Team Jobs- Strategic Accounts
Portsmouth, Hampshire
Team Jobs is currently seeking for candidate with Engineering experience, starting from May 2024. The perfect candidate have can do attitude and 2 years of experience in a technician role within a manufacturing industry.We are looking with a Engineering background and practical experience who can start without deep training and is ready for the role. Job type: Full time Monday - Thursday 08:00 - 16:45 and Friday 08:00 - 12:00 Pay Rate - 18- 25 depends on experience. Ideal candidate would have a knowledge of semi-automated machines using PLC, electrical and pneumatic controls to be able to fault find and repair these machines, finding root cause and complete planned maintenance to prevent these machines from breaking. Main responsibilities will include: Maintaining production equipment and follow the target requirement. Writing technical documents to define procedures, including cell maintenance instructions including defining of TPM schedules. Managing an existing Planned Maintenance system, perform tasks to predetermined schedule, identifying potential operator owned tasks to sustain process up time & maximise capacity. Managing PM system & calibration of production ATE systems. Managing gas regulator servicing and repair. Identifying & ensure sufficient spares are available to provide adequate response time regarding component failure. If this position is for you and you have the relevant experience, apply now. Any job offer is subject to a pass on the Drug Screening test INDSTA
May 13, 2024
Seasonal
Team Jobs is currently seeking for candidate with Engineering experience, starting from May 2024. The perfect candidate have can do attitude and 2 years of experience in a technician role within a manufacturing industry.We are looking with a Engineering background and practical experience who can start without deep training and is ready for the role. Job type: Full time Monday - Thursday 08:00 - 16:45 and Friday 08:00 - 12:00 Pay Rate - 18- 25 depends on experience. Ideal candidate would have a knowledge of semi-automated machines using PLC, electrical and pneumatic controls to be able to fault find and repair these machines, finding root cause and complete planned maintenance to prevent these machines from breaking. Main responsibilities will include: Maintaining production equipment and follow the target requirement. Writing technical documents to define procedures, including cell maintenance instructions including defining of TPM schedules. Managing an existing Planned Maintenance system, perform tasks to predetermined schedule, identifying potential operator owned tasks to sustain process up time & maximise capacity. Managing PM system & calibration of production ATE systems. Managing gas regulator servicing and repair. Identifying & ensure sufficient spares are available to provide adequate response time regarding component failure. If this position is for you and you have the relevant experience, apply now. Any job offer is subject to a pass on the Drug Screening test INDSTA
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities •Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I - III repairs to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understand, and use all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • With the R&M Supervisor, perform and report, a complete and accurate failure analysis in a timely manner. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately. • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Supervisor, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Supervisor with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Supervisor, Asset Manager and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. Qualifications Essential: •5 years' experience in oilfield R&M Activities. •Strong hands on technical background. •Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. •Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: •HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. •Previous experience of Drilling Services Repair and Maintenance activities •Working with hazardous materials & radioactive elements. •Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
May 09, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities •Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I - III repairs to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understand, and use all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • With the R&M Supervisor, perform and report, a complete and accurate failure analysis in a timely manner. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately. • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Supervisor, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Supervisor with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Supervisor, Asset Manager and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. Qualifications Essential: •5 years' experience in oilfield R&M Activities. •Strong hands on technical background. •Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. •Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: •HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. •Previous experience of Drilling Services Repair and Maintenance activities •Working with hazardous materials & radioactive elements. •Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities • Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I - II repairs to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understand, and use all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • With the R&M Supervisor, perform and report, a complete and accurate failure analysis in a timely manner. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately. • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Supervisor, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Supervisor with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Supervisor, Asset Manager and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. Qualifications Essential: • 2-3 years' experience in oilfield R&M Activities. • Strong hands on technical background. • Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: • HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. • Previous experience of Drilling Services Repair and Maintenance activities. •Working with hazardous materials & radioactive elements. •Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
