a range of employee roles to impart knowledge and gain required information. Experience of a digital asset management system would be an advantage. About Us: One of the UK's largest bus operators, our team of 17,000 Journey Makers helps 1.6 million customers every single day to get to where they want to go. Working for First UK Bus you'll find your role varied, rewarding and satisfying. You'll work alongside our great team who all pull together to do a brilliant job - no two days are ever the same. Interested? Click on apply and complete an application form! FirstGroup plc welcomes applications from a diverse range of candidates regardless of background, gender, race, religious beliefs, disability, sexual orientation or age. We aspire to be a diverse and inclusive organisation because we believe that diversity brings benefits for our customers, communities and our people. Valuing our differences and drawing on our collective knowledge and experience helps us develop new services, open up new markets and broaden our customer base.
Laser Operator We have a vacancy for a laser operator to work out of a Lancashire manufacturing warehouse. You will be responsible for programming and operating our client's new Amada laser machines. Requirements - What we need from you? * For the role of Laser Operator, you will be operating an Amada Laser machine so previous experience on this machine is advantageous but not essential. * You will be loading and unloading the laser machine for the role of Laser Operator. * You will also be working from engineering drawings and will require previous experience reading and interpreting drawings to be considered for the Laser Operator role. * You will have previous experience in a manufacturing/metal sector environment to be considered for the role of Laser operators role. Summary Our client are stockholders of laser cut products which they supply into the UK. Benefits * £10-13 per hour (DOE) * Monday to Friday * Overtime * 25 days holiday
Oct 02, 2020
Full time
Laser Operator We have a vacancy for a laser operator to work out of a Lancashire manufacturing warehouse. You will be responsible for programming and operating our client's new Amada laser machines. Requirements - What we need from you? * For the role of Laser Operator, you will be operating an Amada Laser machine so previous experience on this machine is advantageous but not essential. * You will be loading and unloading the laser machine for the role of Laser Operator. * You will also be working from engineering drawings and will require previous experience reading and interpreting drawings to be considered for the Laser Operator role. * You will have previous experience in a manufacturing/metal sector environment to be considered for the role of Laser operators role. Summary Our client are stockholders of laser cut products which they supply into the UK. Benefits * £10-13 per hour (DOE) * Monday to Friday * Overtime * 25 days holiday
Teconnex is a privately owned global business with sites in India, Mexico, China, and UK. We are part of the Hexadex Group. We manufacture jointing systems and technical products to meet the needs of our worldwide customers within the automotive and other industrial markets. We require a number of CNC Operators / Programmers to work with our team on a shift, producing Machinery and press tooling components. The Role - CNC Operator - shift is Mon-Thurs 2pm to 10pm - Fri 12noon to 6pm Set and Operate C.N.C. Machines. Optimise machine utilisation and performance. Contribute and implement improvement of machine cycle times. Programme on Heidenhain and Haas controls Generate C.N.C. machine programmes using Camworks/Solidworks The person Apprentice trained in mechanical engineering with experience of programming and operation of VMC milling machines, CNC Lathes and be able to understand and work with engineering drawings. Has a number of years experience utilising VMC milling machines Works to high tolerances & right first time to meet challenging production targets Solid CNC machining background spent within a volume manufacturing or engineering. We offer a competitive package - coupled with various benefits - on site parkingTo apply please apply with an up to date CV...... click apply for full job details
Sep 26, 2020
Full time
Teconnex is a privately owned global business with sites in India, Mexico, China, and UK. We are part of the Hexadex Group. We manufacture jointing systems and technical products to meet the needs of our worldwide customers within the automotive and other industrial markets. We require a number of CNC Operators / Programmers to work with our team on a shift, producing Machinery and press tooling components. The Role - CNC Operator - shift is Mon-Thurs 2pm to 10pm - Fri 12noon to 6pm Set and Operate C.N.C. Machines. Optimise machine utilisation and performance. Contribute and implement improvement of machine cycle times. Programme on Heidenhain and Haas controls Generate C.N.C. machine programmes using Camworks/Solidworks The person Apprentice trained in mechanical engineering with experience of programming and operation of VMC milling machines, CNC Lathes and be able to understand and work with engineering drawings. Has a number of years experience utilising VMC milling machines Works to high tolerances & right first time to meet challenging production targets Solid CNC machining background spent within a volume manufacturing or engineering. We offer a competitive package - coupled with various benefits - on site parkingTo apply please apply with an up to date CV...... click apply for full job details
Phoenix Gray are currently looking for a warehouse operatives to start in a busy warehouse in Romford. Previous experience is preferred but not essential, as full training will be given. This is a temp to perm role for the right candidate, and starting immediately. Role will include but is not limited to: - Heavy lifting - Assisting machine operators - General warehouse duties Working hours are Monday-Friday 7:00am - 5:30pm. Please apply now with interest, or alternatively call ...... click apply for full job details
Sep 26, 2020
Seasonal