May 09, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities • Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I - II repairs to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understand, and use all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • With the R&M Supervisor, perform and report, a complete and accurate failure analysis in a timely manner. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately. • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Supervisor, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Supervisor with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Supervisor, Asset Manager and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. Qualifications Essential: • 2-3 years' experience in oilfield R&M Activities. • Strong hands on technical background. • Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: • HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. • Previous experience of Drilling Services Repair and Maintenance activities. •Working with hazardous materials & radioactive elements. •Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities • Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I repairs under direct supervision to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understands, and uses all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • Ability to perform Failure analysis and update analysis in the Reliability database. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Manager, Lead Technician, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Manager - Lead Technician with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Manager, Asset Manager, Lead Technician, and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times Qualifications Essential: • 1 - 2 years' experience in oilfield R&M activities. • Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. • Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: • HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. • Previous experience of Drilling Services Repair and Maintenance activities. • Working with hazardous materials, radioactive elements & explosives. • Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
May 09, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities • Must understand and comply with all safety rules and company policies of Weatherford. • Know and understand Weatherford Quality Policy; comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Work Instructions. • Carry out work assignments with the highest level of service delivery. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. • Participates in all daily operations & safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools. • Maintains equipment, facilities, and work area in a presentable and safe working condition. • Perform Level I repairs under direct supervision to LWD & RSS equipment including tool string assembly and disassembly, tool testing and verification, updating associated systems and documentation. • Ability to read, understands, and uses all Bill of Materials and Drawings. • Ability to perform Gamma Verifications-Calibrations, Neutron Density Calibrations, MFR Air Hangs, Pulser Wet Test with Main valve tip and orifice replacement, IDS Check stand roll test, and complete all paperwork and PFT's associated with all verifications and calibrations, and file accordingly. • Ability to perform Failure analysis and update analysis in the Reliability database. • Completes Work Orders, Asset In Repair Tracking (AIRT), Process Flow Travellers (PFT), Forms, Checklists, Repair Requests and ensures all relevant databases are maintained accurately • Receive and pass training on ESD protection, soldering techniques, Lithium Battery Safety, and Radiation safety. • Perform assembly, and disassembly to Lithium Batteries. • Communicate with R&M Manager, Lead Technician, Manufacturing, and R&D on the performance of new and old technology to ensure the quality of the LWD systems are at the highest standards. • Coordinate with the R&M Manager - Lead Technician with daily operations by inputting solutions and ideas for all concerns of LWD R&M operations. • Coordinate all repairs with the R&M Manager, Asset Manager, Lead Technician, and other R&M technicians keeping track of assets incoming, and outgoing. • Ensure all tools and equipment used in the workshop are maintained correctly and within calibration and updated within the Test, Measurement and Diagnostic (TMDE) system. • Complies with the WO labour time log by accurately clocking in/Out of WO (Work Orders) Time tracking system. • Demonstrates leadership, ethical behaviour, and adherence to Weatherford standards at all times Qualifications Essential: • 1 - 2 years' experience in oilfield R&M activities. • Excellent communication, organisation, troubleshooting, problem solving and teamwork skills. • Positive attitude and a high degree of self-discipline and motivation. • Ability to generate clear and concise reports in a timely and professional manner. • Proficient using Microsoft Office. • Capable of multitasking and working effectively to meet required deadlines. Preferred: • HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. • Previous experience of Drilling Services Repair and Maintenance activities. • Working with hazardous materials, radioactive elements & explosives. • Awareness of NDT, NDE and ATEX policies & principles. • Knowledge and prior experience of software & hardware installation on Surface Computer Systems.
Company Profile You must reside and have the right to work within the UK ROV Piloting experience is essential for applying to this opening Oceaneering are currently recruiting to support the continued growth in our Europe Region with a sign-on bonuses up to £3,000 available Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Responsible for supervising the operation of as required for Oceaneering Subsea Robotics Equipment Operations (Remotely Operated Vehicles, IWOCS and RWOCS Systems, Tensioning and Reel Systems) in a safe and efficient manner, to include the maintenance, repair and troubleshooting of all electronic, electrical, mechanical, and hydraulic systems and sub-systems. Functions • Responsible for operating and training of operators of Remotely Operated Vehicles, Workover Control Systems, Tensioning Systems and Reel Systems. • Supervise the maintenance and repairs on electrical, hydraulic, and mechanical units/equipment, the use of test equipment, calibration and alignment, and the performance of general housekeeping and corrosion control. • Manage crew and customer work scheduling. • Maintain communications and good relations with offshore work location leadership, crew and fellow Oceaneering crew members, write reports, and maintain records. • Manage and support all required safety programs of Oceaneering and Oceaneering clients. • Integrate system modifications (advanced skills): design, build, and interface electrical and hydraulic systems, maintain technical documentation, and design and construct mounting systems. • Able to direct the integration of and guide in operation of all tooling including but not limited to cutters, pump units, multipurpose skids, dredging systems, standalone sensory systems, and any other tooling integrated to the Remotely Operated Vehicle. • Maintain parts and supplies inventories associated with all electrical, electronic, mechanical, and hydraulic assemblies and subassemblies. Qualifications Qualifications (Requires Regional Variance) REQUIRED • A minimum of three (3) to five (5) years offshore operations experience and completion of all competencies as dictated by Competency System. • Must be able to obtain a valid Passport and any other regionally mandated offshore work requirement documents as appropriate. PREFERRED • Technical/Associates degree or higher. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
May 09, 2024
Full time
Company Profile You must reside and have the right to work within the UK ROV Piloting experience is essential for applying to this opening Oceaneering are currently recruiting to support the continued growth in our Europe Region with a sign-on bonuses up to £3,000 available Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Responsible for supervising the operation of as required for Oceaneering Subsea Robotics Equipment Operations (Remotely Operated Vehicles, IWOCS and RWOCS Systems, Tensioning and Reel Systems) in a safe and efficient manner, to include the maintenance, repair and troubleshooting of all electronic, electrical, mechanical, and hydraulic systems and sub-systems. Functions • Responsible for operating and training of operators of Remotely Operated Vehicles, Workover Control Systems, Tensioning Systems and Reel Systems. • Supervise the maintenance and repairs on electrical, hydraulic, and mechanical units/equipment, the use of test equipment, calibration and alignment, and the performance of general housekeeping and corrosion control. • Manage crew and customer work scheduling. • Maintain communications and good relations with offshore work location leadership, crew and fellow Oceaneering crew members, write reports, and maintain records. • Manage and support all required safety programs of Oceaneering and Oceaneering clients. • Integrate system modifications (advanced skills): design, build, and interface electrical and hydraulic systems, maintain technical documentation, and design and construct mounting systems. • Able to direct the integration of and guide in operation of all tooling including but not limited to cutters, pump units, multipurpose skids, dredging systems, standalone sensory systems, and any other tooling integrated to the Remotely Operated Vehicle. • Maintain parts and supplies inventories associated with all electrical, electronic, mechanical, and hydraulic assemblies and subassemblies. Qualifications Qualifications (Requires Regional Variance) REQUIRED • A minimum of three (3) to five (5) years offshore operations experience and completion of all competencies as dictated by Competency System. • Must be able to obtain a valid Passport and any other regionally mandated offshore work requirement documents as appropriate. PREFERRED • Technical/Associates degree or higher. Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
MBDA Missile Systems - Deliver for a more secure tomorrow Salary: £36,204 + bonus and benefits The Opportunity An opportunity has arisen for an Electrical Maintenance Operator to join an improving team within the Calibration & Maintenance Department. This will involve working in an autonomous capacity, maintaining process and plant equipment. The work is extremely varied, challenging and rewarding. What are we looking for from you? Experience in the maintenance and repair of plant and process equipment (CCA process equipment experience desirable). Proactive attitude to daily tasking. Good IT skills, knowledge of SAP an advantage. Innovative, team player who has a passion for calibration and maintenance activities. Able to deal with multiple issues, tasks and priorities concurrently. Commitment and integrity. Good attitude to quality and safety. Desirable: 17th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Time served apprenticeship required: Manufacturing Engineering, either: Vocational G or H Units with Further Education, or Vocational TR23/TR21 Units with Further Education or Vocational NVQ3 with Further Education Minimum further education requirement: City & Guilds Parts 1,2 & 3 or ONC/HNC What to expect: We offer opportunities for career progression, paid overtime (subject to level), bonus scheme, comprehensive pension package, annual salary review, collaborative working environment and excellent on-site facilities. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK requires all employees to achieve appropriate clearances.
Sep 24, 2022
Full time
MBDA Missile Systems - Deliver for a more secure tomorrow Salary: £36,204 + bonus and benefits The Opportunity An opportunity has arisen for an Electrical Maintenance Operator to join an improving team within the Calibration & Maintenance Department. This will involve working in an autonomous capacity, maintaining process and plant equipment. The work is extremely varied, challenging and rewarding. What are we looking for from you? Experience in the maintenance and repair of plant and process equipment (CCA process equipment experience desirable). Proactive attitude to daily tasking. Good IT skills, knowledge of SAP an advantage. Innovative, team player who has a passion for calibration and maintenance activities. Able to deal with multiple issues, tasks and priorities concurrently. Commitment and integrity. Good attitude to quality and safety. Desirable: 17th Edition IET Wiring Regulations, IET Code of Practice for In-Service inspection & Testing of Electrical Equipment. Time served apprenticeship required: Manufacturing Engineering, either: Vocational G or H Units with Further Education, or Vocational TR23/TR21 Units with Further Education or Vocational NVQ3 with Further Education Minimum further education requirement: City & Guilds Parts 1,2 & 3 or ONC/HNC What to expect: We offer opportunities for career progression, paid overtime (subject to level), bonus scheme, comprehensive pension package, annual salary review, collaborative working environment and excellent on-site facilities. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK requires all employees to achieve appropriate clearances.