Phoenix Gray are currently looking for a warehouse operatives to start in a busy warehouse in Romford. Previous experience is preferred but not essential, as full training will be given. This is a temp to perm role for the right candidate, and starting immediately. Role will include but is not limited to: - Heavy lifting - Assisting machine operators - General warehouse duties Working hours are Monday-Friday 7:00am - 5:30pm. Please apply now with interest, or alternatively call ...... click apply for full job details
Mando Solutions is a heavy plant recruitment agency within the quarrying and construction sector. We have over 10 years' experience in the supply of safe and competent operators, and work alongside many well-respected national clients covering most of the UK. We are currently recruiting for an 360 operator with a breaker in the Bristol area. This role will be working with a national aggregate supplier . The ideal 360 operator will be: - MPQC or CPCS accredited - An experienced 360 operator within the mineral extraction industry - Flexible with working times - Paid competitive rates If you're an accredited 360 operator and are interested in this role, please call Mando Solutions on . Mando Solutions operates as an employment business...... click apply for full job details
Sep 26, 2020
Seasonal
Mando Solutions is a heavy plant recruitment agency within the quarrying and construction sector. We have over 10 years' experience in the supply of safe and competent operators, and work alongside many well-respected national clients covering most of the UK. We are currently recruiting for an 360 operator with a breaker in the Bristol area. This role will be working with a national aggregate supplier . The ideal 360 operator will be: - MPQC or CPCS accredited - An experienced 360 operator within the mineral extraction industry - Flexible with working times - Paid competitive rates If you're an accredited 360 operator and are interested in this role, please call Mando Solutions on . Mando Solutions operates as an employment business...... click apply for full job details
Job Title: Machine Process Operator Duration: On-Going Department: Manufacturing Reporting to: Manufacturing Supervisor Pay Rate: £9.70 rising to £11.96 We are looking for a hardworking and reliable person to join the team at a world famous food manufacturer based in Burton on Trent. Immediate start MAIN PURPOSE OF THE JOB AND ACCOUNTABILITY The Machine Operator is responsible for the safe operation of production equipment to deliver customer requirements through completion of the production plan, adhering to quality standards and maximising cost effectiveness, optimal running and equipment efficiency. The Machine Operator will be expected to carry out cleaning and inspection activities and record any issues/problems with the equipment to pass to the Technical Operator to resolve. The Machine Operator should master the operation of a series of machines in order to provide factory resilience. Key Skills and Responsibilities: Technical - Knowledge and application of technical skills to Operate machinery safely and effectively in order to meet the production plan. Conduct cleaning and lubrication as required. Safety Utilise all appropriate safety and environmental procedures relating to the Sourcing Unit and allocated equipment to ensure a safe working environment for the whole team. Understand the legal responsibility placed upon individuals. Workplace Hazards - Full knowledge of the workplace and hazards within it. Utilise all appropriate safety and environmental procedures for people, processes, materials, products and equipment relevant to the task. Environment - Reduce costs due to waste and minimise impact to health, safety and the environment through working to eliminate waste and through the correct management of waste and hazardous materials. Quality - Monitors quality against set standards and reports any product and packaging faults. Detects process abnormalities quickly and takes emergency action to prevent them. Continuous Improvement - Knowledge and understanding of the key principles of WCM and an awareness of the tools used to identify and prioritise losses in the production area and eliminate them; role requires data collection. Monitor measures and performance after initial improvements and take further action as required. Problem Solving - A Working Knowledge of how to identify, prioritise and address problems using appropriate tools and techniques that eliminate recurrence. Must demonstrate initiative. Decision Making - Can make decisions to reject non-compliant products and to support the work plan for the day. Teamwork - Must be a good team player capable of working within a highly effective team; responsible, supportive and able communicator. Administration - Conducts effective hand-over activities and records accurately events that have occurred during shift. Physical Ability - Machine Operators require a level of agility to move quickly between workstations, ascend and descend steps. Assembly and control operations also require a level of hand eye coordination and finger dexterity. REQUIREMENTS Must be flexible within pattern of shift work to accommodate factory shutdowns, training courses etc. ESSENTIAL: Basic mechanical awareness of the principles for factory automation. Can maintain focus and discipline for the task whilst demonstrating good problem solving skills to protect output targets. IT Skills - Competent in the use of Machine data and control systems that record Material Movement, Losses and Quality. Must also be competent in the use of Microsoft Office; Excel and Word programmes. PREFERRED / DESIRABLE: Experience as a Machine Operator. Experience of manufacturing in a Fast Moving Consumer Goods Company. Demonstrate strong mechanical aptitude to progress onto the Technical Operator Curriculum (Entry, Developing and Full level)...... click apply for full job details
Sep 26, 2020
Seasonal
Job Title: Machine Process Operator Duration: On-Going Department: Manufacturing Reporting to: Manufacturing Supervisor Pay Rate: £9.70 rising to £11.96 We are looking for a hardworking and reliable person to join the team at a world famous food manufacturer based in Burton on Trent. Immediate start MAIN PURPOSE OF THE JOB AND ACCOUNTABILITY The Machine Operator is responsible for the safe operation of production equipment to deliver customer requirements through completion of the production plan, adhering to quality standards and maximising cost effectiveness, optimal running and equipment efficiency. The Machine Operator will be expected to carry out cleaning and inspection activities and record any issues/problems with the equipment to pass to the Technical Operator to resolve. The Machine Operator should master the operation of a series of machines in order to provide factory resilience. Key Skills and Responsibilities: Technical - Knowledge and application of technical skills to Operate machinery safely and effectively in order to meet the production plan. Conduct cleaning and lubrication as required. Safety Utilise all appropriate safety and environmental procedures relating to the Sourcing Unit and allocated equipment to ensure a safe working environment for the whole team. Understand the legal responsibility placed upon individuals. Workplace Hazards - Full knowledge of the workplace and hazards within it. Utilise all appropriate safety and environmental procedures for people, processes, materials, products and equipment relevant to the task. Environment - Reduce costs due to waste and minimise impact to health, safety and the environment through working to eliminate waste and through the correct management of waste and hazardous materials. Quality - Monitors quality against set standards and reports any product and packaging faults. Detects process abnormalities quickly and takes emergency action to prevent them. Continuous Improvement - Knowledge and understanding of the key principles of WCM and an awareness of the tools used to identify and prioritise losses in the production area and eliminate them; role requires data collection. Monitor measures and performance after initial improvements and take further action as required. Problem Solving - A Working Knowledge of how to identify, prioritise and address problems using appropriate tools and techniques that eliminate recurrence. Must demonstrate initiative. Decision Making - Can make decisions to reject non-compliant products and to support the work plan for the day. Teamwork - Must be a good team player capable of working within a highly effective team; responsible, supportive and able communicator. Administration - Conducts effective hand-over activities and records accurately events that have occurred during shift. Physical Ability - Machine Operators require a level of agility to move quickly between workstations, ascend and descend steps. Assembly and control operations also require a level of hand eye coordination and finger dexterity. REQUIREMENTS Must be flexible within pattern of shift work to accommodate factory shutdowns, training courses etc. ESSENTIAL: Basic mechanical awareness of the principles for factory automation. Can maintain focus and discipline for the task whilst demonstrating good problem solving skills to protect output targets. IT Skills - Competent in the use of Machine data and control systems that record Material Movement, Losses and Quality. Must also be competent in the use of Microsoft Office; Excel and Word programmes. PREFERRED / DESIRABLE: Experience as a Machine Operator. Experience of manufacturing in a Fast Moving Consumer Goods Company. Demonstrate strong mechanical aptitude to progress onto the Technical Operator Curriculum (Entry, Developing and Full level)...... click apply for full job details
Masstemps LTD are currently recruiting for experienced CNC setter operators to join a busy and expanding engineering company based within Stourport-On-Severn. The ideal candidate will be experienced in working with a CNC and be able to set and operate. Brake press experience is preferred but not essential Hours of work: Monday - Friday 3pm - 12am. This is a temp to perm role. Immediate starts available. If you require further information or wish to apply for this role please call ...... click apply for full job details
Sep 26, 2020
Full time
Masstemps LTD are currently recruiting for experienced CNC setter operators to join a busy and expanding engineering company based within Stourport-On-Severn. The ideal candidate will be experienced in working with a CNC and be able to set and operate. Brake press experience is preferred but not essential Hours of work: Monday - Friday 3pm - 12am. This is a temp to perm role. Immediate starts available. If you require further information or wish to apply for this role please call ...... click apply for full job details
Mando Solutions is a heavy plant recruitment agency within the quarrying and construction sector. We have over 10 years' experience in the supply of safe and competent operators, and work alongside many well-respected national clients covering most of the UK. We are currently recruiting for a Groundworker/Ride on Roller Operator in the St.Albans area. This role will be working with a national aggregate supplier . The ideal Groundworker/Ride on Roller Operator will be: - Flexible with working times - Paid competitive rates If you're an accredited Groundworker/Ride on Roller Operator and are interested in this role, please call Mando Solutions on . Mando Solutions operates as an employment business...... click apply for full job details
Sep 26, 2020
Seasonal
Mando Solutions is a heavy plant recruitment agency within the quarrying and construction sector. We have over 10 years' experience in the supply of safe and competent operators, and work alongside many well-respected national clients covering most of the UK. We are currently recruiting for a Groundworker/Ride on Roller Operator in the St.Albans area. This role will be working with a national aggregate supplier . The ideal Groundworker/Ride on Roller Operator will be: - Flexible with working times - Paid competitive rates If you're an accredited Groundworker/Ride on Roller Operator and are interested in this role, please call Mando Solutions on . Mando Solutions operates as an employment business...... click apply for full job details
